/ Product catalogue / Centralized air handling units / Counterflow residential AHU / Vertical Units / Enave 550 V / Enave-T 550 VE A21 L
| Unit of measurement | Enave-T 550 VE A21 L | |
| Connected air duct size | mm | 200 |
| Phases | - | 1 |
| Minimum supply voltage | V | 230 |
| Maximum supply voltage | V | 230 |
| Power supply frequency | Hz | 50/60 |
| Rated power | W | 347 |
| Power of electrical preheater | W | 1400 |
| Unit current | A | 8.61 |
| Maximum airflow | m3/h | 660 |
| Sound pressure level LpA at 3 m | dB(A) | 57 |
| Heat recovery efficiency, max | % | 80 |
| Heat exchanger type | - | Counter flow |
| Heat exchanger material | - | Enthalpy |
| Weight | kg | 28 |
| Extract filter | - | Coarse > 60 % |
| Supply filter | - | Coarse > 60 % (option ePM1 60 %) |
| Transported air temperature (max) | °С | 40 |
| Transported air temperature (min) | °С | -25 |
| Ambient air temperature min | °С | 1 |
| Ambient air temperature max | °С | 40 |
| Ambient air humidity max | % | 60 |
| Ingress protection rating | - | IP22 |
| Ingress protection rating of the drive | - | IP44 |
| Ø D | H | H1 | L | L1 | W | W1 |
|---|---|---|---|---|---|---|
| 200 | 885 | 943 | 711 | 250 | 820 | 365 |
| Name | Photo | Description |
|---|---|---|
| Vents SF 596x164x60 Coarse 90% G4 |
|
Panel filter G4 |
| Vents SF 596x164x60 ePM1 F7 |
|
F7 panel filter |
| Name | Photo | Description |
|---|---|---|
| Vents A25 |
|
The control panel with a sensor display |
| Vents A22 |
|
The A22/A22 WiFi control panels are used for control of industrial and domestic air handling units with an A21 automation system. |
| Vents A22 WiFi |
|
The A22/A22 WiFi control panels are used for control of industrial and domestic air handling units with an A21 automation system. |
| Name | Photo | Description |
|---|---|---|
| Vents HV2 |
|
Humidity sensor |
| Vents CO2-3 |
|
CO2 sensor |
| Vents CO2-1 |
|
CO2 sensors |
| Vents CO2-2 |
|
CO2 sensors |
| Vents HR-S |
|
Electro-mechanical humidistats |
| Name | Photo | Description |
|---|---|---|
| Vents NKD 200-1,2-1 A21 V.2 |
|
Duct heater for supply air post-heating with external control |
| Vents NKD 200-1,7-1 A21 V.2 |
|
Duct heater for supply air post-heating with external control |
| Vents NKD 200-2,0-1 A21 V.2 |
|
Duct heater for supply air post-heating with external control |
| Name | Photo | Description |
|---|---|---|
| Vents SR 200/600 |
|
Silencer is applied for noise absorption produced during the ventilating equipment operation and spread along the ducting systems |
| Vents SR 200/900 |
|
Silencer is applied for noise absorption produced during the ventilating equipment operation and spread along the ducting systems |
| Vents SR 200/1200 |
|
Silencer is applied for noise absorption produced during the ventilating equipment operation and spread along the ducting systems |
| Name | Photo | Description |
|---|---|---|
| Vents KRV 200 |
|
Air damper for air flow cut-off in round air ducts |
| Name | Photo | Description |
|---|---|---|
| Vents Belimo TF230 |
|
The actuators are designed for controlling air dampers with cross section up to 0.4 m² performing protection functions |
