/ Product catalogue / Centralized air handling units / Rotary residential AHU / Vertical Units / VUTR 200 VK EC / VUTR 200 VEK EC L A21
| Unit of measurement | VUTR 200 VEK EC L A21 | |
| Connected air duct size | mm | 125 |
| Phases | - | 1 |
| Minimum supply voltage | V | 230 |
| Maximum supply voltage | V | 230 |
| Power supply frequency | Hz | 50 |
| Rated power | W | 171 |
| Power of electrical reheater | W | 700 |
| Unit current | A | 4.31 |
| Maximum airflow | m3/h | 270 |
| Sound pressure level LpA at 3 m | dB(A) | 33 |
| Heat recovery efficiency, max | % | 93 |
| Heat exchanger type | - | Rotary |
| Heat exchanger material | - | Aluminum |
| Weight | kg | 53 |
| Extract filter | - | G4 |
| Supply filter | - | G4 (F7 optional) |
| Transported air temperature (max) | °С | 40 |
| Transported air temperature (min) | °С | -25 |
| Ambient air temperature min | °С | 1 |
| Ambient air temperature max | °С | 40 |
| Ambient air humidity max | % | 60 |
| Ingress protection rating | - | IP22 |
| Ingress protection rating of the drive | - | IP44 |
| Trademark | Vents | |||||
| Model | VUTR 200 VEK EC L A21 | |||||
| Specific energy consumption (SEC) (kWh/(m2/a)) | Cold | Average | Warm | |||
| 85.6 | A+ | 41.1 | A | 15.6 | E | |
| Type of ventilation unit | Bidirectional | |||||
| Type of drive installed | Variable speed | |||||
| Type of heat recovery system | Regenerative | |||||
| Thermal efficiency of heat recovery (%) | 88 | |||||
| Maximum flow rate (m3/h) | 240 | |||||
| Electric power input (W) | 170 | |||||
| Reference flow rate (m3/s) | 0.047 | |||||
| Reference pressure difference (Pa) | 50 | |||||
| Specific power input (SPI) (W/(m3/h)) | 0.411 | |||||
| Control typology | Local demand control | |||||
| Maximum internal leakage rates (%) | 3.3 | |||||
| Maximum external leakage rates (%) | 2.7 | |||||
| Sound power level (dB(A)) | 45 | |||||
| Declared typology | RVU BVU | |||||
| The annual electricity consumption (AEC) (kWh/a) | Cold | Average | Warm | |||
| 217 | 869 | 217 | ||||
| The annual heating saved (AHS) (kWh/a) | Cold | Average | Warm | |||
| 9100 | 4652 | 2104 | ||||
| H | W | W1 | W2 | L | L1 |
|---|---|---|---|---|---|
| 746 | 596 | 408 | 173 | 326 | 338 |
| Name | Photo | Description |
|---|---|---|
| Vents A25 |
|
The control panel with a sensor display |
| Vents A22 |
|
The A22/A22 WiFi control panels are used for control of industrial and domestic air handling units with an A21 automation system. |
| Vents A22 WiFi |
|
The A22/A22 WiFi control panels are used for control of industrial and domestic air handling units with an A21 automation system. |
| Name | Photo | Description |
|---|---|---|
| Vents HR-S |
|
Electro-mechanical humidistats |
| Vents CO2-1 |
|
CO2 sensors |
| Name | Photo | Description |
|---|---|---|
| Vents SR 125/600 |
|
Silencer is applied for noise absorption produced during the ventilating equipment operation and spread along the ducting systems |
| Vents SR 125/900 |
|
Silencer is applied for noise absorption produced during the ventilating equipment operation and spread along the ducting systems |
| Vents SR 125/1200 |
|
Silencer is applied for noise absorption produced during the ventilating equipment operation and spread along the ducting systems |
| Name | Photo | Description |
|---|---|---|
| Vents KOM 125 |
|
Spring-loaded backdraft damper for round ducts |
| Vents KRV 125 |
|
Air damper for air flow cut-off in round air ducts |
| Name | Photo | Description |
|---|---|---|
| Vents Belimo TF230 |
|
The actuators are designed for controlling air dampers with cross section up to 0.4 m² performing protection functions |
