Privacy Policy (GDPR)
Not registered yet? Take advantages of registration:
Products saving in a binding to the projects
Product consultation from our experts - Online
By using this form, you confirm that you have read the site terms of use Terms of use and completely accept the terms of use

VENTS 125 XT turbo (220/60)

  • Description
  • Characteristics
  • Downloads
  • Options
  • Dimensions
  • Additional diagrams
  • Continuous or periodic exhaust ventilation of bathroom, showers, kitchens and other utility spaces.
  • Ventilation shaft mounting or duct connection.
  • Low to medium air flow motion for short distances at low air resistance.
  • Compatible with 100, 125 and 150 mm air ducts.
  • Modern design and aesthetic look.
  • The casing and the impeller are made of high-quality durable ABS plastic, UV resistant.
  • The intellectual impeller design makes the fan efficiency high and the service life long.
  • Decorative replaceable colour covers: light blue, bright green, yellow and pink.
  • Protection rating IP 24.
  • Reliable and low-watt electric motor.
  • Designed for continuous operation and requires no maintenance.
  • Equipped with overheating protection.


  • The fan is controlled by a room light switch. It is not included in the delivery package.
  • The fan is controlled by the built-in pull cord switch V. Not applied in case of ceiling mounting.
  • Speed control is possible through a thyristor speed controller (see Electrical Accessories). Several fans may connected to the same controller. Speed controllers can not be connected to the fans with TTHTPVTVTH modification.


  • By the electronic control unit BU-1-60 (see Electrical Accessories). The control unit is supplied separately.
  • By the timer T (the built-in run-out timer enables the fan operation within 2 to 30 minutes after the fan switching off).
  • By the humidity sensor and timer TH (if the humidity level in the room exceeds the sensor threshold adjustable value within 60-90% the fan switches automatically on and operates until the humidity level drops to the standard level, after that the fan continues operating within the time period according to the timer setting, then shuts down).
  • The fan is mounted directly into the ventilation shaft.
  • Flexible duct application is recommended in case of remote location of the ventilation shaft. The air duct is connected to the fan exhaust flange through a clamp.
  • Fixed to the wall by self-tapping screws.
  • Suitable for ceiling mounting.
  • For 12 V low-voltage motor fan connection to 220 V / 50 Hz power mains use the step-down transformer TRF 220/12-25 that is available upon separate order.
Parameter Value Measurement unit
Duct diameter 125 mm
Engine Type 220V / 60Hz -
Design axial -
Voltage 220 V
Frequency 60 Hz
Power consumption 17.76 W
Air capacity 170 m³/h
Pressure 50 Pa
Current 0.121 A
Sound pressure level at 3 m 41 dBА
Spigot size 125 mm
IP Code IP 24 -
Type exhaust -
Mounting wall mounting , ceiling mounting -
Files archieve
Brochure "VENTS X" (pdf 4Mb)
Certificate CB Test Report "X,X1" (pdf 10.06Mb)
Certificate GS "X,X1" (pdf 506.28Kb)
Download high quality image "VENTS X" (psd 2.05Mb)
Declaration of сonformity "X,X L,X1,X1 L" (pdf 1.77Mb)
User's manual "VENTS domestic fans" (pdf 3.85Mb)
Download image "VENTS X" for your website (png 475.36Kb)
Certificate GS "X,X1,Modern,LD,LD Fresh time" (pdf 166.94Kb)
Certificate LVD "X,X1,Modern,LD,LD Fresh time" (pdf 205.34Kb)
Declaration of сonformity RoHS "Domestic fans VENTS" (pdf 1.34Mb)
Download high quality image "VENTS X alumat" (psd 3.17Mb)
Download image "VENTS X alumat" for your website (png 537.58Kb)
Modification name TimerHigh-powered fan
VENTS 125 XT turbo (220/60)
VENTS 125 X turbo (220/60)
Parameter Value Measurement unit
∅D 125 mm
B 205 mm
H 140 mm
L 156 mm
L1 58 mm
Additional diagrams
Additional diagrams

Picture symbol   Designation   Modification description
    X alumat   Fan with a matt gray painted front plate.
  X К   Fan is equipped with a backdraft damper for back flow preventing.
  X L   The motor is equipped with ball bearings for long service life (appr. 40 thousand hours) and fan mounting at any angle. The bearings are maintenance-free and contain enough grease for the entire operating period.
  X turbo   High-powered motor.
  X 12   Modification with low-voltage motor. 12 V AC power supply.
  XT   Equipped with a regulated timer with the operating time from 2 to 30 minutes.
  XTH   Equipped with a timer with the operating time from 2 to 30 minutes and a humidity sensor with the threshold value from 60 to 90%.
  XV   Equipped with a pull cord switch.
  XVТ   Equipped with a pull cord switch and a regulated timer with the operating time adjustable from 2 to 30 minutes.
  XVТН   Equipped with a pull cord switch, regulated timer with the operating time adjustable from 2 to 30 minutes and a humidity sensor with the operating threshold range from 60% to 90%.
Example of installation
Example of installation

Share your opinion

Is our site helpful for your business development?