Privacy Policy (GDPR)
Not registered yet? Take advantages of registration:
Products saving in a binding to the projects
Product consultation from our experts - Online
By using this form, you confirm that you have read the site terms of use Terms of use and completely accept the terms of use

VENTS 100 LD (220/60)

  • Description
  • Characteristics
  • Downloads
  • Options
  • Dimensions
  • Additional diagrams
  • Continuous or periodic exhaust ventilation of bathrooms, showers, kitchens and other utility spaces.
  • Ventilation shaft mounting or duct connection.
  • Low to medium air flow motion for short distances at low air resistance.
  • Compatible with Ø 100, 125 and 150 mm air ducts.
  • Modern design and aesthetic look.
  • The casing and the impeller are made of high-quality durable ABS plastic, UV resistant.
  • Various decorative plates for the front panel of the natural aluminum.
  • The intellectual impeller design makes the fan efficiency high and the service life long.
  • Protection rating IP34.
  • Reliable and low-watt electric motor.
  • Designed for continuous operation and requires no maintenance.
  • Equipped with overheating protection.


  • The fan is controlled by a room light switch. It is not included in the delivery set.
  • The fan is controlled by the built-in pull cord switch V. Not applied in case of ceiling mounting.
  • Speed control is possible through a thyristor speed controller (see Electrical Accessories). Several fans may be connected to the same controller. Speed controllers can not be connected to the fans with Т, ТН, ТР, , VТН modifications.


  • By the BU-1-60 electronic control unit.
  • By the T timer (the built-in turn-off delay timer enables the fan operation within 2 to 30 minutes after the fan switching off).
  • By the humidity sensor and the TH timer (if the humidity level in the room exceeds the sensor threshold adjustable value within 60-90 % the fan switches automatically on and operates until the humidity level drops to the standard level, after that the fan continues operating within the time period according to the timer setting, then shuts down).
  • The fan is mounted directly into the ventilation shaft.
  • In case of remote location of the ventilation shaft flexible air ducts may be used. The air duct is connected to the fan exhaust flange through a clamp.
  • Fixed to the wall by means of screws.
  • Suitable for ceiling mounting.
  • To connect a fan with a 12 V low voltage motor to 220 V/50 Hz power mains, it is necessary to purchase a step-down transformer (e.g. the TRF 220/12-25 transformer).
Parameter Value Measurement unit
Duct diameter 100 mm
Engine Type 220V / 60Hz -
Design axial -
Voltage 220 V
Frequency 60 Hz
Power consumption 11.29 W
Air capacity 82 m³/h
Pressure 42 Pa
Current 0.074 A
Sound pressure level at 3 m 33 dBА
Spigot size 100 mm
IP Code IP 34 -
Type exhaust -
Mounting wall mounting , ceiling mounting -
Files archieve
Brochure "VENTS LD" (pdf 4.04Mb)
Download high quality image "VENTS LD" (psd 2.59Mb)
Certificate CB Test Report "LD,LD Fresh Time" (pdf 1.96Mb)
Certificate GS "LD,LD Fresh Time" (pdf 292.02Kb)
Declaration of сonformity "LD" (pdf 1.55Mb)
User's manual "VENTS domestic fans" (pdf 3.85Mb)
Download image "VENTS LD" for your website (png 516.96Kb)
Certificate GS "K,K1,PF,М,D,S,LD,М1,+L" (pdf 124.5Kb)
Certificate GS "X,X1,Modern,LD,LD Fresh time" (pdf 166.94Kb)
Certificate LVD "K,K1,PF,М,D,S,LD,М1,+L" (pdf 270.89Kb)
Certificate LVD "K,K1,PF,М,D,S,LD,М1,MA+turbo (12V)" (pdf 473.42Kb)
Declaration of сonformity RoHS "Domestic fans VENTS" (pdf 1.34Mb)
Certificate LVD "X,X1,Modern,LD,LD Fresh time" (pdf 205.34Kb)
Download high quality image "VENTS LDA" (psd 2.87Mb)
Download image "VENTS LDA" for your website (png 722.65Kb)
Download high quality image "VENTS LDA chrome" (psd 2.5Mb)
Download image "VENTS LDA chrome" for your website (png 555.93Kb)
Download high quality image "VENTS LDA gold" (psd 2.5Mb)
Download image "VENTS LDA gold" for your website (png 465Kb)
Download high quality image "VENTS LD alulak" (psd 2.66Mb)
Download image "VENTS LD alulak" for your website (png 626.1Kb)
Download high quality image "VENTS LD alumat" (psd 2.7Mb)
Download image "VENTS LD alumat" for your website (png 682.1Kb)
Modification name
VENTS 100 LD (220/60)
VENTS 100 LD (220/60)
Parameter Value Measurement unit
∅D 100 mm
B 152 mm
H 120 mm
L 126 mm
L1 30 mm
Additional diagrams
Additional diagrams

Designation key
Designation key
  LDA The fan with a ground alumunium front panel.
  LDA gold The fan with a gold-tinted aluminium front panel.
  LDA chrome The fan with a mirror finish aluminium front panel.
  LD alumat The fan with a front panel painted silver (matt).
  LD alulak The fan with a front panel painted silver (gloss).
  LD1 Shortened branch pipe model.
LD K Fan is equipped with a backdraft damper for back flow preventing.
LD L The motor is equipped with ball bearings for long service life (appr. 40 thousand hours) and fan mounting at any angle. The bearings are maintenance-free and contain enough grease for the entire operating period.
LD turbo High-powered motor.
LD 12 Modification with low-voltage motor. 12 V AC power supply.
LDT Equipped with a regulated timer with the operating time from 2 to 30 minutes.
LDTH Equipped with a timer with the operating time from 2 to 30 minutes and a humidity sensor with the threshold value from 60 to 90 %.
LDV Equipped with a pull cord switch.
LDVT Equipped with a pull cord switch and a regulated timer with the operating time adjustable from 2 to 30 minutes.
LDVTH Equipped with a pull cord switch, regulated timer with the operating time adjustable from 2 to 30 minutes and a humidity sensor with the operating threshold range from 60 to 90 %.
Example of installation
Example of installation

Share your opinion
I found this page useful to select the required products easy and quick
No difficulties with the site use. Everything is logical ad clear
The site produced a nice impression

How often do you use equipment selection program?