Series Vents iFan Wi-Fi

Vents iFan is an intellectual axial fan for exhaust ventilation with an integrated Wi-Fi module
  • Motor type: DC
  • Control: Smartphone
  • Impeller type: Axial
  • Humidity sensor: Built-in
  • Timer: Internal timer
  • Motion sensor
  • Integrated intellectual sensors adjust the unit's operation, allowing to create the most balanced microclimate.
  • Modern DC motor and an aerodynamic shape of the impeller ensure as low noise level as possible: just 17 dBA, meanwhile preserving high performance of the unit.
  • The fan features an extra thin casing: it is just 29 mm thick.
  • The range of colour options for the removable decorative panels will make your interior unique.

Ruby star

Black sapphire

Graphite

Melange

Silver

Purple topaz

DESIGN
  • Reliable motor on ball bearings with minimal power consumption.
  • The bearings are maintenance-free and are filled with grease for the whole motor service life.
  • The unit is powered through an integrated power supply unit with a broad voltage range of 100–240 V (50–60 Hz), so the unit can be applied in different countries and its operation remains stable under power fluctuations.
  • The motor is equipped with overheating protection.
  • The motor is installed on an antivibration connector to absorb vibrations and ensure low-noise operation of the unit.



Removable spigots allow the unit to be mounted with Ø 100 mm or Ø 125 mm air ducts.
The motor unit and the impeller can be easily removed with no special tools necessary for comfortable maintenance.
MODIFICATIONS



The basic model with intellectual humidity control.
The model with intellectual humidity control and additional motion sensor-based control.
CONTROLING THE VENTS IFAN WI-FI UNIT

The unit is controlled via the smartphone app, where you can set up the fan's mode-based or sensor-based operation.

Operation modes

  Silent

The unit operates in silent mode, which is on when the motion sensor is triggered or the external switch is on. It allows to adjust the speed ranging from 30% to 100% of the fan's maximum performance.

  Max

The unit operates at a high speed. This mode is on when the humidity sensor or temperature sensor is triggered, or when Boost mode is enabled via the smartphone app.

  24 HOURS MODE

The unit operates in a low-speed mode to ensure minimum, but permanent ventilation. If a heat / humidity / motion sensor is triggered or the external switch is on, the fan switches either to Silent mode or to Max mode.

  Interval ventilation

This function is only available when the 24 hours mode is off. This mode allows to ventilate the room for 30 minutes every 12 hours at a preset speed.


Sensors

  HUMIDITY SENSOR / Humidity control setup

The fan is equipped with an intellectual humidity sensor that has the following operating modes:

Manual mode allows to set a threshold for the humidity sensor to be triggered, ranging from 40% to 80%. If it is exceeded, the fan will turn on or switch to a higher speed.

Auto mode enables intellectual humidity control. This mode suggests automatic humidity threshold change and fan speed selection. The unit auntonomously selects an optimal humidity threshold for the room it is installed in. The algorithm selection is determined by analyzing the indoor humidity level statistics.

Temperature sensor. If the preset temperature threshold is exceeded, the fan will switch to the Max speed and will keep operating in this mode until the indoor temperature reaches 4°C below the preset threshold. Afterward, the fan will switch back to the previous mode.

  MOTION SENSOR (for Vents IFan Move Wi-Fi models)

If the motion sensor is triggered, the tur-on delay timer starts. Then, the fan switches to the Silent mode. When motion is no longer detected by the sensor after the turn-off delay timer runs out, the fan switches to standby mode.

  TIMER / Turn-on and turn-off delay timers

The turn-on delay timer allows to postpone the transition to a higher speed by 2 to 5 minutes if sensors are triggered.

The turn-off delay timer prolongs the fan's operation by 5, 15, 30 or 60 minutes in the mode suggested by the triggered sensor or the activated Boost mode.

Lineup Vents iFan Wi-Fi Connected air duct size, mm Rated power, W Maximum airflow, m3/h Sound pressure level LpA at 3 m, dB(A) Humidity sensor Timer Motion sensor
100
125
6 133 32
100
125
6 133 32
Datasheet
"VENTS iFan Wi-Fi" product description 05-2022
1.31 Mb
Manual
"VENTS iFan Wi-Fi" connection guide 02-2020 (V168-1EN-01)
860 Kb
Manual
"VENTS iFan Wi-Fi" user's manual 10-2023 (V168EN-03)
2.22 Mb
Image
iFan Wi-Fi - image 1
511 Kb