Vents VK 150 U

Inline centrifugal fans in plastic casing
  • Maximum airflow: 460 m3/h
  • Motor type: AC
  • Control: Built-in speed controller
  • Impeller type: Centrifugal impeller with backward curved blades
  • Casing material: Plastic
  • Installation in any position
  • Cable with mains plug
  • Temperature sensor
Unit of measurement VK 150 U
Connected air duct size mm 150
Minimum supply voltage V 220
Maximum supply voltage V 240
Power supply frequency Hz 50/60
Rated power W 80
Unit current A 0.35
Maximum airflow m3/h 460
Weight kg 2.45
Transported air temperature (max) °С 55
Transported air temperature (min) °С -25
Ingress protection rating - IPX4
Vents VK 150 U 66 400 2016
Trademark Vents
Model VK 150 U
Specific energy consumption (SEC) (kWh/(m2/a)) Cold Average Warm
-53.7 A+ -26.6 B -11.1 E
Type of ventilation unit Unidirectional
Type of drive installed Variable speed
Type of heat recovery system None
Maximum flow rate (m3/h) 400
Electric power input (W) 80
Reference flow rate (m3/s) 0.078
Reference pressure difference (Pa) 50
Specific power input (SPI) (W/(m3/h)) 0.129
Control typology Local demand control
Maximum external leakage rates (%) 2.7
Sound power level (dB(A)) 66
Declared typology RVU UVU
The annual electricity consumption (AEC) (kWh/a) Cold Average Warm
68 68 68
The annual heating saved (AHS) (kWh/a) Cold Average Warm
5536 2830 1280
Datasheet
"VENTS VK, VENTS VK Duo" product description 05-2022
2.4 Mb
Manual
"VENTS VK" user's manual 11-2024 (V02EN-15)
1.13 Mb
Image
VK 150 U - image 1
378 Kb
ØD ØD1 B L L1 L2 L3
150 300 310 286 30 30 30