Vents Stream 100/125 EC S (100 spigot)

Sound- and heat-insulated mixed flow duct fans with EC motor
  • Maximum airflow: 295 m3/h
  • Sound pressure level LpA at 3 m: 31 dB(A)
  • Sound insulation
  • Motor type: EC
  • Impeller type: Mixed
  • Casing material: Plastic
  • Installation in any position
Unit of measurement Stream 100/125 EC S (100 spigot)
Connected air duct size mm 100
Phases - 1
Minimum supply voltage V 230
Maximum supply voltage V 230
Power supply frequency Hz 50/60
Rated power W 39
Unit current A 0.36
Maximum airflow m3/h 295
rotation speed at 50hz - 3168
Sound pressure level LpA at 3 m dB(A) 31
Weight kg 5
Transported air temperature (max) °С 55
Transported air temperature (min) °С -25
Ingress protection rating - IPX4
Ingress protection rating of the drive - IP44
Vents Stream 100/125 EC S (100 spigot) 54 320 2018
Trademark Vents
Model Stream 100/125 EC S (100 spigot)
Specific energy consumption (SEC) (kWh/(m2/a)) Cold Average Warm
54.3 A+ 27.3 B 11.8 E
Type of ventilation unit Unidirectional
Type of drive installed Variable speed
Type of heat recovery system None
Maximum flow rate (m3/h) 320
Electric power input (W) 39
Reference flow rate (m3/s) 0.054
Reference pressure difference (Pa) 50
Specific power input (SPI) (W/(m3/h)) 0.077
Control typology Local demand control
Maximum external leakage rates (%) 2.7
Declared typology RVU UVU
Sound power level (dB(A)) 54
The annual electricity consumption (AEC) (kWh/a) Cold Average Warm
41 41 41
The annual heating saved (AHS) (kWh/a) Cold Average Warm
5536 2830 1280
Datasheet
"VENTS Stream EC" product description 05-2023
985 Kb
Manual
"VENTS Stream (EC)" user's manual 11-2023 (V238EN-04)
3.35 Mb
BIM/CAD models
Stream EC
815 Kb
Image
Stream 100/125 EC S (100 spigot) - image 1
268 Kb
Vents Stream 100/125 EC S (100 spigot) - Dimensions
Vents Stream 100/125 EC S (100 spigot) - Dimensions
Name Photo Description
Vents NKV 100-2 NKV 100-2 Duct water heaters are designed for heating of supply air in round ventilation systems. They can be also applied in supply or supply and exhaust ventilating units
Vents NKV 100-4 NKV 100-4 Duct water heaters are designed for heating of supply air in round ventilation systems. They can be also applied in supply or supply and exhaust ventilating units
Name Photo Description
Vents NK 100-1,8-1 NK 100-1,8-1 Duct electric heater
Vents NK 100-1,6-1 NK 100-1,6-1 Duct electric heater
Vents NK 100-1,2-1 NK 100-1,2-1 Duct electric heater
Vents NK 100-0,8-1 NK 100-0,8-1 Duct electric heater
Vents NK 100-0,6-1 NK 100-0,6-1 Duct electric heater
Vents NK 100-0,6-1 U NK 100-0,6-1 U Duct electric heater with temperature controller or control unit
Vents NK 100-0,8-1 U NK 100-0,8-1 U Duct electric heater with temperature controller or control unit
Vents NK 100-1,2-1 U NK 100-1,2-1 U Duct electric heater with temperature controller or control unit
Vents NK 100-1,6-1 U NK 100-1,6-1 U Duct electric heater with temperature controller or control unit
Vents NK 100-1,8-1 U NK 100-1,8-1 U Duct electric heater with temperature controller or control unit
Name Photo Description
Vents FBK 100-7 FBK 100-7 Pocket filter
Vents FBK 100-5 FBK 100-5 Pocket filter
Vents FBK 100-4 FBK 100-4 Pocket filter
Vents FB 100 FB 100 Panel filters
Name Photo Description
Vents R-1/010 R-1/010 Speed controller for EC motors
Name Photo Description
Vents KR 100 KR 100 Air damper for air flow control in round air ducts
Vents KOM 100 KOM 100 Spring-loaded backdraft damper for round ducts
Vents KOMu 100 KOMu 100 Spring-loaded backdraft damper for round ducts
Name Photo Description
Vents SR 100/1200 SR 100/1200 Silencer is applied for noise absorption produced during the ventilating equipment operation and spread along the ducting systems
Vents SR 100/900 SR 100/900 Silencer is applied for noise absorption produced during the ventilating equipment operation and spread along the ducting systems
Vents SR 100/600 SR 100/600 Silencer is applied for noise absorption produced during the ventilating equipment operation and spread along the ducting systems