Login

Privacy Policy (GDPR)
Authorization
Not registered yet? Take advantages of registration:
Products saving in a binding to the projects
Product consultation from our experts - Online
Registration
Signup
By using this form, you confirm that you have read the site terms of use Terms of use and completely accept the terms of use

Vents 150 Z star

  • Description
  • Characteristics
  • Capacity diagram
  • Downloads
  • Modifications
  • Dimensions
  • Wiring plan
  • Legend
Description
Description
APPLICATIONS              
  • Continuous or periodic air extraction of bathroom, showers, kitchens and other utility spaces.
  • Ventilation shaft mounting or duct connection.
  • Delivery of low and medium intensity air flow to small distances over a low-resistance ventilation system.
  • Compatible with 100, 125 and 150 mm ducting.
DESIGN              
  • The polished steel front panel with various ornamental modifications.
  • Modern design and aesthetic look.
  • The casing and the impeller are made of high-quality durable ABS plastic, UV resistant.
  • The intellectual impeller design makes the fan efficiency high and the service life long.
  • Protection rating IP 24.
   
  • A 2 W LED lamp is integrated into the fan casing.
   
MOTOR              
  • Reliable and energy-efficient electric motor.
  • Intended for continuous operation and maintenance-free.
  • Equipped with integral overheating protection.
FRONT PANEL MODIFICATIONS        
   
  Z star 1 Z star 2 Z star 3 Z star 4 Z star 5 Z star 6  
CONTROL  

Manual:

  • The fan is controlled by a room light switch. It is not included in the delivery package.
  • Speed control is possible through a thyristor speed controller (see Electrical Accessories). Several fans may connected to the same controller. Speed controllers can not be connected to the fans with TTHTPVTVTH modification.

Automatic:

  • By means of electronic control unit BU-1-60 (see Electrical Accessories). The control unit is supplied separately.
  • By means of timer (the built-in shutdown delay timer enables fan operation for additional 2 to 30 minutes after switching off).
  • By means of the humidity sensor and timer TH (if the room humidity exceeds the sensor threshold adjustable within 60-90% the fan will switch on automatically and operate until the humidity level reverts to normal; the fan will run as pre-programmed and shut down).
MOUNTING  
  • The fan is mounted directly into the ventilation shaft opening.
  • If the ventilation shaft remoteness prevents direct installation flexible ducts may be used. The ducts are coupled with the fan outlet flange by means of a clamp.
  • Fixed to the wall on self-tapping screws.
  • For 12 V low-voltage motor fan connection to 220 V / 50 Hz power mains use the step-down transformer TRF 220/12-25 that is available upon separate order.
MOUNTING EXAMPLE  
Characteristics
Characteristics
Parameter Vents 150 Z star
VENTS 150 Z star L
Measurement unit
Duct diameter 150 150 mm
Design axial axial -
Voltage 220-240 220-240 V
Frequency 50; 60 50; 60 Hz
Power consumption 24 24 W
Air capacity 258 258 m³/h
Current 0.13 0.13 A
RPM 2400 2400 min-1
Sound pressure level at 3 m 37 37 dBА
Weight 0.94 0.94 kg
Spigot size 150 150 mm
Engine Type 220-240V / 50Hz or 220-240V / 60Hz 220-240V / 50Hz or 220-240V / 60Hz -
Protection rating IP 24 IP 24 -
Type exhaust exhaust -
Mounting wall mounting, ceiling mounting wall mounting, ceiling mounting -
Capacity diagram
Capacity diagram
  • Selection method:
  • Air flow:
  • Pressure:
Operating point
  • Air flow: --
  • Pressure: ---
Files archieve
Downloads
Name
Brochure "VENTS Z star" (pdf 3.6Mb)
Download high quality image "VENTS Z star" (psd 2.3Mb)
Certificate LVD "Z star" (pdf 232.44Kb)
Certificate LVD "Z star,Vitro star (12V)" (pdf 213.07Kb)
Certificate GS "Z star" (pdf 243.46Kb)
Certificate CB Test Report "X star,Z star" (pdf 19.01Mb)
Certificate CB Test Report "X star,Z star (12V)" (pdf 4.42Mb)
Certificate CB "X star,Z star (12V)" (pdf 4.08Mb)
User's manual "VENTS Z,Vitro,Z star,Vitro star" (pdf 3.72Mb)
Download image "VENTS Z star" for your website (png 507.25Kb)
Declaration of сonformity RoHS "Domestic fans VENTS" (pdf 1.34Mb)
Modifications
Modification name Light Ball bearing motor
Vents 150 Z star -
VENTS 150 Z star L
+
+
Dimensions
Characteristics
Vents 150 Z star
Parameter Value Measurement unit
∅D 150 mm
B 231 mm
H 165 mm
L 171 mm
L1 56 mm
Wiring plan
Wiring plan
Wiring diagram for the fans equipped with a built-in switch Wiring diagram for the fans without built-in switch
Wiring diagram for the fans equipped with a timer / timer, humidity sensor and a built-in switch Wiring diagram for the fans equipped with a timer / timer with a humidity sensor without built-in switch
Wiring diagram for the fans with a light lamp. Separate activation of the fan and the built-in lamp. Wiring diagram for the fans with a light lamp. Parallel activation of the fan and the built-in lamp.
Wiring diagram for the fans with an light lamp and grounding. Separate activation of the fan and the built-in lamp. Wiring diagram for the fans with a light lamp and grounding. Parallel switching of the fan and the built-in lamp.
Wiring diagram for the fans with grounding  
 

* - only for fans designed for 12 V rated voltage (specified on the fan casing and packing).
S, S1, S2 - external switches.

Operating logic of the fans with optional equipment
  • The fan equipped with a timer is activated by the control voltage supplied to LT input. After the control voltage is disconnected the fan continues operating within the time period within 2 to 30 minutes according to the timer settings. The turn-off delay time is adjusted by turning the respective potentiometer T control knob clockwise to increase and counter-clockwise to reduce it.
  • The fan equipped with a timer and humidity sensor is activated by the control voltage supplied to LT input or in case of exceeding the preset humidity threshold value adjustable from ~60% to ~90%. After the control voltage is disconnected or as the humidity level H drops below the set threshold the fan continues operating within the time period within 2 to 30 minutes according to the timer settings.  The turn-off delay time and the threshold humidity level are adjusted by turning the control knob of the respective potentiometer T for timer and H for humidity sensor clockwise to increase and counter-clockwise to reduce the set value. To set the maximum humidity level (90%) set the potentiometer control knob for H max position.
  • The fan equipped with a timer and motion sensor is activated in case of the moving detection at the distance from 1 m to 4 m with 100° detection angle. After motion is off the fan continues operating within the time period within 2 to 30 minutes according to the timer settings. The turn-off delay time is adjusted by turning the respective potentiometer T control knob clockwise to increase and counter-clockwise to reduce it.
  • Wiring diagram for connection of the light lamp to the fan timer operated by the common switch is shown on diagram 4. Upon the light lamp disconnection the fan continues operating according to the timer setting within the set time period.
Legend
Legend

 

Picture symbol   Designation   Modification description
  Z star К   Fan is equipped with a backdraft damper for back flow preventing.
  Z star L   The motor is equipped with ball bearings for long service life (appr. 40 thousand hours) and fan mounting at any angle. The bearings are maintenance-free and contain enough grease for the entire operating period.
  Z star turbo   High-powered motor.
  Z star 12   Modification with low-voltage motor. 12 V AC power supply.
  Z star T*   Equipped with a regulated timer with the operating time from 2 to 30 minutes. Only for 100 mm fans.
  Z star TH*   Equipped with a timer with the operating time from 2 to 30 minutes and a humidity sensor with the threshold value from 60 to 90%. Only for 100 mm fans .

* only for Ø 100 mm fans

Share your opinion
I found this page useful to select the required products easy and quick
No difficulties with the site use. Everything is logical ad clear
The site produced a nice impression

Questionnaire
Where have you learned about us?