VENTS 100 Simple

Print version Save in PDF format

Axial fan for exhaust ventilation. Maximum capacity - 85 m³/h.

Add to project

Add to compare

Description
Characteristics
Capacity diagram
Downloads
Certificates
Modifications
Dimensions
Legend

Description

APPLICATION
Continuous or periodic exhaust ventilation of bathrooms, showers, kitchens and other utility spaces. Ventilation shaft mounting or duct connection.	Low to medium air flow motion for short distances at low air resistance. Compatible with Ø 100 mm air ducts.
DESIGN
Modern design and aesthetic look. The casing and the impeller are made of high-quality durable ABS plastic, UV resistant. The impeller design enhances the fan efficiency and prolongs the motor service life.	Insect screen Protection rating IP34
MOTOR
Designed for continuous operation and requires no maintenance.	Equipped with overheating protection.
CONTROL
Manual: The fan is controlled by a room light switch. It is not included in the delivery set. The fan is controlled with a built-in pull cord switch "V".This option is not applicable for ceiling mounting. Speed control with a thyristor speed controller, refer to the Electric accessories. Several fans may be connected to one controller. Speed controllers cannot be connected to the T and TH fan modifications.	Automatic: Speed control with a an electronic control unit BU-1-60, refer to the Electric accessories. The control unit is available upon separate order. Fan control with a turn-off delay timer "T" that enables fan running from 2 to 30 minutes after turning the fan off. Fan control with a humidity sensor and turnoff delay timer "TH" that enables fan switching on and running until the indoor humidity drops below the set point adjustable from 60 % to 90 % and subsequent fan running within the set time before turning off.
MOUNTING FEATURES
The fan is mounted directly into the ventilation shaft. Flexible duct connection is recommended in case of the remote ventilation shaft location. The air duct is connected to the fan exhaust flange through a clamp.	Fixing to wall with screws. Suitable for ceiling mounting.
MOUNTING EXAMPLE

Characteristics

Parameter	VENTS 100 Simple	VENTS 100 Simple V	VENTS 100 Simple T	VENTS 100 Simple TH	Measurement unit
Design	axial	axial	axial	axial	-
Voltage	220-240	220-240	220-240	220-240	V
Frequency	50/60	50/60	50/60	50/60	Hz
Power consumption	14	14	14	14	W
Air capacity	85	85	85	85	m³/h
Current	0.09	0.09	0.09	0.09	A
RPM	2400	2400	2400	2400	min^-1
Sound pressure level at 3 m	34	34	34	34	dBА
Weight	0.58	0.58	0.58	0.58	kg
Spigot size	100	100	100	100	mm
Type	exhaust	exhaust	exhaust	exhaust	-
Mounting	wall mounting, ceiling mounting	wall mounting, ceiling mounting	wall mounting, ceiling mounting	wall mounting, ceiling mounting	-

Capacity diagram

Selection method:
Air flow:
Pressure:

Operating point

Air flow: --
Pressure: ---

Files archieve

Downloads

Name

Download

Show

Broschure "VENTS Simple" (pdf 2.67Mb)

User's manual "VENTS Simple" (pdf 1.53Mb)

Download high quality image "VENTS Simple" (psd 2.43Mb)

Download image "VENTS Simple" for your website (png 637.76Kb)

Certificates

<p>
Mark of conformity to the European Quality Standards and Electrical Safety issued by Association for Technical Inspection (Technischer Überwachungsverein, Germany).</p>

Mark of conformity to the European Quality Standards and Electrical Safety issued by Association for Technical Inspection (Technischer Überwachungsverein, Germany).

Mark of conformity to the Ukrainian Quality Standards and electrical safety issued by UkrTEST.

Insulation class: double insulation.

Equipment protection rating.

CE mark means that the equipment is produced in compliance with the quality and safety standards provided by EU regulations for the given product type (marked by manufacturer).

<p>The EurAsian Conformity mark is a certification mark to indicate that the products conform to all technical regulations of the Eurasian Customs Union.</p>

The EurAsian Conformity mark is a certification mark to indicate that the products conform to all technical regulations of the Eurasian Customs Union.

Modifications

Modification name
VENTS 100 Simple
VENTS 100 Simple V
VENTS 100 Simple T
VENTS 100 Simple TH

Modification name	Humidity sensor	Timer	Pull-cord switch
VENTS 100 Simple	-	-	-
VENTS 100 Simple V	-	-
VENTS 100 Simple T	-		-
VENTS 100 Simple TH			-


+
+
+
+

Dimensions

Characteristics

Parameter	Value	Measurement unit
∅D	99.5	mm
B	150	mm
L	83	mm
L1	15	mm

Legend

PICTURE SYMBOL	DESIGNATION	MODIFICATION DESCRIPTION
	Simple V	Equipped with a pull cord switch.
	Simple T	Equipped with a turn-off delay timer adjustable from 2 up to 30 minutes.
	Simple TH	Equipped with a turn-off delay timer adjustable from 2 to 30 minutes and a humidity sensor adjustable from 60 % to 90 %.