Vents Solo RA1-50-9 R V.2

Series: Solo RA1-35 R V.2

The Solo ventilator is the most suitable solution for utility rooms, closets, and cloakrooms. Low power consumption will save electricity by providing clean and fresh air to any room with area of up to 25 m2. The area is approximate and depends on the ventilation standards in your country and the model of the ventilator

Air flow in heat recovery mode: 25 m³/h
Sound pressure level LpA at 3 m: 29 dB(A)
Sound pressure level LpA at 1 m: 38 dB(A)
Heat recovery efficiency: 85 %
Filter: G3
Motor type: EC
Control: Remote Control
Casing material: Plastic
Humidity sensor

	Unit of measurement	Solo RA1-50-9 R V.2
Minimum supply voltage	V	220
Maximum supply voltage	V	240
Power supply frequency	Hz	50/60
Rated power	W	0.70	2.30
Unit current	A	0.020	0.034
Air flow in ventilation mode	m³/h	25	50
Air flow in heat recovery mode	m³/h	12	25
Sound pressure level LpA at 3 m	dB(A)	16	29
Sound pressure level LpA at 1 m	dB(A)	26	38
Heat recovery efficiency	%	85
Heat recovery efficiency, max	%	85
Filter	-	G3
Transported air temperature (max)	°С	40
Transported air temperature (min)	°С	-15
Ambient air temperature min	°С	1
Ambient air temperature max	°С	40
Ambient air humidity max	%	65
Ingress protection rating	-	IP24

Create PDF

Trademark	Vents
Model	Solo RA1-50-9 R V.2
Specific energy consumption (SEC) (kWh/(m²/a))	Cold		Average		Warm
	-83.7	A+	-42.5	A+	-18.9	E
Type of ventilation unit	Bidirectional
Type of drive installed	2-speed
Type of heat recovery system	Regenerative
Thermal efficiency of heat recovery (%)	74
Maximum flow rate (m³/h)	50
Electric power input (W)	2.3
Reference flow rate (m³/s)	0.007
Specific power input (SPI) (W/(m³/h))	0.028
Control typology	Local demand control
Airflow sensitivity at +20 Pa and -20 Pa (%)	0
Declared typology	RVU BVU
Sound power level (dB(A))	36
The annual electricity consumption (AEC) (kWh/a)	Cold		Average		Warm
	23		23		23
The annual heating saved (AHS) (kWh/a)	Cold		Average		Warm
	84		43		19