The wall-mounted ventilator is an air supply unit for permanent ventilation and is intended for supplying both residential and non-residential premises with fresh air
The wall-mounted ventilator is an air supply unit for permanent ventilation and is intended for
supplying both residential and non-residential premises with fresh air.
The PSS ventilator is a costeffective
and stand-alone unit for more intensive air exchange compared to passive ventilators.
The ventilator allows you to fill a room with fresh air without opening windows and without letting
dust, street noise and plant pollen into the room.
The specially designed internal grille, as well as the
device for regulating the flow cross section, ensure a uniform supply and distribution of fresh air in
the room.
The ventilator is installed on the sunny side of the outer wall of an apartment, cottage, office
building, etc.
In the updated version of the ventilator, the outer hood is more advanced in design.
The hood is made of 100% UV-resistant ASA plastic (ABS plastic in previous versions).
FEATURES
Designed for ventilation of small and medium-sized premises.
The solar battery provides more intensive air exchange than with
conventional passive ventilation.
Energy efficient due to the use of solar energy.
Operational independence. The motor is powered by a solar battery.
The motor supply voltage is 9...18 V. The electrical parameters of the battery
vary according to the intensity of the solar flux. The intermediate parameters
are shown in the table.
At night, the ventilator functions as a passive ventilation element.
Manual adjustment of the airflow section is possible.
STRUCTURAL ELEMENTS
The ventilator consists of two ventilation grilles (internal with built-in fan and external) and a telescopic air duct.
Internal grille
Telescopic air duct
External grille
The internal grille is made of high quality ABS plastic and is equipped with a dust filter (G3 class). The built-in regulator allows you to change the supply air
volume
or completely close the ventilation duct.
Telescopic PVC air duct with adjustable length.
The external grille (ventilation hood) is made of high-quality UV-resistant ASA plastic (ABS plastic in previous versions). A solar panel is attached to the surface of
the hood to power the motor.
Voltage [V]
Current [A]
Impeller RPM [min-1]
Air flow [m3/h]
9
0.064
1390
13
12
0.073
1754
15
15
0.083
2140
17
18
0.092
2490
20
AIR FLOW DISTRIBUTION
The design of the internal grille and the device for regulating the flow cross section ensure a uniform supply and distribution of fresh air in the room.
You can adjust
the air intake intensity smoothly as required.
Vents PSS 102
