Privacy Policy (GDPR)
Not registered yet? Take advantages of registration:
Products saving in a binding to the projects
Product consultation from our experts - Online
By using this form, you confirm that you have read the site terms of use Terms of use and completely accept the terms of use

VENTS 100 MAT (220/60)

  • Description
  • Characteristics
  • Downloads
  • Options
  • Dimensions
  • Additional diagrams
  • Continuous or periodic exhaust ventilation of bathroom, showers, kitchens and other utility spaces.
  • Ventilation shaft mounting or duct connection.
  • Low to medium air flow motion for short distances at low air resistance.
  • Compatible with 100, 125 and 150 mm air ducts.
  • Modern design and aesthetic look.
  • The casing and the impeller are made of high-quality durable ABS plastic, UV resistant.
  • The intellectual impeller design makes the fan efficiency high and the service life long.
  • The fan is equipped with a thermal actuator that provides smooth opening and closing of the automatic louvre shutters to prevent back draft.
  • Protection rating IP 24.
  • Reliable and low-watt electric motor.
  • Designed for continuous operation and requires no maintenance.
  • Equipped with overheating protection.


  • The fan is controlled by a room light switch. It is not included in the delivery package.
  • The fan is controlled by the built-in pull cord switch V. Not applied in case of ceiling mounting.
  • Speed control is possible through a thyristor speed controller (see Electrical Accessories). Several fans may connected to the same controller. Speed controllers can not be connected to the fans with TTHTPVTVTH modification.


  • By the electronic control unit BU-1-60 (see Electrical Accessories). The control unit is supplied separately.
  • By the timer T (the built-in run-out timer enables the fan operation within 2 to 30 minutes after the fan switching off).
  • By the humidity sensor and timer TH (if the humidity level in the room exceeds the sensor threshold adjustable value within 60-90% the fan switches automatically on and operates until the humidity level drops to the standard level, after that the fan continues operating with in the time period according to the timer setting, then shuts down).
  • By the motion sensor and the timer TP (in case of motion detection the fan switches automatically on and operates within the set time period from 2 to 30 minutes. The motion sensitivity area is up to 4 meters and the maximum detection angle is 100°.
  • The fan is mounted directly into the ventilation shaft.
  • Flexible duct application is recommended in case of remote location of the ventilation shaft. The air duct is connected to the fan exhaust flange through a clamp.
  • Fixed to the wall by self-tapping screws.
  • Suitable for ceiling mounting.
  • Flange of 92 mm length for easy mounting into concrete walls and floor decks up to 100 mm thick.
  • For 12 V low-voltage motor fan connection to 220 V / 50 Hz power mains use the step-down transformer TRF 220/12-25 that is available upon separate order.
Parameter Value Measurement unit
Duct diameter 100 mm
Engine Type 220V / 60Hz -
Design axial -
Voltage 220 V
Frequency 60 Hz
Power consumption 12.09 W
Air capacity 77 m³/h
Pressure 30 Pa
Current 0.08 A
Sound pressure level at 3 m 37 dBА
Spigot size 100 mm
IP Code IP 24 -
Type exhaust -
Mounting wall mounting , ceiling mounting -
Files archieve
Brochure "VENTS MA" (pdf 4.4Mb)
Download high quality image "VENTS MA" (psd 2.52Mb)
Declaration of сonformity "МА,MA L,+turbo,+press" (pdf 1.75Mb)
Certificate CB Test Report "MA" (pdf 6.09Mb)
Certificate GS "MA" (pdf 108.3Kb)
Certificate LVD "MA" (pdf 156.23Kb)
User's manual "VENTS domestic fans" (pdf 3.85Mb)
Download image "VENTS MA" for your website (png 537.98Kb)
Certificate GS "MA,MA L" (pdf 122.67Kb)
Certificate LVD "MA,MA L" (pdf 252.76Kb)
Certificate LVD "K,K1,PF,М,D,S,LD,М1,MA+turbo (12V)" (pdf 473.42Kb)
Declaration of сonformity RoHS "Domestic fans VENTS" (pdf 1.34Mb)
Modification name Timer
VENTS 100 MAT (220/60)
VENTS 100 MA (220/60)
Parameter Value Measurement unit
∅D 100 mm
B 165 mm
B1 150 mm
B2 150 mm
H 150 mm
L 92 mm
L1 32 mm
Additional diagrams
Additional diagrams

Picture symbol   Designation   Modification description
  MA L   The motor is equipped with ball bearings for long service life (appr. 40 thousand hours) and fan mounting at any angle. The bearings are maintenance-free and contain enough grease for the entire operating period.
  МA turbo   High-powered motor.
  MA press   5-blade low-noise impeller with improved aerodynamics for higher fan capacity.
  МA 12   Modification with low-voltage motor. 12 V AC power supply.
  MAT   Equipped with a regulated timer with the operating time from 2 to 30 minutes.
  MATH   Equipped with a timer with the operating time from 2 to 30 minutes and a humidity sensor with the threshold value from 60 to 90%.
  MAV   Equipped with a pull cord switch.
  МAVТ   Equipped with a pull cord switch and a regulated timer with the operating time adjustable from 2 to 30 minutes.
  MAVТН   Equipped with a pull cord switch, regulated timer with the operating time adjustable from 2 to 30 minutes and a humidity sensor with the operating threshold range from 60% to 90%.
  МAТР   Equipped with a regulated timer and a motion sensor with the sensitivity area from 1 to 4 m and the detection angle up to 100°).
Example of installation
Example of installation

Share your opinion

Is our site helpful for your business development?