The Company “VENTS” has expanded the variety of electric accessories with new products for ventilation, air conditioning and heating.
The new items are designed to arrange control and automation systems for basic ventilation unit parameters, i.e. pressure, temperature and power.
The pressure differential switch is used to determine possible air pressure rarefaction or air (non-aggressive gases) pressure drop. It is used in ventilation systems to determine air filter clogging degree or belt breaking in centrifugal fans, etc. The pressure switch DTV 500 has reliable plastic design, high actuation accuracy set by set by turning the disk in the casing. The pressure switch is designed for wall mounting or installation into air ducts on the mounting bracket.
The thermostat is used to prevent freezing of water heaters and heat exchangers according to exhaust air temperature readings. The thermostats is designed for regulation of air temperature, temperature of liquids and gases and are widely used in electric water heaters, dishwashing and clothe washing machines, drying machines, electric furnaces, etc. The operating logic is based on volumetric thermal extension. Easy mounting on the wall surface or installation in the duct in any position with screws.
Electric triac temperature controller PULSER-M
The triac controller designed for control of electric heater power output of single- and double-phased electric heaters. The controller is equipped with a built-in temperature sensor and its casing has an integral regulator with input terminals for a main sensor together with min. or max. limit sensors. The temperature controller selects required voltage automatically depending on 230 or 400 V power mains. P or PI control law is selected automatically.
Duct temperature sensor is used jointly with temperature controller PULSER-M and is installed directly into air duct by fixing it to wall with a flange. The sensor is supplied with a connecting cable that enables the adjustable immersion cable of the sensor. The product range includes various sensors with different temperature sensitivity range.
Use our new products to arrange efficient automation system to control ventilation, conditioning and heating processes and enjoy fresh air in your house!
For more detailed information on new electric equipment refer “Download” at our site, section “Electrical Accessories”.
