Privacy Policy (GDPR)
Not registered yet? Take advantages of registration:
Products saving in a binding to the projects
Product consultation from our experts - Online
By using this form, you confirm that you have read the site terms of use Terms of use and completely accept the terms of use

VENTS 150 S (127-220 V/60 Hz)

  • Description
  • Characteristics
  • Capacity diagram
  • Downloads
  • Dimensions
  • Designation key
  • Example of installation
  • Continuous or periodic exhaust ventilation of bathroom, showers, kitchens and other utility spaces.
  • Ventilation shaft mounting or duct connection.
  • Low to medium air flow motion for short distances at low air resistance.
  • Compatible with Ø 100, 120, 125 and 150 mm air ducts.
  • Modern design and aesthetic look.
  • The casing and the impeller are made of high-quality durable ABS plastic, UV resistant.
  • The intellectual impeller design makes the fan efficiency high and the service life long.
  • Ultra thin front panel.
  • Insect screen.
  • Protection rating IP34.

  • Reliable and low-watt electric motor.
  • Designed for continuous operation and requires no maintenance.
  • Equipped with overheating protection.


  • The fan is controlled by a room light switch. It is not included in the delivery package.
  • The fan is controlled by the built-in pull cord switch V. Not applied in case of ceiling mounting.
  • Speed control is possible through a thyristor speed controller (see Electrical Accessories). Several fans may connected to the same controller. Speed controllers can not be connected to the fans with T, TH, TP, VT, VTH modification.


  • By the electronic control unit BU-1-60. The control unit is supplied separately.
  • By the timer Т (the built-in turn-off delay timer enables the fan operation within 2 to 30 minutes after the fan switching off).
  • By the humidity sensor and timer ТН (if the humidity level in the room exceeds the sensor threshold adjustable value within 60-90 % the fan switches automatically on and operates until the humidity level drops to the standard level, after that the fan continues operating within the time period according to the timer setting, then shuts down).
  • The fan is mounted directly into the ventilation shaft.
  • Flexible duct application is recommended in case of remote location of the ventilation shaft. The air duct is connected to the fan exhaust flange through a clamp.
  • Fixed to wall by self-tapping screws.
  • Suitable for ceiling mounting.
  • For 12 V low-voltage motor fan connection to 220 V/50 Hz power mains use the step-down transformer TRF 220/12-25 that is available upon separate order.
Parameter VENTS 150 S (127-220 V/60 Hz)
127 V
VENTS 150 S (127-220 V/60 Hz)
220 V
Measurement unit
Voltage 127 220 V
Frequency 60 60 Hz
Power consumption 25 25 W
Air capacity 267 267 m³/h
Current 0.175 0.388 A
RPM 2350 2350 min-1
Sound pressure level at 3 m 38 38 dBА
Spigot size 150 100 mm
Engine Type 127-220 V/60 Hz 127-220 V/60 Hz -
Duct diameter 150 150 mm
Design axial axial -
IP Code IP 34 IP 34 -
Mass 1.13 1.13 kg
Type exhaust exhaust -
Mounting wall mounting, ceiling mounting wall mounting, ceiling mounting -
Capacity diagram
Capacity diagram
  • Selection method:
  • Air flow:
  • Pressure:
Operating point
  • Air flow: --
  • Pressure: ---
Files archieve
Select document type
  • Advertising and printing products
  • Certificates
  • Technical documentation
"VENTS S" product description 04-2020 (pdf 3.48Mb)
Download high quality image "VENTS S" (psd 2.47Mb)
Declaration of сonformity "S,S L" (pdf 1.6Mb)
Declaration of сonformity "D,S (12V)" (pdf 1.74Mb)
"VENTS domestic fans" user's manual 01-2022 (V01EN_16-01) (pdf 5Mb)
Download image "VENTS S" for your website (png 568.47Kb)
Certificate GS "K,K1,PF,М,D,S,LD,М1,+L" (pdf 124.5Kb)
Certificate LVD "K,K1,PF,М,D,S,LD,М1,MA+turbo (12V)" (pdf 473.42Kb)
"VENTS S" user's manual 10-2022 (V202-2EN-01) (pdf 1.6Mb)
VENTS 150 S (127-220 V/60 Hz)
Parameter Value Measurement unit
Ø D 150 mm
B 205 mm
H 165 mm
L 132 mm
L1 14 mm
Designation key
Designation key
  S1 Shortened flange model.
S К Fan is equipped with a backdraft damper for back flow preventing.
S L The motor is equipped with ball bearings for long service life (appr. 40 thousand hours) and fan mounting at any angle. The bearings are maintenance-free and contain enough grease for the entire operating period.
S turbo High-powered motor.
S 12 Modification with low-voltage motor. 12 V AC power supply.
S T Equipped with a regulated timer with the operating time from 2 to 30 minutes.
S TH Equipped with a timer with the operating time from 2 to 30 minutes and a humidity sensor with the threshold value from 60 to 90 %.
S V Equipped with a pull cord switch.
S VТ Equipped with a pull cord switch and a regulated timer with the operating time adjustable from 2 to 30 minutes.
S VTH Equipped with a pull cord switch, regulated timer with the operating time adjustable from 2 to 30 minutes and a humidity sensor with the operating threshold range from 60 to 90 %.
Example of installation
Example of installation

Accessories Similar products
Share your opinion

Is our site helpful for your business development?