Privacy Policy (GDPR)
Not registered yet? Take advantages of registration:
Products saving in a binding to the projects
Product consultation from our experts - Online
By using this form, you confirm that you have read the site terms of use Terms of use and completely accept the terms of use


Air handling unit in heat- and sound-insulated casing with a water heater. Air flow up to 1200 m³/h. Heat recovery efficiency up to 95 %.

  • Description
  • Characteristics
  • Capacity diagram
  • Downloads
  • Dimensions
  • Designation key
  • Accessories
  • The air handling units VUTR WH EC with a water heater are the fully-featured ventilation units that ensure air filtration, fresh air supply and stale air extract.

  • During the operation process the extract air heat is transferred to the supply air through the rotary heat exchanger.

  • The units are used in ventilation and air conditioning systems installed in various premises that require reasonable energy saving solutions and controllable ventilation systems.

  • EC motors reduce energy demand by 1.5-3 times and ensure high performance and low noise operation. 

  • The VUTR 400/700/900/1200/1500 WH EC units are compatible with round air ducts (Ø 160, 250 and 315 mm).

  • The VUTR 2000 WH EC units are compatible with rectangular air ducts (500x300).

  • The casing consists of a frame and three-layer 20 mm (VUTR 1500 and 2000 – 25 mm) thick panels made of zinc aluminium internally filled with mineral wool for reliable heat- and sound-insulation.

  • Due to the specially designed removable side panels the unit requires little space for servicing and accessing to all the unit components.

  • The two integrated G4 filters ensure sufficient supply and extract air purification.

  • The air handling units are equipped with high-efficiency electronically commutated (EC) direct current motors with an external rotor and backward-curved blades.

  • These state-of-the-art motors offer the very best in energy efficiency today.

  • In addition to that, EC motors combine high performance and optimum control over the entire speed range.

  • The high efficiency (up to 90 %) is a definite advantage of EC motors.

  • The rotary heat exchanger is a short rotating cylinder filled with layers of corrugated aluminium tape packaged in a such way so as to enable free passage of the supply and extract air flows.

  • As the cylinder rotates the aluminium tape contained in the heat exchanger is first exposed to the supply air stream and then - to the extract air stream.

  • As a result the material undergoes repeated warming and heating cycles thereby transferring heat and humidity from the warm air stream to the cold one.

  • Compared to plate-type devices a rotary heat exchanger demonstrates better efficiency and helps maintain a comfortable air humidity level while reducing frostbite danger to a bare minimum (tending to zero at normal temperature and humidity).

  • The air handling units are equipped with water heaters to operate at low outside temperatures.

  • If heat recovery is not sufficient to reach the set supply air temperature, the heater is activated to warm up supply air.
  • The heaters are equipped with protecting devices to ensure safe and reliable operation of the unit.

  • The water heaters are designed for maximum operating pressure 1.0 MPa (10 bar) and maximum heat medium operating temperature +95 °C.
  • The VUTR WH EC A17 units are equipped with a th-Tune control panel.

  • The VUTR WH EC A18 units are equipped with a pGD1 control panel.
  • Speed selection: low, medium, high.
  • Speed is individually adjusted from 0 to 100 % for the supply and the extract fans.
  • Filter maintenance indication.
  • Alarm indication.
  • Timer-based operation.
  • Week-scheduled operation.
  • Supply air temperature control.
  • CCU control.
  • Air damper actuator controlling.
  • The unit is designed for mounting to a horizontal plane, suspension to a ceiling or wall mounting by means of brackets.
  • Service access is from the left side panel (in air direction).
  • The water heater pipes on the VUTR WH EC unit are leaded to the service side, on the left (in air direction).

t = toutd + khr * (text - toutd) / 100, 


toutd – outdoor air temperature [°C],

text – extract air temperature [°C],

khr – heat exchanger efficiency 

(according to the diagram) [%]



Parameter VUTR 1200 WH EC
Measurement unit
Phase 1 ˜
Voltage 230 V
Maximum fan power 2 x 208 W
Frequency 50/60 Hz
Sound pressure level at 3 m distance 60 dBА
Total unit power 570 W
Total unit current 2.5 A
Maximum air capacity 1200 m³/h
RPM 1930 min-1
Heat recovery efficiency 73...95 %
Transported air temperature -25 ... +40 °С
Casing material aluzinc -
Insulation 20 mm mineral wool -
Filter: extract G4 -
Filter: supply G4 -
Connected air duct diameter 315 mm
Mass 165 kg
Heat exchanger type rotary -
Heat exchanger material aluminium -
Capacity diagram
Capacity diagram
  • Selection method:
  • Air flow:
  • Pressure:
Operating point
  • Air flow: --
  • Pressure: ---
Files archieve
Select document type
  • Advertising and printing products
  • Certificates
  • Technical documentation
Download high quality image "VENTS VUTR 400, 700, 900 EH/WH EC (ErP 2016, 2018)" (psd 4.08Mb)
"VENTS VUTR EH/WH EC" product description 05-2022 (pdf 3.51Mb)
"VENTS VUTR WH EC" user's manual 02-2019 (V78EN-05) (pdf 8.35Mb)
Download image "VENTS VUTR 400, 700, 900 EH/WH EC (ErP 2016, 2018)" for your website (png 215.48Kb)
Download high quality image "VENTS VUTR 1200, 1500 EH/WH EC (ErP 2016, 2018)" (psd 4.49Mb)
Download image "VENTS VUTR 1200, 1500 EH/WH EC (ErP 2016, 2018)" for your website (png 356.99Kb)
Download high quality image "VENTS VUTR 2000 EH/WH EC (ErP 2016, 2018)" (psd 4.5Mb)
Download image "VENTS VUTR 2000 EH/WH EC (ErP 2016, 2018)" for your website (png 220.47Kb)
"BMS parameter table for PCOS004850 module for the VUTR units (with a heat pump)" user’s manual 04-2020 (V197-3EN-02) (pdf 65.99Kb)
"BMS parameter table for PCOS004850 module for VUTR units" user’s manual 10-2020 (V197-2EN-02) (pdf 223.5Kb)
Parameter Value Measurement unit
∅D 314 mm
A 1335 mm
E 373 mm
F 220 mm
G 438 mm
J 460 mm
H 880 mm
L 745 mm
Designation key
Designation key
Series Heat exchanger type Rated air flow, [m3/h] Heater type Pipe modification Motor type Control panel
VENTS VUT R: rotary heat exchanger 400; 700; 900; 1200; 1500; 2000 W: water H: horizontal ЕС: synchronous motor with electronic control А17: th-Tune
А18: pGD1
Model G4 supply pocket filter G4 extract panel filter Module Modbus-RS485 Outdoor air quality sensor Outdoor CO2 sensor Outdoor humidiry sensor Outdoor humidiry sensor Indoor humidiry sensor (0-10 V) Mixing unit Back valves Air damper Electric actuator
VUTR 400 WH ЕС SFK 393x235x27 G4 SFK 600x324x48 G4 PCOS004850 DPWQ 30600 DPWQ 40200 DPWC 11200 HR-S HV-2 USWK 3/4-4 KOM 160 KRV 160 TF230
VUTR 700 WH ЕС SFK 700x333x27 G4 SFK 700x332x48 G4 KOM 250 KRV 250
VUTR 1200 WH ЕС SFK 700x423x27 G4 SFK 700x410x48 G4 KOM 315 KRV 315
VUTR 1500 WH ЕС SFK 800x477x27 G4 SFK 800x477x47 G4 USWK 1-6
VUTR 2000 WH ЕС KOM1 500x300 KR 500x300
Share your opinion

Please evaluate our updated site user friendliness