Vents VUE 300 V2 mini EC A14

Air handling units equipped with an enthalpy cross flow heat exchanger
  • Maximum airflow: 300 m3/h
  • Sound pressure level LpA at 3 m: 33 dB(A)
  • Heat exchanger type: Cross flow
  • Extract filter: G4
  • Supply filter: G4, F8
  • Sound insulation
  • Motor type: EC
  • Enthalpy heat exchanger
  • Control: Remote Control
  • Casing material: Galvanized steel
  • Humidity sensor: Optional
  • CO2 sensor: Optional
  • VOC sensor: Optional
  • PM2.5 sensor: Optional
Unit of measurement VUE 300 V2 mini EC A14
Connected air duct size mm 125
Speed - 1
Minimum supply voltage V 230
Maximum supply voltage V 230
Power supply frequency Hz 50/60
Rated power W 165
Unit current A 1.3
Maximum airflow m3/h 300
Sound pressure level LpA at 3 m dB(A) 33
Heat recovery efficiency, max % 73
Heat exchanger type - Cross flow
Heat exchanger material - Enthalpy
Weight kg 28
Extract filter - G4
Supply filter - G4, F8
Transported air temperature (max) °С 60
Transported air temperature (min) °С -25
Ambient air temperature min °С 1
Ambient air temperature max °С 40
Ambient air humidity max % 80
Ingress protection rating - IP22
Ingress protection rating of the drive - IP44
Manual
"VENTS VUT(VUE) 250 V(H) mini A12 / A1" user's manual 12-2023 (V25EN-06)
8.62 Mb
Manual
"VENTS VUT/VUE 300 V2/H2 mini EC" user's manual 07-2021 (V161EN-03)
9.67 Mb
Datasheet
"VENTS VUT/VUE V2/H2 mini EC" product description 04-2024
1.22 Mb
Image
VUE 300 V2 mini EC A14 - image 1
408 Kb
Vents VUE 300 V2 mini EC A14 - Dimensions
ØD B H H1 L L1
125 287 447 495 714 776
Name Photo Description
Vents HV2 HV2 Humidity sensor
Vents CO2-1 CO2-1 CO2 sensors
Vents CO2-2 CO2-2 CO2 sensors
Vents HR-S HR-S Electro-mechanical humidistats
Name Photo Description
Vents SR 125/600 SR 125/600 Silencer is applied for noise absorption produced during the ventilating equipment operation and spread along the ducting systems
Vents SR 125/900 SR 125/900 Silencer is applied for noise absorption produced during the ventilating equipment operation and spread along the ducting systems
Vents SR 125/1200 SR 125/1200 Silencer is applied for noise absorption produced during the ventilating equipment operation and spread along the ducting systems
Vents SRF 125/600 SRF 125/600 Silencer is applied for noise absorption produced during the ventilating equipment operation and spread along the ducting systems
Vents SRF 125/900 SRF 125/900 Silencer is applied for noise absorption produced during the ventilating equipment operation and spread along the ducting systems
Vents SRF 125/2000 SRF 125/2000 Silencer is applied for noise absorption produced during the ventilating equipment operation and spread along the ducting systems
Name Photo Description
Vents KOM 125 KOM 125 Spring-loaded backdraft damper for round ducts
Vents KRV 125 KRV 125 Air damper for air flow cut-off in round air ducts
Name Photo Description
Vents SH-32 SH-32 The hydraulic U-trap for condensate drainage from heat exchangers and coolers in ventilation and air conditioning systems
Name Photo Description
Vents Belimo LF230 Belimo LF230 The Belimo LF series actuators are designed for controlling air dampers with cross section up to 0.8 m² performing protection functions
Other accessories
Name Photo Description
Vents SF 240x184x40 G4 SF 240x184x40 G4 Panel filter G4
Vents SF 240x184x40 F8 SF 240x184x40 F8 F8 panel filter