Login

Privacy Policy (GDPR)
Authorization
Not registered yet? Take advantages of registration:
Products saving in a binding to the projects
Product consultation from our experts - Online
Registration
Signup
By using this form, you confirm that you have read the site terms of use Terms of use and completely accept the terms of use

VENTS 150 MF

  • Description
  • Characteristics
  • Capacity diagram
  • Downloads
  • Modifications
  • Dimensions
  • Designation key
Description
Description
APPLICATIONS  
  • Continuous or periodic exhaust ventilation of bathroom, showers, kitchens and other utility spaces.
  • Ventilation of premises with high noise level limitations.
  • Mounting into ventilation shafts or connection to Ø100, 125 and 150 mm air ducts.   
DESIGN  
  • The casing and the impeller are made of highquality durable ABS plastic, UV resistant.
  • Specially designed impeller aerodynamic profile provides high air capacity and low noise.
  • The fan is equipped with a back valve to prevent back flow and heat losses during the fan standby.
  • The fan exhaust spigot incorporates specially designed air rectifiers to reduce air turbulence, increase air pressure and lower noise level.
MOTOR  
  • Low energy demand from 8 W due to new high-efficient motor.
  • Protection rating IP 44.
  • Designed for continuous operation and requires no maintenance.
  • Motor equipped with overheating protection.
CONTROL  

Manual control:

  • Manual control with a room light switch. The switch is not included into delivery set.
  • The fan is controlled by the built-in pull cord switch V. Not applied in case of ceiling mounting.
  • Speed control is possible through a thyristor\speed controller (see Electrical Accessories). Several fans may connected to the same controller. Speed controllers can not be connected to the fans with T, TH, TP, VT, VTH modification.

Automatic:

  • By the electronic control unit BU-1-60. The control unit is supplied separately.
  • By the timer T (the built-in run-out timer enables the fan operation within 2 to 30 minutes after the fan switching off).
  • By the humidity sensor and timer TH (if the humidity level in the room exceeds the sensor threshold adjustable value within 60-90% the fan switches automatically on and operates until the humidity level drops to the standard level, after that the fan continues operating within the time period according to the timer setting, then shuts down).
MOUNTING FEATURES  
  • The fan is mounted directly into the ventilation shaft.
  • Flexible duct application is recommended in case of remote location of the ventilation shaft.
  • The air duct is connected to the fan exhaust flange through a clamp.
  • Fixed to wall by self-tapping screws.
  • Suitable for ceiling mounting.
MOUNTING EXAMPLE  
Characteristics
Characteristics
Parameter VENTS 150 MF
VENTS 150 MF L
VENTS 150 MF T
VENTS 150 MF T1
VENTS 150 MF TH
VENTS 150 MF V
VENTS 150 MF VT
VENTS 150 MF VTH
Measurement unit
Duct diameter 150 150 150 150 150 150 150 150 mm
Design axial axial axial axial axial axial axial axial -
Current 0.21 0.21 0.21 0.21 0.21 0.21 0.21 0.21 A
Voltage 220-240 220-240 220-240 220-240 220-240 220-240 220-240 220-240 V
Frequency 230 230 230 230 230 230 230 230 Hz
Power consumption 28 28 28 28 28 28 28 28 W
Air capacity 255 255 255 255 255 255 255 255 m³/h
RPM 1545 1545 1545 1545 1545 1545 1545 1545 min-1
Sound pressure level at 3 m 35 35 35 35 35 35 35 35 dBА
Weight 0.97 0.97 0.97 0.97 0.97 0.97 0.97 0.97 kg
Protection rating IP 44 IP 44 IP 44 IP 44 IP 44 IP 44 IP 44 IP 44 -
Mounting wall mounting, ceiling mounting wall mounting, ceiling mounting wall mounting, ceiling mounting wall mounting, ceiling mounting wall mounting, ceiling mounting wall mounting, ceiling mounting wall mounting, ceiling mounting wall mounting, ceiling mounting -
Capacity diagram
Capacity diagram
  • Selection method:
  • Air flow:
  • Pressure:
Operating point
  • Air flow: --
  • Pressure: ---
Files archieve
Downloads
Name
Brochure "VENTS MF" (pdf 3.23Mb)
Download image "VENTS MF" for your website (png 431.42Kb)
Download high quality image "VENTS MF" (psd 2.11Mb)
User’s manual "VENTS MF" (pdf 1.82Mb)
Modifications
Modification name Humidity sensor Timer Pull-cord switch Ball bearing motor No extra functions
VENTS 150 MF - - - -
VENTS 150 MF L - - - -
VENTS 150 MF T - - - -
VENTS 150 MF T1 - - - -
VENTS 150 MF TH - - -
VENTS 150 MF V - - - -
VENTS 150 MF VT - - -
VENTS 150 MF VTH - -
+
+
+
+
+
+
+
+
Dimensions
Characteristics
VENTS 150 MF
Parameter Value Measurement unit
∅D 148 mm
B 205 mm
L 112 mm
L1 23 mm
Designation key
Designation key
PICTURE SYMBOL DESIGNATION MODIFICATION DESCRIPTION
MF L The motor is equipped with bal bearings for long service life (appr. 40 thousand hours) and fan mounting at any angle. The bearings are maintenance-free and contain enough grease for the entire operating period.
MF T Off-delay timer modification with operating time from 2 to 30 min.
MF T1 Modification with turn-on delay timer (adjustable from 0 to 2 minutes) and off-delay timer (adjustable from 2 to 30 minutes).
MF TH  Off-delay timer modification with the operating time from 2 to 30 min and humidity sensor with threshold from 60 to 90%.
MF V pull-cord switch modification.
MF VT Modification with pull-cord switch and off-delay timer with operating time from 2 to 30 min.
MF VTH Modification with pullcord switch, offdelay timer with operating time from 2 to 30 min and humidity sensor with threshold from 60 to 90%.
Share your opinion
I found this page useful to select the required products easy and quick
No difficulties with the site use. Everything is logical ad clear
The site produced a nice impression

Questionnaire
How often do you use equipment selection program?