Login

Privacy Policy (GDPR)
Authorization
Not registered yet? Take advantages of registration:
Products saving in a binding to the projects
Product consultation from our experts - Online
Registration
Signup
By using this form, you confirm that you have read the site terms of use Terms of use and completely accept the terms of use

VENTS KSB 160 K2 EC


Centrifugal duct fan in a heat- and sound-insulated casing with air flow up to 454 m³/h.

  • Description
  • Characteristics
  • Capacity diagram
  • Downloads
  • Dimensions
  • Additional characteristics
  • Designation key
Description
Description
APPLICATION  
  • The KSB K2 EC fans are designed for supply and exhaust ventilation of premises with high requirements to the noise level and with limited space for mounting.
  • For example, the unit design includes a possibility of space-restricted installation above suspended ceilings.
  • Compatible with Ø 100-500 mm air ducts.
DESIGN  
  • The fan casing is made of aluzinc.
  • For easy installation and operation, the cover of the fan is secured with a special lock.
  • The casing is heat- and sound-insulated with a 50 mm layer of non-flammable mineral wool.
  • To ensure better noise absorption, the inner surface of the insulation is made of a perforated metal sheet.
  • The round connecting spigots are rubber sealed.
MOTOR  
  • The units feature efficient electronically commutated (EC) direct current motors with an external rotor and centrifugal impellers with forward curved blades.
  • EC motor is free of friction and wear parts such as a commutator and brushes.
  • These components are replaced by a maintenance-free electronic circuit board.
  • EC motors are characterised with high performance and optimum control across the entire speed range.
  • In addition to that, the efficiency of the electronically commutated motor reaches very impressive levels of up to 90 %.
INTEGRATED FUNCTIONS AND CONTROL  
  • The fan is controlled with an external control signal 0-10 V (capacity control is performed depending on temperature, pressure, smoke level etc.).
  • The fan has low energy consumption at any speed.
  • Maximum fan speed does not depend on the available current frequency and is suitable for operation both at 50 and 60 Hz.
  • The fans can be connected to centralized computer ventilation control systems.
INSTALLATION  
  • Duct fans are intended for mounting to round air ducts.
  • The fans are installed between the air ducts.
  • In case the fan is mounted on flexible joints, attach the fan to a structural unit by means of supports, suspension links or brackets.
  • The fan may be installed in any position in consideration of the air flow direction (as indicated by the arrow on the fan casing).
  • While mounting the fan provide enough access for servicing and repair operations.
Characteristics
Characteristics
Parameter KSB 160 K2 EC
Measurement unit
Frequency 50/60 Hz
Duct diameter 160 mm
Phase 1 ˜
Design centrifugal -
Voltage 200-277 V
Power 85 W
Current 0.76 A
Sound pressure level at 3 m distance 40 dBА
Air capacity 454 m³/h
EC motor yes -
RPM 3600 min-1
Protection rating IP X4 -
Transported air temperature -25 ... +55 °С
Casing material aluzinc -
Mass 12 kg
SEC Class B -
Outdoor mounting no -
Sound-insulated casing yes -
Duct for round air ducts -
Type supply and exhaust -
Mounting Inline -
Capacity diagram
Capacity diagram
  • Selection method:
  • Air flow:
  • Pressure:
Operating point
  • Air flow: --
  • Pressure: ---
Files archieve
Downloads
Name
Brochure "VENTS KSB K2 EC" (pdf 2.19Mb)
Download high quality image "VENTS KSB K2 EC (ErP 2018)" (psd 3.62Mb)
Download image "VENTS KSB K2 EC (ErP 2018)" for your website (png 209.74Kb)
Dimensions
Characteristics
VENTS KSB 160 K2 EC
Parameter Value Measurement unit
∅D 159 mm
B 420 mm
B1 228 mm
B2 517 mm
H 270 mm
L1 507 mm
L2 414 mm
Additional characteristics
Additional characteristics
Sound power level [A-filter] Sound pressure level at a distance of 3 m [A-filter] Sound pressure level at a distance of 1 m [A-filter]
Sound power level Gen. Octave frequency band [Hz]
  Hz 63 125 250 500 1000 2000 4000 8000 LpA, 3 m dBA LpA, 1 m dBA
LwA to inlet dBA 76 62 71 70 68 66 64 62 56 55 65
LwA to outlet dBA 80 60 71 74 73 72 72 68 60 59 69
LwA to environment dBA 59 32 45 53 52 53 52 45 35 38 48
Designation key
Designation key
Series Duct diameter Modification Motor Options
VENTS KSB 100, 125, 150, 160, 200, 250, 315, 355, 400, 450, 500 К2: heat- and sound-insulated casing ЕС: synchronous electronically commutated motor R: power cord with the IEC C14 connector
Share your opinion
I found this page useful to select the required products easy and quick
No difficulties with the site use. Everything is logical ad clear
The site produced a nice impression

Questionnaire
Basic parameter for domestic fan selection