Login

Privacy Policy (GDPR)
Authorization
Not registered yet? Take advantages of registration:
Products saving in a binding to the projects
Product consultation from our experts - Online
Registration
Signup
By using this form, you confirm that you have read the site terms of use Terms of use and completely accept the terms of use

VENTS Boost-I 200 EC


Mixed-type duct fans with EC motors in casings with noise and heat insulation. Air flow up to 1210 m³/h.

  • Description
  • Characteristics
  • Downloads
  • Dimensions
  • Additional characteristics
  • Designation key
Description
Description
APPLICATION  
  • The new VENTS Boost-I EC duct fan series is equipped with a special noise-insulated casing which ensures silent operation and excellent aerodynamic characteristics. Compatible with Ø200 up to Ø250 mm air ducts.
  • The VENTS Boost-I EC fans combine the versatility and outstanding performance of both axial and centrifugal fans producing a powerful air flow and high pressure while retaining the signature energy-efficiency and response of EC motors.
  • Several fans can be integrated into a single computer-controlled system with sensor feedback combined with speed control across the entire dynamic range.
  • Application: Combined supply and exhaust ventilation systems of various commercial and industrial spaces with stringent noise requirements (such as libraries, conference halls, classrooms, kindergarten playrooms etc.).
DESIGN  
  • The external casing is made of galvanized steel. Sound and heat insulation is provided by 30 mm acoustic material.
  • Due to the improved mixed type impeller, which is a hybrid of axial and centrifugal impeller, the Boost-I EC has low power consumption and noise level with high performance.
  • The specially designed diffuser, impeller and airflow rectifier at the fan outlet provide smooth air flow distribution and enable the best combination of high air flow, increased pressure and low noise.
  • The fan casing is equipped with an airtight terminal box for connection to power mains.
MOTOR  
  • The fans are equipped with highly efficient electronically commutated EC motors. These state-of-the-art motors are the most advanced solution in energy efficiency today.
  • EC motors are characterised with high performance and optimum control across the entire speed range.
  • In addition to that, the efficiency of the electronically commutated motor reaches very impressive levels of up to 90 %.
SPEED CONTROL  
  • The fan is controlled using a 0-10 V control signal. When the control signal value changes, the EC fan changes its rotation speed and provides air flow required for the ventilation system. 
  • Several fans can be integrated into a single computer-driven control system.
  • Custom designed software provides high accuracy control of the fans integrated into a network. The computer display shows all the system parameters and the operation mode can be set individually for each fan in the network.
MOUNTING  
  • The fans are designed to be used with round air ducts. The fan casing has mounting brackets for convenient installation onto the ceiling. The ducts can be fitted at any angle relative to the fan axis. Make sure to provide sufficient maintenance access during fan installation.
  • Electrical connection and installation must be performed in accordance with the instruction manual and the electrical connections diagram applied to the terminal box.
  • A single system may have several fans installed in parallel to boost the output capacity or in series to boost the working pressure.
Characteristics
Characteristics
Parameter Boost-I 200 EC
Measurement unit
Phase 1 ˜
Voltage 230 V
Power consumption 121 W
Current 0.96 A
Frequency 50/60 Hz
Maximum air capacity 336 l/s
Air capacity 1210 m³/h
EC motor yes -
Maximum air capacity 1210 m³/h
RPM 3100 min-1
Protection rating IP X4 -
Sound pressure level at 3 m 47 dBА
Motor protection rating IP44 -
Duct diameter 200 mm
Transported air temperature -25 ... +55 °С
Design mixed-flow -
Casing material galvanized steel -
Mass 8.2 kg
Outdoor mounting no -
Sound-insulated casing yes -
Duct for round air ducts -
Type supply and exhaust -
Mounting Inline -
Files archieve
Downloads
Select document type
  • Advertising and printing products
  • Certificates
  • Technical documentation
Name
Download high quality image "VENTS Boost-I (EC)" (psd 4.33Mb)
Download image "VENTS Boost-I (EC)" for your website (png 315.63Kb)
"VENTS Boost-I EC" product description 06-2022 (pdf 812.71Kb)
"VENTS Boost-I (EC)" user's manual 09-2022 (V208-2EN-01) (pdf 895.25Kb)
Dimensions
Characteristics
VENTS Boost-I 200 EC
Parameter Value Measurement unit
∅D 199 mm
∅D1 281 mm
B 339 mm
L 601 mm
L1 739 mm
Additional characteristics
Additional characteristics
Sound power level [A-filter] Sound pressure level at a distance of 3 m [A-filter] Sound pressure level at a distance of 1 m [A-filter]
Sound power level General Octave frequency band [Hz]
  Hz 63 125 250 500 1000 2000 4000 8000 LpA, 3 m dBA LpA, 1 m dBA
LwA to inlet dBA 71 67 67 63 59 50 45 44 40 51 61
LwA to outlet dBA 72 68 68 63 61 52 48 47 38 52 62
LwA to environment dBA 68 58 54 64 63 42 42 30 23 47 57
Designation key
Designation key
Series Air duct diameter Motor type Options
VENTS Boost-I: mixed-type duct fan in casings with noise and heat insulation 200; 250 EC: synchronous electronically commutated motor U: speed controller with an electronic thermostat and a temperature sensor integrated inside an air duct. Temperature-based operation logic.
Un: speed controller with an electronic thermostat and a temperature sensor fixed on a 4-meter cable. Temperature-based operation logic.
R: power cord with a mains plug.
P: integrated smooth speed controller.
Share your opinion

Questionnaire
How often do you use equipment selection program?