Privacy Policy (GDPR)
Not registered yet? Take advantages of registration:
Products saving in a binding to the projects
Product consultation from our experts - Online
By using this form, you confirm that you have read the site terms of use Terms of use and completely accept the terms of use

Vents VNV-1 80 KP

  • Description
  • Characteristics
  • Capacity diagram
  • Downloads
  • Dimensions
  • Legend
  • Exhaust ventilation of high-rise residential and non-residential premises with increased fire prevention requirements.
  • Suitable for premises with mono-pipe ventilation system.
  • Mounting in kitchens, bathrooms, toilets, storerooms and other household areas.
  • Supplied in fireproof casing KP 80 for flush mounting to wall.
  • Equipped with a maintenance-free fire-retarding damper. As the temperature in the shaft reaches 90°С the thermal fuse melts and the damper shuts automatically hot air access off, so the flame and smoke penetration though the ventilation shaft system is prevented.
  • The fire-retarding damper serves as a backdraft damper when the fan is off and prevents air moving from the ventilation shaft.
  • The front panel is made of high-quality durable ABS plastic.
  • The turnable front panel conceals possible inaccuracies of the fan casing installation.
  • Energy efficient 2- or 3-speed motor on ball bearings with minimum energy demand.
  • Automatic maintaining of constant pressure and air flow in the duct.
  • Fastened to the casing by means of latches with no tools.
  • For precise characteristics, low noise level and safe operation each turbine is dynamically balanced while assembly.
VNV-1 80 KP T — fan with timer.
VNV-1 80 КP TR — fan with regulated timer. 
VNV-1 80 КP I — fan with interval switch. 
VNV-1 80 КP F — fan with photosensor.

VNV-1 80 КP Н — fan with humidity sensor.
VNV-2 80 — fan with front panel from ground alumunium.
VNV-2 80 Chrome — fan with front panel from mirror finish aluminium.
VNV-2 80 Gold — fan with front panel from golden mirror finish aluminium.

  • In case of second room ventilation system the casing is equipped with extra branch pipes with three air duct layout modifications for adjacent room ventilation. In such a case the kit for exhaust ventilation of the adjacent room is used.
VNV-1 80 KP-R — fan with extra branch pipe on the right. 
VNV-1 80 KP-L — fan with extra branch pipe on the left. 

VNV-1 80 КP-D — fan with extra branch pipe on the bottom.

  • Speed switch is performed with the external manual speed switch. P3-1-300 switch for the three speed fan models and P2-1-300 for the two speed fan models. The speed switches are not included into the delivery set and are available upon order.
  • The fan casing is mounted during construction works and connected to the main ventilation shaft.
  • Electric wiring for connection of the VNV-1 80 ventilation unit is led out through a special hole in the casing.
  • The front panel is covered with the protective cardboard plate supplied with the unit to avoid damages or contamination during finishing works in the room.
  • After finishing the works the protective cardboard plate is removed and the VNV-1 80 ventilation unit is installed into the casing that is connected to the wiring.
Parameter Vents VNV-1 80 KP
speed 1
Vents VNV-1 80 KP
speed 2
Vents VNV-1 80 KP
speed 3
Measurement unit
Duct diameter 80 80 80 mm
Design centrifugal centrifugal centrifugal -
Engine Type 220В / 50Гц 220В / 50Гц 220В / 50Гц -
Voltage 220-240 220-240 220-240 V
Frequency 50 50 50 Hz
Power consumption 17 27 48 W
Air capacity 63 102 150 m³/h
Current 0.14 0.18 0.21 A
RPM 1350 1830 2640 min-1
Sound pressure level at 3 m 30 35.2 43.7 dBА
Maximum transported air temperature 50 50 50 °С
Electric connection Electric connection 4×1.5 4×1.5 4×1.5 mm²
Spigot size 80 80 80 mm
IP Code IP 55 IP 55 IP 55 -
Type exhaust exhaust exhaust -
Mounting wall mounting, ceiling mounting wall mounting, ceiling mounting wall mounting, ceiling mounting -
Capacity diagram
Capacity diagram
  • Selection method:
  • Air flow:
  • Pressure:
Operating point
  • Air flow: --
  • Pressure: ---
Files archieve
Certificate GS "VN" (pdf 412.38Kb)
Certificate LVD "VNV,VN" (pdf 2.02Mb)
User's manual "VENTS VN" (pdf 11.52Mb)
Download high quality image "VENTS VNV-1 80 KP" (psd 2.48Mb)
Brochure "VENTS VNV-1 80 KP" (pdf 523.58Kb)
Declaration of сonformity "VNV" (pdf 1.53Mb)
Declaration of сonformity "VN,VNV" (pdf 1.57Mb)
Declaration of сonformity RoHS "Domestic fans VENTS" (pdf 1.34Mb)
Download image "VENTS VNV-1 80 KP" for your website (png 536.67Kb)
Vents VNV-1 80 KP
Parameter Value Measurement unit

Options for 2 speed fan models

  • T — timer modification
  • TR — adjustable timer modification
  • I — interval switch modification
  • F — built-in photosensor modification
  • Н humidity sensor modification
Share your opinion
I found this page useful to select the required products easy and quick
No difficulties with the site use. Everything is logical ad clear
The site produced a nice impression

Please evaluate our updated site user friendliness