Login

Privacy Policy (GDPR)
Authorization
Not registered yet? Take advantages of registration:
Products saving in a binding to the projects
Product consultation from our experts - Online
Registration
Signup
By using this form, you confirm that you have read the site terms of use Terms of use and completely accept the terms of use

VENTS 100 LDVTH K L turbo

  • Characteristics
  • Capacity diagram
  • Downloads
  • Options
  • Dimensions
  • Wiring plan
Characteristics
Characteristics
Parameter Value Measurement unit
Duct diameter 100 mm
Design axial -
Voltage 220-240 V
Frequency 50/60 Hz
Power consumption 16 W
Air capacity 115 m³/h
Current 0.1 A
RPM 2300 min-1
Sound pressure level at 3 m 36 dBА
Spigot size 100 mm
Engine Type 220-240V / 50-60Hz -
Protection rating IP 34 -
Mass 0.68 kg
Type exhaust -
Mounting wall mounting , ceiling mounting -
Capacity diagram
Capacity diagram
  • Selection method:
  • Air flow:
  • Pressure:
Operating point
  • Air flow: --
  • Pressure: ---
Files archieve
Downloads
Name
Brochure "VENTS LD" (pdf 4.04Mb)
Download high quality image "VENTS LD" (psd 2.59Mb)
Certificate CB Test Report "LD,LD Fresh Time" (pdf 1.96Mb)
Certificate GS "LD,LD Fresh Time" (pdf 292.02Kb)
Declaration of сonformity "LD" (pdf 1.55Mb)
Download image "VENTS LD" for your website (png 516.96Kb)
Certificate GS "K,K1,PF,М,D,S,LD,М1,+L" (pdf 124.5Kb)
Certificate GS "X,X1,Modern,LD,LD Fresh time" (pdf 166.94Kb)
Certificate LVD "K,K1,PF,М,D,S,LD,М1,+L" (pdf 270.89Kb)
Certificate LVD "K,K1,PF,М,D,S,LD,М1,MA+turbo (12V)" (pdf 473.42Kb)
User's manual “VENTS domestic fans” (pdf 3.29Mb)
Declaration of сonformity RoHS "Domestic fans VENTS" (pdf 1.34Mb)
Certificate LVD "X,X1,Modern,LD,LD Fresh time" (pdf 205.34Kb)
Download high quality image "VENTS LDA" (psd 2.87Mb)
Download image "VENTS LDA" for your website (png 722.65Kb)
Download high quality image "VENTS LDA chrome" (psd 2.5Mb)
Download image "VENTS LDA chrome" for your website (png 555.93Kb)
Download high quality image "VENTS LDA gold" (psd 2.5Mb)
Download image "VENTS LDA gold" for your website (png 465Kb)
Download high quality image "VENTS LD alulak" (psd 2.66Mb)
Download image "VENTS LD alulak" for your website (png 626.1Kb)
Download high quality image "VENTS LD alumat" (psd 2.7Mb)
Download image "VENTS LD alumat" for your website (png 682.1Kb)
Modifications
Modifications
Modification name Backdraft damperHumidity sensorTimerPull-cord switchBall bearing motorHigh-powered fan
VENTS 100 LDVTH K L turbo
+
Dimensions
Characteristics
VENTS 100 LD turbo
Parameter Value Measurement unit
∅D 100 mm
B 152 mm
H 120 mm
L 126 mm
L1 30 mm
Wiring plan
Wiring plan
Wiring diagram for the fans equipped with a built-in switch Wiring diagram for the fans without built-in switch
Wiring diagram for the fans equipped with a timer / timer, humidity sensor and a built-in switch Wiring diagram for the fans equipped with a timer / timer with a humidity sensor without built-in switch
Wiring diagram for the fans with a light lamp. Separate activation of the fan and the built-in lamp. Wiring diagram for the fans with a light lamp. Parallel activation of the fan and the built-in lamp.
Wiring diagram for the fans with an light lamp and grounding. Separate activation of the fan and the built-in lamp. Wiring diagram for the fans with a light lamp and grounding. Parallel switching of the fan and the built-in lamp.
Wiring diagram for the fans with grounding  
 

* - only for fans designed for 12 V rated voltage (specified on the fan casing and packing).
S, S1, S2 - external switches.

Operating logic of the fans with optional equipment
  • The fan equipped with a timer is activated by the control voltage supplied to LT input. After the control voltage is disconnected the fan continues operating within the time period within 2 to 30 minutes according to the timer settings. The turn-off delay time is adjusted by turning the respective potentiometer T control knob clockwise to increase and counter-clockwise to reduce it.
  • The fan equipped with a timer and humidity sensor is activated by the control voltage supplied to LT input or in case of exceeding the preset humidity threshold value adjustable from ~60% to ~90%. After the control voltage is disconnected or as the humidity level H drops below the set threshold the fan continues operating within the time period within 2 to 30 minutes according to the timer settings.  The turn-off delay time and the threshold humidity level are adjusted by turning the control knob of the respective potentiometer T for timer and H for humidity sensor clockwise to increase and counter-clockwise to reduce the set value. To set the maximum humidity level (90%) set the potentiometer control knob for H max position.
  • The fan equipped with a timer and motion sensor is activated in case of the moving detection at the distance from 1 m to 4 m with 100° detection angle. After motion is off the fan continues operating within the time period within 2 to 30 minutes according to the timer settings. The turn-off delay time is adjusted by turning the respective potentiometer T control knob clockwise to increase and counter-clockwise to reduce it.
  • Wiring diagram for connection of the light lamp to the fan timer operated by the common switch is shown on diagram 4. Upon the light lamp disconnection the fan continues operating according to the timer setting within the set time period.
Designation key
Designation key
PICTURE SYMBOL DESIGNATION MODIFICATION DESCRIPTION
  LDA The fan with a ground alumunium front panel.
  LDA gold The fan with a gold-tinted aluminium front panel.
  LDA chrome The fan with a mirror finish aluminium front panel.
  LD alumat The fan with a front panel painted silver (matt).
  LD alulak The fan with a front panel painted silver (gloss).
  LD1 Shortened branch pipe model.
LD K Fan is equipped with a backdraft damper for back flow preventing.
LD L The motor is equipped with ball bearings for long service life (appr. 40 thousand hours) and fan mounting at any angle. The bearings are maintenance-free and contain enough grease for the entire operating period.
LD turbo High-powered motor.
LD 12 Modification with low-voltage motor. 12 V AC power supply.
LDT Equipped with a regulated timer with the operating time from 2 to 30 minutes.
LDTH Equipped with a timer with the operating time from 2 to 30 minutes and a humidity sensor with the threshold value from 60 to 90 %.
LDV Equipped with a pull cord switch.
LDVT Equipped with a pull cord switch and a regulated timer with the operating time adjustable from 2 to 30 minutes.
LDVTH Equipped with a pull cord switch, regulated timer with the operating time adjustable from 2 to 30 minutes and a humidity sensor with the operating threshold range from 60 to 90 %.
Example of installation
Example of installation

AccessoriesSimilar products
Share your opinion
I found this page useful to select the required products easy and quick
No difficulties with the site use. Everything is logical ad clear
The site produced a nice impression

Questionnaire
How often do you use equipment selection program?