Unit of measurement | CBF LP 110 DC TP | |
Connected air duct size | mm | 100 |
Phases | - | 1 |
Minimum supply voltage | V | 120 |
Maximum supply voltage | V | 240 |
Power supply frequency | Hz | 50/60 |
Rated power | W | 19 |
Unit current | A | 0.18 (0.3) |
Maximum airflow | m3/h | 187 |
Sound pressure level LpA at 3 m | dB(A) | 25 |
Weight | kg | 6.4 |
Ambient air temperature min | °С | 1 |
Ambient air temperature max | °С | 40 |
Ingress protection rating | - | IPX4 |
Trademark | Vents | |||||
Model | CBF LP 110 DC TP | |||||
Specific energy consumption (SEC) (kWh/(m2/a)) | Cold | Average | Warm | |||
-53.9 | A+ | -26.9 | B | -11.4 | E | |
Type of ventilation unit | Unidirectional | |||||
Type of drive installed | Variable speed | |||||
Type of heat recovery system | None | |||||
Maximum flow rate (m3/h) | 90 | |||||
Electric power input (W) | 14 | |||||
Reference flow rate (m3/s) | 0.037 | |||||
Reference pressure difference (Pa) | 50 | |||||
Specific power input (SPI) (W/(m3/h)) | 0.109 | |||||
Control typology | Local demand control | |||||
Maximum external leakage rates (%) | 2.7 | |||||
Sound power level (dB(A)) | 49 | |||||
Declared typology | RVU UVU | |||||
The annual electricity consumption (AEC) (kWh/a) | Cold | Average | Warm | |||
58 | 58 | 58 | ||||
The annual heating saved (AHS) (kWh/a) | Cold | Average | Warm | |||
5536 | 2830 | 1280 |
d | L1 | L2 | A | B | C | E | H | h | G |
---|---|---|---|---|---|---|---|---|---|
98 | 100 | 40.5 | 330 | 278 | 255 | 395 | 134 | 18 | max 620 |
Name | Photo | Description |
---|---|---|
Vents P2-10 | Turning fan on/off and speed switching for multispeed fans |
Name | Photo | Description |
---|---|---|
Vents MVM 102 bVs N | Supply and exhaust metal hoods |
Name | Photo | Description |
---|---|---|
Vents MV 102 V ASA | Supply and exhaust hoods | |
Vents TP CBF | Motion sensor |
Name | Photo | Description |
---|---|---|
Vents Polyvent 660 | Flexible PVC film non-insulated air ducts with steel wire frame (65 μm) |
Name | Photo | Description |
---|---|---|
Vents CB 60-110 | The clamps are designed for quick and reliable mounting and connection of various round ventilation system components. Clamps are the stainless steel quick-release clamps equipped with a stainless steel swing screw |