/ Product catalogue / Centralized air handling units / Counterflow residential AHU / Suspended Units / Enave P / Enave 180 P A21
| Unit of measurement | Enave 180 P A21 | |
| Connected air duct size | mm | 160 |
| Phases | - | 1 |
| Minimum supply voltage | V | 230 |
| Maximum supply voltage | V | 230 |
| Power supply frequency | Hz | 50/60 |
| Rated power | W | 53 |
| Unit current | A | 0.49 |
| Maximum airflow | m3/h | 181 |
| Sound pressure level LpA at 3 m | dB(A) | 29 |
| Heat recovery efficiency, max | % | 91 |
| Heat exchanger type | - | Counter flow |
| Heat exchanger material | - | Polystyrene |
| Weight | kg | 12 |
| Extract filter | - | Coarse > 60 % (G4) |
| Supply filter | - | Coarse > 60 % (G4) (option ePM1 60 % (F7)) |
| Transported air temperature (max) | °С | 45 |
| Ambient air temperature min | °С | 1 |
| Ambient air temperature max | °С | 40 |
| Ambient air humidity max | % | 60 |
| Ingress protection rating | - | IP22 |
| Ingress protection rating of the drive | - | IP44 |
| Trademark | Vents | |||||
| Model | Enave 180 P A21 | |||||
| Specific energy consumption (SEC) (kWh/(m2/a)) | Cold | Average | Warm | |||
| 82.1 | A+ | 43.2 | A+ | 18.2 | E | |
| Type of ventilation unit | Bidirectional | |||||
| Type of drive installed | Variable speed | |||||
| Type of heat recovery system | Recuperative | |||||
| Thermal efficiency of heat recovery (%) | 87 | |||||
| Maximum flow rate (m3/h) | 153 | |||||
| Electric power input (W) | 53 | |||||
| Reference flow rate (m3/s) | 0.03 | |||||
| Reference pressure difference (Pa) | 50 | |||||
| Specific power input (SPI) (W/(m3/h)) | 0.204 | |||||
| Control typology | Local demand control | |||||
| Maximum internal leakage rates (%) | 2.7 | |||||
| Maximum external leakage rates (%) | 2.7 | |||||
| Declared typology | RVU BVU | |||||
| Sound power level (dB(A)) | 49 | |||||
| The annual electricity consumption (AEC) (kWh/a) | Cold | Average | Warm | |||
| 690 | 153 | 108 | ||||
| The annual heating saved (AHS) (kWh/a) | Cold | Average | Warm | |||
| 9060 | 4631 | 2094 | ||||
| H | W | L | D | W1 | L1 |
|---|---|---|---|---|---|
| 272 | 640 | 930 | 160 | 300 | 627 |
| Name | Photo | Description |
|---|---|---|
| Vents SF 205x200x48 Coarse 90% G4 |
|
Panel filter G4 |
| Vents SF 205x200x48 ePM1 60% F7 |
|
F7 panel filter |
| Name | Photo | Description |
|---|---|---|
| Vents A25 |
|
The control panel with a sensor display |
| Vents A22 |
|
The A22/A22 WiFi control panels are used for control of industrial and domestic air handling units with an A21 automation system. |
| Vents A22 WiFi |
|
The A22/A22 WiFi control panels are used for control of industrial and domestic air handling units with an A21 automation system. |
| Name | Photo | Description |
|---|---|---|
| Vents HV2 |
|
Humidity sensor |
| Vents CO2-3 |
|
CO2 sensor |
| Vents CO2-1 |
|
CO2 sensors |
| Vents CO2-2 |
|
CO2 sensors |
| Vents HR-S |
|
Electro-mechanical humidistats |
| Name | Photo | Description |
|---|---|---|
| Vents NKP 160-0,8-1 A21 V.2 |
|
Heater for heat exchanger freeze protection |
| Vents NKP 160-1,2-1 A21 V.2 |
|
Heater for heat exchanger freeze protection |
| Vents NKP 160-1,7-1 A21 V.2 |
|
Heater for heat exchanger freeze protection |
| Vents NKP 160-2,0-1 A21 V.2 |
|
Heater for heat exchanger freeze protection |
| Vents NKD 160-0,8-1 A21 V.2 |
|
Duct heater for supply air post-heating with external control |
| Vents NKD 160-1,2-1 A21 V.2 |
|
Duct heater for supply air post-heating with external control |
| Vents NKD 160-1,7-1 A21 V.2 |
|
Duct heater for supply air post-heating with external control |
| Vents NKD 160-2,0-1 A21 V.2 |
|
Duct heater for supply air post-heating with external control |
| Name | Photo | Description |
|---|---|---|
| Vents SH-32 |
|
The hydraulic U-trap for condensate drainage from heat exchangers and coolers in ventilation and air conditioning systems |
| Name | Photo | Description |
|---|---|---|
| Vents SR 160/600 |
|
Silencer is applied for noise absorption produced during the ventilating equipment operation and spread along the ducting systems |
| Vents SR 160/900 |
|
Silencer is applied for noise absorption produced during the ventilating equipment operation and spread along the ducting systems |
| Vents SR 160/1200 |
|
Silencer is applied for noise absorption produced during the ventilating equipment operation and spread along the ducting systems |
| Name | Photo | Description |
|---|---|---|
| Vents KRV 160 |
|
Air damper for air flow cut-off in round air ducts |
| Name | Photo | Description |
|---|---|---|
| Vents Belimo TF230 |
|
The actuators are designed for controlling air dampers with cross section up to 0.4 m² performing protection functions |
