VENTS VUE 270 V5(B) EC

Print version Save in PDF format

Air handling unit in heat- and sound-insulated casing. Air flow up to 300 m³/h. Heat recovery efficiency up to 98 %.

Add to project

Add to compare

3D model

Gallery

Description
Characteristics
Capacity diagram
Downloads
Dimensions
Additional characteristics
Automation unit dimensions
Designation key
Video
Accessories

Description

DESCRIPTION

The air handling units are the fully featured ventilation units with heat recovery for air filtration, fresh air supply and stale air extract.
The extract air heat is used for warming up of the supply air stream in the high-efficient plate heat exchanger.

The units offer energy-efficient ventilation for cottages and flats and are compatible with round Ø 125 mm air ducts.

FILTER

Supply and extract air flows are purified through G4 panel filters.
For extra supply air filtration a F8 filter is available as a specially ordered accessory.

CASING

The casing is made of 15-26 mm thick expanded polypropylene (EPP) sheets, possessing high heat- and sound-insulating properties.

FANS

High-efficient electronically commutated motors with external motor and impeller with backward curved blades.
Such motors are the most state-of-the-art energy saving solution.

EC motors are featured with high performance and total speed controllable range.
High efficiency reaching 90 % is the premium advantage of the electronically commutated motors.

HEAT EXCHANGER

The VUT 270 V5(B) EC units are equipped with a counter- flow polystyrene heat exchanger. In the cold season the extract air heat is transferred to the intake air stream which reduces ventilation-generated heat losses.
This can lead to formation of condensate that is collected in a special drain pan and discharged into the sewage system. In the warm season the outside air heat is transferred to the exhaust air stream.
This allows for a considerable reduction of the supply air temperature which, in its turn, reduces the air conditioning load.

The VUE 270 V5(B) EC units are equipped with a counter-flow heat exchanger with an enthalpy at the core. In the cold season the extract air heat and moisture are transferred to the supply air stream through the enthalpy. Heat recovery minimises heat losses from ventilation.
In the warm season the outdoor air heat and moisture are transferred to the exhaust air stream through the enthalpy.
This enables considerable reduction of the supply air temperature and humidity which, in its turn, reduces the air conditioning load.

BYPASS

The VUT/VUE 270 V5B EC units are equipped with a bypass for summer ventilation (cooling of the premise with a cool outside air).

AUTOMATION

The VUT/VUE 270 V5B EC A21 units are equipped with control system. The A21 controller allows integrating the unit into the Smart Home system or BMS (Building Management Systems). Remote control panel is not included in the delivery set and is available as specially ordered accessory.
The unit is controlled via Wi-Fi by means of the VENTS AHU mobile application that must be downloaded.
The VUT/VUE 270 V5B EC A14 units are equipped with integrated control system and wall-mounted sensor control panel A14 with LED indication.
The VUT/VUE 270 V5B EC A2 units are equipped with R-1/010 speed controller.

FREEZE PROTECTION

INSTALLATION

For VUT/VUE 270 V5B EC A14, VUT/VUE 270 V5 EC A2 the freeze protection is realized by means of shutdown the supply fan.
For VUT/VUE 270 V5B EC A21 the freeze protection is realized by means of turning the preheater on.

The units are designed for wall and floor mounting.
The access for unit and filter maintenance is available on the right and left side.

CONTROL AND AUTOMATION

Functions	A21	A14	A2
External wired control panel	option (A22)	А14	speed controller R-1/010
Wired remote LCD control panel	option (А25)	-	-
External wireless control panel	option (A22 Wi-Fi)	-	-
BMS	RS-485 Wi-Fi Ethernet MODBUS (RTU, TCP)	-	-
Service Vents Cloud Server	+	-	-
Wi-Fi control via mobile application	+	-	-
Speed selection	+	+	+
Filter replacement indication	according to filter timer	according to filter timer
Filter replacement indication	according to pressure switch of filter clogging	-	-
Alarm indication	full alarm description in the mobile application	alarm LED indication	-
Week scheduled operation	+	-	-
Bypass	auto	-	-
Bypass	manual	manual	-
Timer	+	-	-
Boost mode	+	-	-
Fireplace mode	+	-	-
Freeze protection	cyclic shutdown of supply fan	cyclic shutdown of supply fan	cyclic shutdown of supply fan
Freeze protection	preheating (option)	-	-
Reheater connection	option	-	-
Cooler connection	option	-	-
Control of minimum supply air temperature	+	-	-
Humidity control	option	option	-
CO₂ control	option	option	-
VOC control	option	-	-
PM2.5 control	option	-	-
Fire detector	option	option	-
*Option. The function is available in case of mounting a respective accessory.

UNIT DESIGN

APPLICATION OPTIONS

Characteristics

Parameter	VUE 270 V5(B) EC	Measurement unit
Frequency	50/60	Hz
Phase	1	˜
Voltage	230	V
Maximum unit power	162	W
Maximum unit current	1.2	A
Air capacity	300	m³/h
Heat recovery efficiency	72...94	%
Transported air temperature	-25 ... +40	°С
Sound pressure level at 3 m distance	34	dBА
SEC class for A2	В	-
Insulation	EPP 15…26 mm	-
Casing material	expanded polypropylene	-
Filter: extract	G4	-
Filter: supply	G4, F8	-
Connected air duct diameter	125	mm
Mass	13.5	kg
Heat exchanger type	counter-flow	-
Heat exchanger material	enthalpy	-
SEC class for A14, A21	A	-

Capacity diagram

Selection method:
Air flow:
Pressure:

Operating point

Air flow: --
Pressure: ---

Files archieve

Downloads

Dimensions

Characteristics

Parameter	Value	Measurement unit
∅D	125	mm
B	590	mm
H	893	mm
L	316	mm

Additional characteristics

Sound power level, A – weighted		Gen.	Octave-frequency band [Hz]								LpA, 3 m dBA	LpA, 1 m dBA
Sound power level, A – weighted		dBA	63	125	250	500	1000	2000	4000	8000
L_WA to supply inlet	dBA	82	65	63	65	80	74	74	68	64
L_WA to supply outlet	dBA	66	60	56	55	63	58	49	40	33
L_WA to exhaust inlet	dBA	85	64	67	71	81	77	79	75	67
L_WA to exhaust outlet	dBA	71	51	64	62	68	60	60	50	42
L_WA to environment	dBA	55	37	45	44	53	43	43	40	38	34	44

Calculation of air temperature downstream of the heat exchanger:

t = t_outd + k_hr * (t_extr - t_outd) / 100,

where
t_outd - outdoor air temperature [°C]
t_extr - extract air temperature [°C]
k_hr - heat exchanger efficiency (according to the diagram) [%]

Exhaust air spigot configuration	Air flow [l/s]	Specific fan power [W/l/s]	Recovery efficiency [%]
Kitchen + 1 additional wet room	21	0.73	85
Kitchen + 2 additional wet rooms	29	0.86	84
Kitchen + 3 additional wet rooms	37	1.08	82
Kitchen + 4 additional wet rooms	45	1.39	81

Automation unit dimensions

	Dimensions [mm]
	L1	L2	L3	H1	H2	H3
External automation unit (only units with A21 automation)	324	313	93	180	330	196

Designation key

Series	Rated air flow [m³/h]	Installation type	Casing design	Bypass	Motor type	Control
VUT: ventilation with heat recovery VUE: ventilation with energy recovery	270	V: vertical	5: expanded polypropylene (EPP)	_ : no bypass B: integrated bypass	ЕС: synchronous electronically commutated motor	А2 A14 А21

Video

Accessories

Model	G4 panel filter	F8 panel filter	LCD control panel	Control panel	Wi-Fi controllable control panel	Internal humidity sensor	CO₂ sensor with indication	CO₂ sensor	Humidity sensor
Model
VUT 270 V5(B) EC A21	SF 264x182x18 G4	SF 264x182x18 F8	А25	А22	А22 Wi-Fi	HV2	CO2-1	CO2-2	HR-S
VUE 270 V5(B) EC A21			-	-	-
VUT 270 V5(B) EC A14			-	-	-
VUE 270 V5(B) EC A14			-	-	-
VUT 270 V5 EC A2			-	-	-	-	-	-	-
VUE 270 V5 EC A2			-	-	-	-	-	-	-

Model	VOC sensor (0-10 V)	CO2 sensor (0-10 V)	Humidity sensor (0-10 V)	Reheater	Preheater	Syphon kit	Air damper	Electric actuator
Model
VUT 270 V5(B) EC A21	DPWQ 30600	DPWQ 40200	DPWС 11200	NKD 125	NKP 125	SH-32	KRV 125	LF230
VUE 270 V5(B) EC A21	DPWQ 30600	DPWQ 40200	DPWС 11200	NKD 125	NKP 125	-
VUT 270 V5(B) EC A14	-	-	-	-	-	SH-32
VUE 270 V5(B) EC A14	-	-	-	-	-	-
VUT 270 V5 EC A2	-	-	-	-	-	SH-32	-	-
VUE 270 V5 EC A2	-	-	-	-	-	-	-	-