AirVENTS AVS: The new generation of professional ventilation

/ Product catalogue / Centralized air handling units / Bespoke units / AirVENTS AVS: The new generation of professional ventilation

Air flow capacity: 1 000 – 20 000 m³/h

Modular frameless casing design

Integrated control system

Wide range of rotary and plate heat exchangers

T2 / TB2 / L1 / D1

The construction of the case with a PVC profile ensures the absence of thermal bridges, minimizes heat loss and reduces the noise level.

Heat exchanger efficiency up to 90 % – efficient in energy saving and reducing ventilation system costs.
Air handling units with a sorption rotor have high efficiency and keep comfortable humidity with low risk of frosting.
High-efficient counter-flow heat exchangers with lower pressure losses. As standard, the regenerators are equipped with a bypass damper.

Electronically commutated direct current motors (EC motors) with an external rotor, equipped with a backward curved impeller, are used.
Such motors with an IE5 class are the most progressive solution for energy saving.
In FanGrids, multiple small fans operate in parallel, rather than having one large fan. This provides redundancy, ensuring fail-safe operation.

Additional option – full factory electric wiring includes:

Installation of air damper actuators. Routing of contacts from actuators to the terminal box.
Installation of differential pressure switches in filter sections. Installation of a relay actuation threshold to the necessary level (final pressure drop according to the selection).
Installation of frost protection thermostats in water heating coils sections.
Installation of the VFD in the rotary heat exchanger section.
Installation of bypass damper actuators in the plate heat exchanger section.
Routing of all electric contacts in the electric heater sections.
Routing of all electric contacts in the fan sections.
Installation and adjustment of all temperature and humidity sensors inside the unit.
All the electric contacts are routed to the junction box, which is mounted in one of the sections.
Plug-and-play option implies the possibility of shipment in separate blocks. In this case, joints and connection boxes are installed between the sections.