Vents Boost-I 200 V

Inline mixed-flow fans in sound- and heat-insulated casing
  • Maximum airflow: 1110 m3/h
  • Sound pressure level LpA at 3 m: 44 dB(A)
  • Sound insulation
  • Motor type: AC
  • Control: Speed switch
  • Impeller type: Mixed-flow
  • Casing material: Galvanized steel
  • Installation in any position
Unit of measurement Boost-I 200 V
Connected air duct size mm 200
Speed - 1 2 3
Phases - 1
Minimum supply voltage V 230
Maximum supply voltage V 230
Power supply frequency Hz 50
Rated power W 82 104 113
Unit current A 0.37 0.46 0.51
Maximum airflow m3/h 692 906 1110
rotation speed at 50hz - 2229 2634 2823
Sound pressure level LpA at 3 m dB(A) 37 42 44
Weight kg 8.2
Transported air temperature (max) °С 55
Transported air temperature (min) °С -25
Ambient air temperature min °С 1
Ambient air temperature max °С 40
Ingress protection rating - IPX4
Ingress protection rating of the drive - IP20
Trademark Vents
Model Boost-I 200 V
Type of drive installed Integrated VSD
Type of heat recovery system None
Nominal flow rate (m3/s) 0
Nominal external pressure (Pa) 0
Maximum external leakage rates (%) 0
Static efficiency (%) 0
Effective electric power input (kW) 0
Sound power level (dB(A)) 0
Declared typology NRVU UVU
Datasheet
"VENTS Boost-I" product description 04-2024
999 Kb
Manual
"VENTS Boost-I (EC)" user's manual 04-2024 (V208-2EN-02)
923 Kb
BIM/CAD models
Boost-I (EC)
2.21 Mb
Image
Boost-I 200 V - image 1
491 Kb
Image
Boost-I 200 V - image 2
779 Kb
Image
Boost-I 200 V - image 3
301 Kb
ØD ØD1 B L L1
199 281 339 601 739
Name Photo Description
Vents SR 200/900 SR 200/900 Silencer is applied for noise absorption produced during the ventilating equipment operation and spread along the ducting systems
Vents SR 200/600 SR 200/600 Silencer is applied for noise absorption produced during the ventilating equipment operation and spread along the ducting systems
Vents SR 200/1200 SR 200/1200 Silencer is applied for noise absorption produced during the ventilating equipment operation and spread along the ducting systems
Name Photo Description
Vents FB 200 FB 200 Panel filters
Vents FBK 200-4 FBK 200-4 Pocket filter
Vents FBK 200-5 FBK 200-5 Pocket filter
Vents FBK 200-7 FBK 200-7 Pocket filter
Name Photo Description
Vents NK 200-1,2-1 NK 200-1,2-1 Duct electric heater
Vents NK 200-1,7-1 NK 200-1,7-1 Duct electric heater
Vents NK 200-2,0-1 NK 200-2,0-1 Duct electric heater
Vents NK 200-2,4-1 NK 200-2,4-1 Duct electric heater
Vents NK 200-3,4-1 NK 200-3,4-1 Duct electric heater
Name Photo Description
Vents NKV 200-2 NKV 200-2 Duct water heaters are designed for heating of supply air in round ventilation systems. They can be also applied in supply or supply and exhaust ventilating units
Vents NKV 200-4 NKV 200-4 Duct water heaters are designed for heating of supply air in round ventilation systems. They can be also applied in supply or supply and exhaust ventilating units
Name Photo Description
Vents KOM 200 KOM 200 Spring-loaded backdraft damper for round ducts
Vents KOMu 200 KOMu 200 Spring-loaded backdraft damper for round ducts
Vents KR 200 KR 200 Air damper for air flow control in round air ducts
Name Photo Description
Vents P3-1-300 P3-1-300 Switch
Name Photo Description
Vents RS-1,5-PS RS-1,5-PS Used in ventilation systems for switching on/off and speed control of single-phase fan motors with voltage control
Vents RS-1-400 RS-1-400 Speed controller
Vents RS-3,0-T RS-3,0-T Applied in ventilation systems for speed switching ON/OFF and speed control of single-phase power-controlled motors