Login

Privacy Policy (GDPR)
Authorization
Not registered yet? Take advantages of registration:
Products saving in a binding to the projects
Product consultation from our experts - Online
Registration
Signup
By using this form, you confirm that you have read the site terms of use Terms of use and completely accept the terms of use

VENTS VUE 150 P3B EC A14


Air handling unit with air capacity up to 215 m³/h. Heat recovery efficiency up to 82 %.

  • Description
  • Characteristics
  • Capacity diagram
  • Downloads
  • Dimensions
  • Designation key
  • Video
  • Accessories
Description
Description
APPLICATION
  • The air handling units VUE P3B EC are the fully-featured ventilation units that ensure air filtration, fresh air supply and stale air extract.
  • During the operation process the extract air heat is transferred to the supply air through the high-efficiency plate heat exchanger.
  • Compatible with round Ø100 or 150 mm air ducts.
DESIGN
  • The casing is made of polymer-coated steel panels, internally filled with polyurethane foam layer 5 or 10 mm (depending on the modification) for heat- and sound-insulation.
  • This service panel is used to access the filters and the heat exchanger for maintenance operations.
  • The spigots are located at the sides of the unit and are equipped with rubber seals for airtight connection to the air ducts.
  • The casing is equipped with fixing brackets to suspend the unit to the ceiling.
FANS
  • High-efficient electronically-commutated (EC) motors with an external motor.
  • The VUE 100 P3B EC A14, VUE 150 P3B EC A14 and VUE 250 P3B EC A14 are equipped with centrifugal impellers with forward curved blades.
  • The VUE 350 P3B EC A14 are equipped with centrifugal impellers with backward curved blades.
  • These state-of-the-art motors are the most advanced solution in energy efficiency today.
  • EC motors are characterised with high performance and optimum control across the entire speed range.
  • In addition to that, the efficiency of the electronically commutated motor reaches very impressive levels of up to 90 %.
HEAT RECOVERY
  • Plate enthalpy cross-flow heat exchanger made of polymerized cellulose with heat recovery efficiency up to 85 %.
  • The applied heat exchanger enables not only heat but also humidity recovery, which helps maintaining a defined humidity level.
  • In warm seasons the heat exchanger operates to cool down and dehumidify the supply air.
  • In cold seasons the heat exchanger operates to warm up supply air and humidify it.
  • Water vapour from the humid extract air is condensed and absorbed by the heat exchanger plates.
  • The recovered humidity and heat are transferred to the supply air flow.
  • The air streams are fully separated within the heat exchanger and the microbes and smells are isolated.

INSTALLATION
  • Due to a low casing height the air handling units are a perfect solution for space-restricted installation above suspended ceilings.
  • The unit mounting position must provide access for service maintenance.
BYPASS
  • The units are equipped with a bypass for summer ventilation (air cooling by the cool air from outside).
AIR FILTRATION
  • Two built-in panel filters with filtering class G4 and F8 provide efficient supply air filtration.
  • Extract air is cleaned by the built-in G4 filter.

CONTROL AND AUTOMATION
  • The VENTS VUE P3B EC A14 units have an integrated automation system with a wall-mounted control panel A14 with a LED indication.
  • The units are equipped with a USB connector (Type B) and can be connected to a PC for configuring the advanced settings in a special software.

  • The standard delivery set includes a 10 m cable for connection of the unit to the control panel.

A14 automation functions:

  • Turning the unit on/off.
  • Unit performance control (selection of Low, Medium or High speed).
  • Bypass damper opening and closing for summer ventilation.
  • Alarm indication.
  • Filter replacement notification.

Additional functions of the A14 automation with installed software

  • Fan speed adjustment from 0 to 100 %.
  • Each speed is individually adjusted for the supply and the extract fans.
  • Operation control on feedback from the HV-2 duct humidity sensor (to be ordered separately).
  • Unit operation setting according to the external relay (to be ordered separately).
  • Temperature setting for heat exchanger freeze protection system activation.
  • Control and operation adjustment of the filter maintenance timer.
  • Error code indication.
  • Software version upgrading.
  • External relay, bypass and humidity control.
APPLICATION
Characteristics
Characteristics
Parameter VUE 150 P3B EC A14
Measurement unit
Frequency 50/60 Hz
Phase 1 ˜
Voltage 230 V
Maximum unit power 83 W
Maximum unit current 0.7 A
Sound pressure level at 3 m distance 32 dBА
Air capacity 215 m³/h
RPM 2000 min-1
Humidity recovery efficiency 22...41 %
Heat recovery efficiency 68...82 %
Casing material painted steel -
Insulation 5 mm, 10 mm polyurethane foam -
Filter: extract G4 -
Filter: supply * option G4 и F8 (PM2.5 93 %) -
Connected air duct diameter 100 mm
Mass 26 kg
Heat exchanger type cross-flow -
Heat exchanger material polymerized cellulose -
SEC Class A -
Type supply and exhaust -
Capacity diagram
Capacity diagram
  • Selection method:
  • Air flow:
  • Pressure:
Operating point
  • Air flow: --
  • Pressure: ---
Files archieve
Downloads
Name
Brochure "VENTS VUE P3B EC" (pdf 1.39Mb)
Download high quality image "VENTS VUE P3B EC (ErP 2016, 2018)" (psd 3.48Mb)
Download image "VENTS VUE P3B EC (ErP 2016, 2018)" for your website (png 177.63Kb)
User's manual "VENTS VUE P3B EC" (pdf 4.63Mb)
Dimensions
Characteristics
VENTS VUE 150 P3B EC A14
Parameter Value Measurement unit
∅D 99 mm
A 854 mm
B 704 mm
H 227 mm
Designation key
Designation key
Series Rated air flow [m³/h] Mounting type Casing modification Bypass Motor type Control panel
VENTS VUE 100; 150; 250; 350 P: suspended З: low-profile unit B: integrated bypass ЕС: synchronous electronically commutated motor А14
Video
Video

Accessories
Accessories
Model G4 panel filter F8 panel filter Internal humidity sensor (0-10 V) External CO2 sensor External CO2 sensor with indication External humidity sensor Hydraulic kit Air dampers Electric actuator
VUE 100 P3B EC A14 SF 200х191х20 G4 SF 200х191х20 F4 HV-2 CO2-1 CO2-2 HR-S SG-32 KRV 100 LF230
VUE 150 P3B EC A14 SF 300х220х48 G4 SF 300х220х48 F8
VUE 250 P3B EC A14 KRV 150
VUE 350 P3B EC A14 SF 300х270х48 G4 SF 300х270х48 F8
Share your opinion
I found this page useful to select the required products easy and quick
No difficulties with the site use. Everything is logical ad clear
The site produced a nice impression

Questionnaire
Basic parameter for domestic fan selection