Privacy Policy (GDPR)
Not registered yet? Take advantages of registration:
Products saving in a binding to the projects
Product consultation from our experts - Online
By using this form, you confirm that you have read the site terms of use Terms of use and completely accept the terms of use


Centrifugal inline fan with capacity up to 280 m³/h in insulated casing.

  • Description
  • Characteristics
  • Downloads
  • Dimensions
  • Additional characteristics
  • Designation key
  • Video
  • The design of the KSB fans allows to use them in supply and exhaust ventilation systems in premises with high requirements to the noise level, efficiency and fan control and with limited space for mounting.

  • For example, the unit design includes a possibility of space-restricted installation above suspended ceilings. 

  • The KSB EC fans are designed for mounting into Ø 100, 125, 150, 160, 200, 250, 315 mm air ducts.

  • The fan casing is made of galvanized sheet steel using heat- and sound-insulation material.

  • The round connecting spigots are rubber sealed.

  • The unit is equipped with high-efficient external rotor EC motors and centrifugal impellers with backward curved blades.

  • These motors currently are the most cutting-edge solution in the field of energy conservation.

  • The use of EC motors allows to reduce the electricity consumption by 35% approximately while providing the high capacity and low noise level.

  • The EC motors are featured with high performance and totally controllable speed range.

  • The high efficiency (up to 90%) is a definite advantage of the EC motors.

  • The motors are equipped with rolling-element bearings that provide a longer operation period (40000 hours).

  • The fans are controlled by means of a 0-10 V external control signal while the performance regulation is based on the feedback from the temperature, smoke and other sensors as well as other vital parameter settings.

  • As the control signal changes the EC fan changes speed accordingly to supply the exact air amount required by the ventilation system.

  • The maximum fan speed does not depend on the electric mains frequency enabling compatibility with both 50 Hz and 60 Hz networks.

  • The fans can be easily combined into a single computer-controlled network.

  • Special software allows for precise control over the operating parameters of the network units.

  • The fans are intended for installation in round air ducts. They are installed between the air ducts. 

  • The use of flexible connectors requires fixation of the fan on the building structure by means of supports, mounts or fixing brackets.

  • The fan can be fixed in any position, taking into account the air flow direction indicated by the arrow on the fan casing.

  • While mounting the fan provide enough access for servicing and repair operations.

  • Electrical connection and installation must be performed in accordance with the instruction manual and the electrical connections diagram applied to the terminal box.

Parameter KSB 100 EC
Measurement unit
Duct diameter 100 mm
Sound- and heat-insulated casing yes -
Design centrifugal -
Current 0.75 A
Phase 1 ˜
Voltage 230 V
Frequency 50/60 Hz
Sound pressure level at 3 m distance 32 dBА
Air capacity 278 m³/h
Power consumption 92.7 W
EC motor yes -
RPM 3200 min-1
Max. transported air temperature -25 +60 °С
Protection rating IP X4 -
Casing material galvanized steel -
SEC Class C -
Duct for round air ducts -
Mounting Inline -
Files archieve
Download high quality image "VENTS KSB EC (ErP 2018)" (psd 2.3Mb)
Download image "VENTS KSB EC (ErP 2018)" for your website (png 372.55Kb)
Brochure "VENTS KSB EC" (pdf 1.63Mb)
Parameter Value Measurement unit
∅D 99 mm
B 355 mm
B1 447 mm
B2 380 mm
H 200 mm
L 325 mm
L1 375 mm
L2 280 mm
Additional characteristics
Additional characteristics
Sound power level [dBA], A - weighted Octave frequency band [Hz] LpA, 3 m [dBA] LpA, 1 m [dBA]
Hz                Заг. 63 125 250 500 1000 2000 4000 8000
LwA to inlet dBA 61 47 55 59 51 47 41 41 32 41   51
LwA to outlet dBA 64 52 59 60 57 47 41 42 36 44  54 
LwA to environment dBA 53 42 49 49 41 36 31 27 23 32 42
Designation key
Designation key
Series Air duct diameter Motor Options
VENTS KSB 100; 125; 150; 160; 200; 250; 315 ЕС: synchronous electronically commutated motor P: built-in smooth speed controller

Share your opinion
I found this page useful to select the required products easy and quick
No difficulties with the site use. Everything is logical ad clear
The site produced a nice impression

Please evaluate our updated site user friendliness