Login

Privacy Policy (GDPR)
Authorization
Not registered yet? Take advantages of registration:
Products saving in a binding to the projects
Product consultation from our experts - Online
Registration
Signup
By using this form, you confirm that you have read the site terms of use Terms of use and completely accept the terms of use

VENTS VUE 300 P3 A3


Three-speed air handling units in heat- and sound-insulated casing. Air flow up to 340 m³/h. Heat recovery efficiency up to 87 %.

  • Description
  • Characteristics
  • Capacity diagram
  • Downloads
  • Dimensions
  • Designation key
  • Accessories
Description
Description
APPLICATION  
  • The VUE P3 A3/A4 air handling units are the fully-featured ventilation units that ensure air filtration, fresh air supply and stale air extract.
  • During the operation process the extract air heat is transferred to the supply air through the plate heat exchanger.
  • The units are used in ventilation systems installed in various premises that require reasonable energy saving solutions and controllable ventilation systems.
  • All models are designed for connection to ø100 and 150 mm round air ducts.
FANS DESIGN
  • The single-phase three-speed motors with an external rotor and an impeller with forward curved blades.
  • The motors have an integrated overheating protection with an automatic restart.
  • The casing is made of polymer-coated steel panels, internally filled with polyurethane foam layer of 5 or 10 mm for heat- and sound-insulation.
HEAT RECOVERY  
  • The plate enthalpy cross-flow heat exchanger with heat recovery efficiency up to 87 %.
  • The applied heat exchanger enables not only heat but also humidity recovery, which helps maintaining an optimum humidity level.
  • In warm seasons the heat exchanger operates to cool down and dehumidify the supply air. In cold seasons the heat exchanger operates to warm up supply air and to humidify it
  • The recovered humidity and heat are transferred to the supply air flow.
  • The air streams are fully separated within the heat exchanger and the microbes and smells are isolated.
FILTER CONTROL AND AUTOMATION
  • Two integrated panel filters with filtering class G4 and F8 provide efficient supply air filtration.
  • Extract air is cleaned by an integrated G4 filter.

 

  • The unit is equipped with an integrated control system, a mechanical three-speed speed controller P3-1-300 or a sensor three-speed speed controller SP3-1, and a power cable with a mains plug.
P3-1-300 SP3-1
  • The service side of the unit is equipped with a removable hatch for filter and heat exchanger cleaning and replacement operations.
  • The control unit is positioned inside the unit casing.
  • The power cable and grounding cables are connected to the control unit via the cable glands placed at the side of the unit.
FREEZE PROTECTION INSTALLATION
  • The heat exchanger freeze protection operates as follows: in case of freezing danger determined by the temperature sensor, the supply fan is turned off to let extract air warm up the heat exchanger.
  • Due to a low casing height the air handling units are a perfect solution for space-restricted installation above suspended ceilings.
  • The unit mounting position must provide access for service maintenance.
APPLICATION  
Characteristics
Characteristics
Parameter VUE 300 P3 A3
Measurement unit
Frequency 50 Hz
Phase 1 ˜
Voltage 220-240 V
Power 193 W
Current 0.84 A
Sound pressure level at 3 m distance 52 dBА
Air capacity 340 m³/h
RPM 2720 min-1
Regeneration efficiency 66...87 %
Humidity recovery efficiency 22...47 %
Transported air temperature -25 ... +40 °С
Casing material painted steel -
Insulation 5 mm, 10 mm polyurethane foam -
Filter: extract G4 -
Filter: supply * option G4 и F8 (PM2.5 93 %) -
Connected air duct diameter 150 mm
Mass 27 kg
Heat exchanger type cross-flow -
Heat exchanger material enthalpy -
SEC Class E -
Capacity diagram
Capacity diagram
  • Selection method:
  • Air flow:
  • Pressure:
Operating point
  • Air flow: --
  • Pressure: ---
Files archieve
Downloads
Name
User's manual "P3-1-300" (pdf 1.42Mb)
User's manual "SP3-1" (pdf 325.19Kb)
Brochure "VENTS VUE P3 A3/A4" (pdf 6.66Mb)
Download high quality image "VENTS VUE P3 A3/A4" (psd 1.48Mb)
Download image "VENTS VUE P3 A3/A4" for your website (png 279.11Kb)
User’s manual "VENTS VUE P3 A3/A4" (pdf 1.56Mb)
Dimensions
Characteristics
VENTS VUE 300 P3 A3
Parameter Value Measurement unit
∅D 150 mm
A 854 mm
B 704 mm
H 227 mm
Designation key
Designation key
Series Rated air flow [m3/h] Design features Casing modification Control panel
VENTS VUE: ventilation with energy recovery 100, 200, 300, 450 P: suspended mounting 3: low-profile unit A3: P3-1-300 speed controller
A4: SP3-1 sensor speed controller
Accessories
Accessories
Model G4 panel filter F8 panel filter
VUE 100 P3 A3/A4 SF 200x191x20 G4 SF 200x191x40 F8
VUE 200 P3 A3/A4 SF 300x220x48 G4 SF 300x220x48 F8
VUE 300 P3 A3/A4
VUE 450 P3 A3/A4 SF 300x270x48 G4 SF 300x270x48 F8
Share your opinion
I found this page useful to select the required products easy and quick
No difficulties with the site use. Everything is logical ad clear
The site produced a nice impression

Questionnaire
How often do you use equipment selection program?