Axial fan VENTS OVK1 series

Print version Save in PDF format

Low pressure axial fans in the steel casing for wall mounting. Air flow: 1700 m³/h for 50 Hz; 1650 m³/h for 60 Hz.

Model features

Series of products

ВЕНТС OVK1 150

ВЕНТС OVK1 200

ВЕНТС OVK1 250

ВЕНТС OVK1 315

Description

APPLICATIONS
Combined supply and extract ventilation systems for various premises where high air flow at relatively low system resistance is required.	OVK1 fans can be used for the direct exhaust of air. OVK1 fans can be mounted onto the external walls.
DESIGN
OVK1 fan casings are made of steel with polymeric coating.	The terminal box is fitted with a cord for remote connection.
MOTOR
Single-phase asynchronous motor is equipped with thermal overheating protection with automatic restart.	The motor is equipped with slide bearings. Motor rating protection IP 24.
SPEED CONTROL
Both smooth and step speed control is performed with the thyristor or autotransformer controller.	Several fans can be connected to one controller in case the total power and operating current do not exceed the rated controller values.
MOUNTING
The fan is installed on the wall surface by means of round mounting plate. The fan is powered through the remote terminal box.	Power supply and installation shall be performed in compliance with the manual and wiring diagram on the terminal box.

Modifications

Modification name

OVK 1 150

OVK1 200

OVK1 250

OVK1 315

Capacity diagram

Operating point

Downloads

Name

Download

Show

User's manual "VENTS OV,OVK,OV1,OV1 R,OVK1,VKF,VKOM,OVP" (pdf 4.85Mb)

Brochure "VENTS OV1, OVK1, VKOM" (pdf 2.74Mb)

Download high quality image "VENTS OVK1" (psd 2.3Mb)

Download image "VENTS OVK1" for your website (png 850.73Kb)

DESIGNATION KEY

Series and modification	Dimension-type
VENTS OVK1: round mounting plate	150: branch pipe ø 162 mm 200: branch pipe ø 208 mm 250: branch pipe ø 262 mm 315: branch pipe ø 312/315 mm

Accessories