Privacy Policy (GDPR)
Not registered yet? Take advantages of registration:
Products saving in a binding to the projects
Product consultation from our experts - Online
By using this form, you confirm that you have read the site terms of use Terms of use and completely accept the terms of use


  • Description
  • Characteristics
  • Capacity diagram
  • Downloads
  • Dimensions
  • Technical data
  • Designation key
  • Accessories
  • Air handling unit VUT H is a complete ventilation units designed for air filtration and supply to the premises and exhaust air removal.

  • During the operation process the extract air heat is transferred to the supply air through the plate heat exchanger.

  • All the models are designed for connection with Ø 125, 150, 160, 200, 250, 315 mm round ducts.

  • The casing is made of aluminium profile, double skinned with 20 mm mineral wool heat-and sound-insulating layer.

  • Two incorporated G4 panel filters for extract air ventilation are supplied with the unit.

  • The unit is equipped with supply and exhaust centrifugal double-inlet fans with forward curved blades and built-in thermal overheating protection with automatic restart.

  • The electric motors and impellers are dynamically balanced in two planes.
  • The ball-bearings used with motors are designed for at least 40 000 hours operation and are maintenance-free.
  • The cross-flow air-to-air heat exchanger is made of polystyrol.

  • Whenever heat recovery is not required the heat exchanger block can be easily replaced by a “summer” block.

  • The unit is also equipped with the drain pan for condensate water drainage as well as built-in freezing protection system. Its operating principle is based on switching the supply fan off as the temperature sensor requires. Warm extract air heats the heat exchanger. Then the supply fan switches on and the unit continues operating under rated conditions.
  • The motor speed is controlled by means of 4-step control switch by means of selecting the minimum, average or maximum speed or the unit shutdown.

  • Air handling unit is mounted on the floor and suspended to the ceiling by means of a seat angle with anti-vibration mounts or attached to a wall with brackets.

  • The unit can be mounted either in service spaces or in main premises above the suspended ceiling, in the pocket or can be placed directly in the room.

  • Mounting in any position shall provide correct condensate drainage.

  • Access for the fan maintenance and filter cleaning shall be provided from outside of the side panels.

VENTS VUT H unit air exchange example in the flat
Parameter VUT 600 H
Measurement unit
Frequency 50/60 Hz
Phase 1 ˜
Voltage 230 V
Maximum fan power 2 pcs. x 195 W
Air capacity 600 m³/h
Total unit power 390 W
Fan current 2 pcs. x 0.86 A
Total unit current 1.72 A
RPM 1350 min-1
Maximum transported air temperature -25..+40 °С
Heat recovery efficiency 85 -
Sound pressure level at 3 m distance 32-48 dBА
Heating without heating -
Casing material aluzinc -
Insulation 25 mm mineral wool -
Filter: extract G4 -
Filter: supply G4 -
Connected air duct diameter 200 mm
Mass 54 kg
Heat exchanger type cross-flow -
Heat exchanger material polystyrol -
SEC Class E -
Type supply and exhaust with heat recovery -
Mounting floor mounting -
Capacity diagram
Capacity diagram
  • Selection method:
  • Air flow:
  • Pressure:
Operating point
  • Air flow: --
  • Pressure: ---
Files archieve
Certificate LVD "VUT H" (pdf 225.03Kb)
Certificate CB Test Report "VUT H" (pdf 11.93Mb)
Certificate GS "VUT H" (pdf 224.05Kb)
Brochure "VENTS VUT H" (pdf 1.56Mb)
Download high quality image "VENTS VUT H (ErP 2016)" (psd 4.38Mb)
User's manual "VENTS VUT H" (pdf 2.27Mb)
Declaration of сonformity "VUT H" (pdf 1.57Mb)
Download image "VENTS VUT H (ErP 2016)" for your website (png 371.07Kb)
Parameter Value Measurement unit
∅D 199 mm
B 416 mm
B1 300 mm
B2 54 mm
H 603 mm
H1 230 mm
H2 148 mm
L 722 mm
L1 768 mm
Technical data
Technical data
Sound-power level Octave-frequency band [Hz]
  Hz Gen 63 125 250 500 1000 2000 4000 8000
LwA to inlet dBA 57 36 53 53 41 48 46 38 25
LwA to outlet dBA 66 44 61 63 59 50 50 39 29
LwA to environment dBA 40 26 29 37 35 25 23 26 27
Designation key
Designation key
Series Rated air flow [m3/h] Duct connection
VENTS VUT 350; 500; 530; 600; 1000; 2000 H: horizontal
Model G4 panel filter Silencers Back valves Air dampers Clamps Summer blocks
VUT 350 H SF 378x210x48 G4 SR 125 600/900/1200 SRF 125 600/900/1200 KOM 125 KR 125 С 125 VL C4 200/384
VUT 500 H SR 150 600/900/1200 SRF 150 600/900/1200 KOM 150 KR 150 C 150 VL C4 200/384
VUT 530 H SR 160 600/900/1200 SRF 160 600/900/1200 KOM 160 KR 160 C 160 VL C4 200/384
VUT 600 H SR 200 600/900/1200 SRF 200 600/900/1200 KOM 200 KR 200 C 200 VL C4 200/384
VUT 1000 H SF 450x295x48 G4 SR 250 600/900/1200 SRF 250 600/900/1200 KOM 250 KR 250 C 250 VL C4 300/450
VUT 2000 H SF 750x295x48 G4 SR 315 600/900/1200 SRF 315 600/900/1200 KOM 315 KR 315 C 315 VL C4 300/750
Share your opinion
I found this page useful to select the required products easy and quick
No difficulties with the site use. Everything is logical ad clear
The site produced a nice impression

How often do you use equipment selection program?