Privacy Policy (GDPR)
Not registered yet? Take advantages of registration:
Products saving in a binding to the projects
Product consultation from our experts - Online
By using this form, you confirm that you have read the site terms of use Terms of use and completely accept the terms of use

VENTS Quiet-S 100 TH

  • Description
  • Characteristics
  • Downloads
  • Options
  • Dimensions
  • Innovative exhaust fan with stylish design for new comfort level in shower rooms, bathrooms, kitchens and other residential premises.
  • Maximum air capacity combined with low noise level provide the ideal microclimate.
  • Mounting into ventilation shafts or connection to Ø 100 mm.
The delivery set includes three decorative panels in white, blue and green.
  • Casing and impeller made of high-quality and durable UV-resistant plastic.
  • Specially designed impeller aerodynamic profile provides high air capacity and low noise.
  • The compact design enables wall and ceiling mounting.
  • The shortened spigot for mounting into a ventilation shaft or connection to Ø 100 mm air ducts.
  • The fan is equipped with a specially designed back valve to prevent back flow and heat losses during the fan standby.
  • The fan exhaust spigot incorporates specially designed air rectifiers to reduce air turbulence, increase air pressure and lower noise level.
  • High ingress protection rating ensures makes the fan the ideal solution for ventilation of a bathroom. The electronic components are protected with tight covers.
  • Low energy demand 7.5 W due to new highefficient motor.
  • Maintenance-free bearings contain enough grease for 40 000 hrs non-stop operation.
  • Motor on special anti-vibration dampers for vibration absorbing and silent operation.
  • Motor equipped with overheating protection.

Manual control:

  • Manual control with a room light switch. The switch is not included into delivery set.
  • The fan is controlled by the built-in pull cord switch V. Not applied in case of ceiling mounting.
  • Speed control is possible through a thyristor speed controller, see Electrical Accessories. Several fans may connected to the same controller. Speed controllers can not be connected to the fans with TTHVTVTH, TP modification.

Automatic control:

  • By the electronic control unit BU-1-60 ( see Electrical Accessories). The control unit is supplied separately.
  • By the timer T ( the built-in run-out timer enables the fan operation within 2 to 30 minutes after the fan switching off).
  • By the humidity sensor and timer TH ( if the humidity level in the room exceeds the sensor threshold within 60-90% the fan switches automatically on and operates until the humidity level drops to the standard level, after that the fan continues operating within the set time period and shuts down).


  • Installation directly inside a ventilation shaft.
  • Flexible air ducts may be used in case of remote location of the ventilation shaft. Connection of the air duct to the exhaust flange with a clamp.
  • Wall mounting with screws.
  • Suitable for ceiling mounting.
Parameter Value Measurement unit
Voltage 220-240 V
Frequency 50 Hz
Power consumption 7.5 W
Air capacity 99 m³/h
Current 0.049 A
Sound pressure level at 3 m 24 dBА
Weight 0.58 kg
Spigot size 100 mm
Engine Type 220-240V / 50Hz -
Duct diameter 100 mm
Design axial -
IP Code IP 45 -
Type exhaust -
Mounting wall mounting , ceiling mounting -
Files archieve
Modification name Humidity sensorTimer
VENTS Quiet-S 100 TH
VENTS Quiet-S 100
Parameter Value Measurement unit
∅D 99 mm
B 175 mm
L 123 mm
L1 42 mm
Picture symbol   Designation   Modification description
  Quiet-S T   Off-delay timer modification with operating time from 2 to 30 min.
  Quiet-S TH   Off-delay timer modification with the operating time from 2 to 30 min and humidity sensor with threshold from 60 to 90%.
  Quiet-S V   Pull-cord switch modification.
  Quiet-S VT   Modification with pull-cord switch and off-delay timer with operating time from 2 to 30 min.
  Quiet-S VТН   Modification with pull-cord switch, off-delay timer with operating time  from 2 to 30 min and humidity sensor with threshold from 60 to 90%.
  Quiet-S ТР   Modification with off-delay timer with operating time from 2 to 30 min and motion sensor; reach distance up to 4 m, viewing angle up to 100°.

Share your opinion

Where have you learned about us?