Vents Quiet-Hex 100

Vents Quiet-Hex 100 - Intellectual axial low-noise and energysaving fan for exhaust ventilation
New
Intellectual axial low-noise and energysaving fan for exhaust ventilation
  • Sound pressure level LpA at 3 m: 25 dB(A)
  • Impeller type: Axial
  • Casing material: Plastic
  • Backdraft protection: Backdraft damper
  • Ball bearing
Unit of measurement Quiet-Hex 100
Connected air duct size mm 100
Maximum supply voltage V 240
Minimum supply voltage V 220
Power supply frequency Hz 50
Rated power W 7.5
Unit current A 0.049
Maximum airflow m³/h 97
Sound pressure level LpA at 3 m dB(A) 25
Weight kg 0.58
Ambient air temperature min °С 1
Ambient air temperature max °С 40
Ingress protection rating - IP45
Impeller material - Plastic
Trademark Vents
Model Quiet-Hex 100
Specific energy consumption (SEC) (kWh/(m²/a)) Cold Average Warm
-31.1 B -14.7 E -5.3 F
Type of ventilation unit Unidirectional
Type of drive installed Single speed
Type of heat recovery system None
Maximum flow rate (m³/h) 97
Electric power input (W) 7.5
Reference flow rate (m³/s) 0.019
Specific power input (SPI) (W/(m³/h)) 0.077
Control typology Manual control
Maximum external leakage rates (%) 2.7
Declared typology RVU UVU
Sound power level (dB(A)) 45
The annual electricity consumption (AEC) (kWh/a) Cold Average Warm
97 97 97
The annual heating saved (AHS) (kWh/a) Cold Average Warm
3355 1715 776
Datasheet
"VENTS Quiet-Hex" product description 10-2025
3.11 Mb
Manual
"VENTS Quiet-Hex" user's manual 01-2025 (V307EN-01)
2.87 Mb
Image
Quiet-Hex 100 - image 1
497 Kb
ØD B L L1
100 158 107 26
Name Photo Description
Vents MV 100 V MV 100 V Two-piece plastic grilles with angled louvers
Name Photo Description
Vents PVT 050/10 PVT 050/10 The adhesive PVC tape is an insulation tape made of plasticized PVC base covered with a glue layer
Vents PVT 050/30 PVT 050/30 The adhesive PVC tape is an insulation tape made of plasticized PVC base covered with a glue layer
Vents PVT 050/50 PVT 050/50 The adhesive PVC tape is an insulation tape made of plasticized PVC base covered with a glue layer
Vents C 100 C 100 The clamps are designed for quick and reliable mounting and connection of various round ventilation system components. Clamps are made of stainless steel band
Name Photo Description
Vents 1805 1805 Wall mounting
Name Photo Description
Vents Polyvent N Polyvent N Flexible uninsulated air duct made of metallized film
Name Photo Description
Vents KO 100 KO 100 Back valve is designed for domestic fan
Vents KO1 100 KO1 100 Back valve is designed for domestic fan
Name Photo Description
Vents PO 400 PO 400 Window ventilators for supply ventilation
Name Photo Description
Vents MV 102 VK MV 102 VK Supply and exhaust hoods
Name Photo Description
Vents MVM 102 V N MVM 102 V N Exhaust metal hoods