Login

Privacy Policy (GDPR)
Authorization
Not registered yet? Take advantages of registration:
Products saving in a binding to the projects
Product consultation from our experts - Online
Registration
Signup
By using this form, you confirm that you have read the site terms of use Terms of use and completely accept the terms of use

VENTS Reversible heat and energy recovery ventilator SOLO

VENTS Reversible heat and energy recovery ventilator SOLO
The Solo ventilator is the most suitable solution for utility rooms, closets, and cloakrooms. Low power consumption will save electricity by providing clean and fresh air to any room with the area of up to 15 m².
Model features
  • Inflow mode
  • Extract mode
  • ЕС-Motor
  • Description
  • Modifications
  • Downloads
  • Certificates
Description
Description
APPLICATION  
  • Supply clean fresh air to the premises
  • Remove stale extract air from the premise
  • Clean the air of dust and insects
  • Prevent penetration of excessive humidity and appearance of mould
  • Protect against outdoor noise
  • Recover heat and provide humidity balance inside
  • Reduce the heating costs in winter and air conditioning costs in summer
  • Low energy demand
OPERATING LOGIC  
  • Energy is recovered due to reversing operation of the ventilator, which consists of two cycles:

CYCLE I. As warm stale extract air flows through the ceramic heat exchanger, it heats up and moisturizes the heat exchanger. In 70 seconds
as the ceramic heat exchanger gets warmed the ventilator automatically switches to Air Supply mode.

CYCLE II. Fresh, cold intake air from outside flows through the ceramic heat exchanger, absorbs accumulated moisture and is heated to the room temperature. In 70 seconds as the heat exchanger gets cooled down, the ventilator switches to Air Extract mode and the cycle is renewed.

  • The Air Supply and the Air Extract modes are switched every 70 seconds.
DESIGN  
  • Fan

Air is supplied or extracted by a reversible axial fan with EC motor. Due to EC technology the fan is distinguished with low energy demand.
The motor has overheating protection and ball bearings for longer service life.

  • Air filters

Two built-in filters with total filter class G3 are used to clean supply and extract air flows. The filters ensure fresh air cleaning of dust and insects and prevent the ventilator parts from soiling. The filters are cleaned either with a vacuum cleaner or flushed with water.

  • Energy heat exchanger

The high-technology energy heat exchanger is used for extract air heat energy recovery and supply air heating.

The Solo RA1-35-9 R is equipped with the ceramic energy heat exchanger with recovery efficiency up to 85 %.

CONTROL
MOUNTING EXAMPLE
Modifications
+
+
Downloads
Downloads
Select document type
  • Advertising and printing products
  • Certificates
  • Technical documentation
Name
Сatalogue "Single-room energy recovery units TwinFresh" (pdf 26.7Mb)
Download image "VENTS SOLO" for your website (png 151.9Kb)
Download high quality image "VENTS SOLO" (psd 1.23Mb)
"Reversible heat and energy recovery ventilator SOLO" product description 06-2018 (pdf 786.57Kb)
"VENTS SOLO" user's manual 02-2021 (V132EN-08) (pdf 2Mb)
Certificates
Certificates
<p>
	Mark of conformity to the European Quality Standards and Electrical Safety issued by Association for Technical Inspection (Technischer Überwachungsverein, Germany).</p>

Mark of conformity to the European Quality Standards and Electrical Safety issued by Association for Technical Inspection (Technischer Überwachungsverein, Germany).

<p>
	CE mark means that the equipment is produced in compliance with the quality and safety standards provided by EU regulations for the given product type (marked by manufacturer).</p>

CE mark means that the equipment is produced in compliance with the quality and safety standards provided by EU regulations for the given product type (marked by manufacturer).

<p>
	Mark of conformity to the Ukrainian Quality Standards and electrical safety issued by UkrTEST.</p>

Mark of conformity to the Ukrainian Quality Standards and electrical safety issued by UkrTEST.

<p>
	Mark of conformity of the goods subject to obligatory certification in DSTR system as well as technical norms and standards acting in Russian Federation. Confirmed by the RosTEST certificates (Moscow). </p>

Mark of conformity of the goods subject to obligatory certification in DSTR system as well as technical norms and standards acting in Russian Federation. Confirmed by the RosTEST certificates (Moscow).

<p>
	Insulation class: double insulation.</p>

Insulation class: double insulation.

<p>
	Applicance protection class.</p>

Applicance protection class.

Share your opinion

Questionnaire
Basic parameter for domestic fan selection