Login

Privacy Policy (GDPR)
Authorization
Not registered yet? Take advantages of registration:
Products saving in a binding to the projects
Product consultation from our experts - Online
Registration
Signup
By using this form, you confirm that you have read the site terms of use Terms of use and completely accept the terms of use

KSB 500 K2 EC


Centrifugal duct fan in a heat- and sound-insulated casing with air flow up to 7145 m³/h.

  • Description
  • Characteristics
  • Capacity diagram
  • Downloads
  • Dimensions
  • Additional characteristics
  • Designation key
Description
Description
APPLICATION  
  • The KSB K2 EC fans are designed for supply and exhaust ventilation of premises with high requirements to noise level and with limited space for mounting.
  • For example, the unit design includes a possibility of space-restricted installation above suspended ceilings.
  • Compatible with Ø 100-500 mm air ducts.
MOTOR DESIGN
  • The units feature efficient electronically commutated (EC) direct current motors with external rotor and centrifugal impellers with backward curved blades.
  • EC motor is free of friction and wear parts such as a commutator and brushes.
  • These components are replaced by a maintenance-free electronic circuit board.
  • EC motors are characterised with high performance and optimum control across the entire speed range.
  • In addition to that, the efficiency of the electronically commutated motor reaches very impressive levels of up to 90 %.

  • The fan casing is made of aluzinc.
  • For easy installation and operation, the top cover of the fan is secured with a special lock.
  • The casing is heat- and sound-insulated with a 50 mm layer of non-flammable mineral wool.
  • To ensure better noise absorption, the inner surface of the insulation is made of a perforated metal sheet.
  • The round connecting spigots are rubber sealed.

BUILT-IN FUNCTIONS AND CONTROL  
  • The fan is controlled with the external control signal 0-10 V (capacity control is performed depending on temperature, pressure, smoke level etc.).
  • The fan has low energy consumption at any speed.
  • Maximum fan speed does not depend on the available current frequency and is suitable for operation both at 50 and 60 Hz.
  • Several fans can be integrated into a single computer-driven control system.
  • Custom designed software provides high accuracy control of the fans integrated into a network.
  • The computer display shows all the system parameters and the operation mode can be set individually for each fan in the network.
INSTALLATION  
  • Duct fans are intended for mounting to round air ducts.
  • The fans are installed between the air ducts.
  • In case the fan is mounted on flexible joints, attach the fan to a structural unit by means of supports, suspension links or brackets.
  • The fan may be installed in any position in consideration of the air flow direction (as indicated by the arrow on the fan casing).
  • While mounting the fan provide enough access for servicing and repair operations.
Characteristics
Characteristics
Parameter KSB 500 K2 EC
Measurement unit
Frequency 50/60 Hz
Duct diameter 500 mm
Phase 1 ˜
Design centrifugal -
Voltage 200-277 V
Power 752 W
Current 3.42 A
Sound pressure level at 3 m distance 56 dBА
Maximum air capacity 7145 m³/h
EC motor yes -
Protection rating IP X4 -
Casing material aluzinc -
Mass 86 kg
SEC Class - -
Outdoor mounting no -
Sound-insulated casing yes -
Form-ducts for round air ducts -
Type supply and exhaust -
Mounting Inline -
Capacity diagram
Capacity diagram
  • Selection method:
  • Air flow:
  • Pressure:
Operating point
  • Air flow: --
  • Pressure: ---
Files archieve
Downloads
Name
Brochure "VENTS KSB K2 EC" (pdf 2.19Mb)
Download high quality image "VENTS KSB K2 EC (ErP 2018)" (psd 3.62Mb)
Download image "VENTS KSB K2 EC (ErP 2018)" for your website (png 209.74Kb)
Dimensions
Characteristics
KSB 500 K2 EC
Parameter Value Measurement unit
∅D 499 mm
B 1049 mm
B1 800 mm
B2 1146 mm
H 660 mm
L1 1079 mm
L2 998 mm
Additional characteristics
Additional characteristics
Sound power level [A-filter] Sound pressure level at a distance of 3 m [A-filter] Sound pressure level at a distance of 1 m [A-filter]
Sound power level Gen. Octave frequency band [Hz]
  Hz 63 125 250 500 1000 2000 4000 8000 LpA, 3 m dBA LpA, 1 m dBA
LwA to inlet dBA 88 69 81 86 74 68 59 59 46 67 77
LwA to outlet dBA 94 78 89 91 86 70 61 63 53 73 83
LwA to environment dBA 77 62 73 74 60 57 47 45 40 56 66
Designation key
Designation key
Series Duct diameter Modification Motor Options
VENTS KSB 100, 125, 150, 160, 200, 250, 315, 355, 400, 450, 500 К2: heat- and sound-insulated casing ЕС: synchronous electronically commutated motor R: power cord with the IEC C14 connector
Share your opinion
I found this page useful to select the required products easy and quick
No difficulties with the site use. Everything is logical ad clear
The site produced a nice impression

Questionnaire
Is our site helpful for your business development?