Vents Boost-I 200 Un

Mixed-flow inline fans in sound-insulated casings
  • Maximum airflow: 1110 m3/h
  • Sound pressure level LpA at 3 m: 44 dB(A)
  • Sound insulation
  • Motor type: AC
  • Control: Speed controller
  • Impeller type: Mixed-flow
  • Casing material: Galvanized steel
  • Installation in any position
  • Cable with mains plug
  • Temperature sensor: Remote
Unit of measurement Boost-I 200 Un
Connected air duct size mm 200
Speed - 1 2 3
Phases - 1
Minimum supply voltage V 230
Maximum supply voltage V 230
Power supply frequency Hz 50
Rated power W 82 104 113
Unit current A 0.37 0.46 0.51
Maximum airflow m3/h 692 906 1110
rotation speed at 50hz - 2229 2634 2823
Sound pressure level LpA at 3 m dB(A) 37 42 44
Weight kg 8.2
Transported air temperature (max) °С 55
Transported air temperature (min) °С -25
Ambient air temperature min °С 1
Ambient air temperature max °С 40
Ingress protection rating - IPX4
Ingress protection rating of the drive - IP20
Trademark Vents
Model Boost-I 200 Un
Type of drive installed Integrated VSD
Type of heat recovery system None
Nominal flow rate (m3/s) 0
Nominal external pressure (Pa) 0
Maximum external leakage rates (%) 0
Static efficiency (%) 0
Declared typology NRVU UVU
Effective electric power input (kW) 0
Sound power level (dB(A)) 0
Datasheet
"VENTS Boost-I" product description 04-2024
999 Kb
Manual
"VENTS Boost-I (EC)" user's manual 04-2024 (V208-2EN-02)
923 Kb
BIM/CAD models
Boost-I (EC)
2.21 Mb
Image
Boost-I 200 Un - image 1
491 Kb
Image
Boost-I 200 Un - image 2
301 Kb
Image
Boost-I 200 Un - image 3
779 Kb
ØD ØD1 B L L1
199 281 339 601 739
Name Photo Description
Vents KOMu 200 KOMu 200 Backdraught damper with spring-loaded plates for shutting off air flow in round air ducts
Vents KOM 200 KOM 200 Backdraught damper with spring-loaded plates for shutting off air flow in round air ducts
Vents KR 200 KR 200 Air dampers for controlling air flow in round air ducts
Name Photo Description
Vents NKV 200-4 NKV 200-4 Inline water supply air heaters or heater for air handling units with a round cross-section
Vents NKV 200-2 NKV 200-2 Inline water supply air heaters or heater for air handling units with a round cross-section
Name Photo Description
Vents NK 200-3,4-1 NK 200-3,4-1 Round electric inline heaters with round cross-section
Vents NK 200-2,4-1 NK 200-2,4-1 Round electric inline heaters with round cross-section
Vents NK 200-2,0-1 NK 200-2,0-1 Round electric inline heaters with round cross-section
Vents NK 200-1,7-1 NK 200-1,7-1 Round electric inline heaters with round cross-section
Vents NK 200-1,2-1 NK 200-1,2-1 Round electric inline heaters with round cross-section
Name Photo Description
Vents FBK 200-7 FBK 200-7 Round bag air filters
Vents FBK 200-5 FBK 200-5 Round bag air filters
Vents FBK 200-4 FBK 200-4 Round bag air filters
Vents FB 200 FB 200 Round panel air filters
Name Photo Description
Vents SR 200/1200 SR 200/1200 Silencers made of galvanized steel filled with non-combustible sound-absorbing material
Vents SR 200/900 SR 200/900 Silencers made of galvanized steel filled with non-combustible sound-absorbing material
Vents SR 200/600 SR 200/600 Silencers made of galvanized steel filled with non-combustible sound-absorbing material
Name Photo Description
Vents RS-3,0-T RS-3,0-T Applied in ventilation systems for speed switching ON/OFF and speed control of single-phase power-controlled motors
Vents RS-1-400 RS-1-400 Speed controller
Vents RS-1,5-PS RS-1,5-PS Used in ventilation systems for switching on/off and speed control of single-phase fan motors with voltage control
Name Photo Description
Vents P3-1-300 P3-1-300 Switch