Unit of measurement | VUT 300 V2 mini EC A14 | |
Connected air duct size | mm | 125 |
Minimum supply voltage | V | 230 |
Maximum supply voltage | V | 230 |
Power supply frequency | Hz | 50/60 |
Rated power | W | 165 |
Unit current | A | 1.3 |
Maximum airflow | m3/h | 300 |
Sound pressure level LpA at 3 m | dB(A) | 33 |
Heat recovery efficiency, max | % | 79 |
Heat exchanger type | - | Cross flow |
Heat exchanger material | - | Polystyrene |
Weight | kg | 32 |
Extract filter | - | G4 |
Supply filter | - | G4, F8 |
Transported air temperature (max) | °С | 60 |
Transported air temperature (min) | °С | -25 |
Ambient air temperature min | °С | 1 |
Ambient air temperature max | °С | 40 |
Ambient air humidity max | % | 80 |
Ingress protection rating | - | IP22 |
Ingress protection rating of the drive | - | IP44 |
Trademark | Vents | |||||
Model | VUT 300 V2 mini EC A14 | |||||
Specific energy consumption (SEC) (kWh/(m2/a)) | Cold | Average | Warm | |||
-70.5 | A+ | -36.6 | A | -14.5 | E | |
Type of ventilation unit | Bidirectional | |||||
Type of drive installed | Variable speed | |||||
Type of heat recovery system | Recuperative | |||||
Thermal efficiency of heat recovery (%) | 62 | |||||
Maximum flow rate (m3/h) | 250 | |||||
Electric power input (W) | 150 | |||||
Reference flow rate (m3/s) | 0.044 | |||||
Reference pressure difference (Pa) | 50 | |||||
Specific power input (SPI) (W/(m3/h)) | 0.313 | |||||
Control typology | Local demand control | |||||
Maximum internal leakage rates (%) | 2.7 | |||||
Maximum external leakage rates (%) | 2.7 | |||||
Declared typology | RVU BVU | |||||
Sound power level (dB(A)) | 53 | |||||
The annual electricity consumption (AEC) (kWh/a) | Cold | Average | Warm | |||
747 | 210 | 165 | ||||
The annual heating saved (AHS) (kWh/a) | Cold | Average | Warm | |||
8047 | 4114 | 1860 |
ØD | B | H | H1 | L | L1 |
---|---|---|---|---|---|
125 | 287 | 447 | 495 | 714 | 776 |
Name | Photo | Description |
---|---|---|
Vents HV2 | Humidity sensor | |
Vents CO2-1 | CO2 sensors | |
Vents CO2-2 | CO2 sensors | |
Vents HR-S | Electro-mechanical humidistats |
Name | Photo | Description |
---|---|---|
Vents SR 125/600 | Silencer is applied for noise absorption produced during the ventilating equipment operation and spread along the ducting systems | |
Vents SR 125/900 | Silencer is applied for noise absorption produced during the ventilating equipment operation and spread along the ducting systems | |
Vents SR 125/1200 | Silencer is applied for noise absorption produced during the ventilating equipment operation and spread along the ducting systems | |
Vents SRF 125/600 | Silencer is applied for noise absorption produced during the ventilating equipment operation and spread along the ducting systems | |
Vents SRF 125/900 | Silencer is applied for noise absorption produced during the ventilating equipment operation and spread along the ducting systems | |
Vents SRF 125/2000 | Silencer is applied for noise absorption produced during the ventilating equipment operation and spread along the ducting systems |
Name | Photo | Description |
---|---|---|
Vents KOM 125 | Spring-loaded backdraft damper for round ducts | |
Vents KRV 125 | Air damper for air flow cut-off in round air ducts |
Name | Photo | Description |
---|---|---|
Vents SH-32 | The hydraulic U-trap for condensate drainage from heat exchangers and coolers in ventilation and air conditioning systems |
Name | Photo | Description |
---|---|---|
Vents Belimo LF230 | The Belimo LF series actuators are designed for controlling air dampers with cross section up to 0.8 m² performing protection functions |
Name | Photo | Description |
---|---|---|
Vents SF 240x184x40 G4 | Panel filter G4 | |
Vents SF 240x184x40 F8 | F8 panel filter |
Name | Photo | Description |
---|---|---|
Vents KH-1 | The kitchen exhaust hood is designed to clean air from combustion products, fumes, odors that form during cooking in the kitchen |