VENTS VUTR 280 V EC

• The VUTR V/VE EC air handling units  are the fully-featured ventilation units that ensure air filtration, fresh air supply and stale air extraction.
• During the operation process the extract air heat is transferred to the intake air through the rotary heat exchanger.
• The units are used in ventilation systems installed in various premises that require reasonable energy saving solutions and controllable ventilation systems.

• EC motors reduce energy demand by 1.5-3 times and ensure high performance and low noise operation.
• All models are designed for connection to ø125, 160 and 250 mm round air ducts.

• VUTR V EC models without a heater.

• VUTR VE EC models are equipped with an electric heater.

• Made of galvanized steel, internally filled with a mineral wool heat- and sound-insulating layer.

• The insulation thickness is 20 mm for the VUTR 200 V2/V2E EC models and 40 mm for the VUTR 280, 400 and 600 V/VE EC models.

• All units are equipped with a 5th spigot for connection of a kitchen hood (see the «Application option» section).
• The distinctive feature of the VUTR 200 V2/V2E EC unit is the ability to connect the KH-1 kitchen hood (available upon separate order) directly to the unit.

• The two integrated G4 and F7 filters ensure sufficient intake air purification.
• Extract air is cleaned by the integrated G4 filter.

• The units are equipped with high-efficient EC motors with an external rotor and a centrifugal impeller.
• These state-of-the-art motors offer the very best in energy efficiency today. 

• In addition to that, EC motors combine high performance and optimum control over the entire speed range. 
• The high efficiency (up to 90 %) is a definite advantage of EC motors.

Rotary heat exchanger operation principle

• The rotary heat exchanger is a short rotating cylinder filled with layers of corrugated aluminium tape packaged in a such way so as to enable free passage of the supply and extract air flows.
• As the cylinder rotates the aluminium tape contained in the heat exchanger is first exposed to the supply air stream and then to the extract air stream.
• As a result the material undergoes repeated warming and heating cycles thereby transferring heat and humidity from the warm air stream to the cold one.
• As compared to plate heat exchangers, the rotary heat exchangers are distinguished with no condensate forming, ability to maintain comfortable air humidity and extremely low freezing danger.

• The VUTR V(2)E EC units are equipped with an electric heater. 
• If heat recovery is not sufficient to reach the set supply air temperature, the heater is activated to warm up supply air.

• The heaters are equipped with protecting devices to ensure safe and reliable operation of the unit.

• The VUTR V(2)(E) EC 21 units are equipped with an integrated control system.
• The A21 controller allows integrating the unit into the Smart Home system or BMS (Building Management Systems).
• The remote control panel is not included in the delivery set (purchased separately).
• To control the unit using a mobile application via Wi-Fi, you need to download the VENTS AHU mobile application.
• The VUTR V/VE EC A17 units are equipped with a th-Tune control panel with an LCD display.
• The VUTR V/VE EC A18 units are equipped with a pGD1 control panel with an LCD display.

Functions	A21	A17	A18
Control via Wi-Fi using a mobile application	+	-	-
Control via a wired remote control panel	A22 (option)	А17	А18
Control via a wireless remote control panel	А22 Wi-Fi (option)	-	-
Control via a wired remote LCD control panel	А25 (option)	-	-
BMS	RS-485	option	option
	WI-FI	-	-
	Ethernet	-	-
	MODBUS (RTU, TCP)	option	option
Service Vents Cloud Server	+	-	-
Speed selection	+	+	+
Filter replacement indication	according to hour meter readings	according to hour meter readings	according to hour meter readings
Alarm indication	full alarm description in the mobile application	full alarm description on the control panel	full alarm description on the control panel
Week-scheduled operation	+	+	+
Timers	+	-	-
Boost mode	+	-	-
Kamin mode	+	-	-
Reheater connection	integrated in E models, external reaheater cannot be connected	integrated in E models, external reaheater cannot be connected	integrated in E models, external reaheater cannot be connected
Cooler connection	option	option	option
Kitchen hood connection	option	option	option
Minimum supply air temperature control	+	-	-
Humidity control	option	option	option
CO2 controller	option	option	option
VOC controller	option	option	option
Fire alarm sensor connection	option	option	option

*Option. The functionality is available when you purchase the appropriate accessory.

• The unit is designed for wall or floor mounting.
• The access for unit and filter maintenance is available from the front panel.

• The service and the back panels can be rearranged allowing connection both on the right and on the left side.