Login

Privacy Policy (GDPR)
Authorization
Not registered yet? Take advantages of registration:
Products saving in a binding to the projects
Product consultation from our experts - Online
Registration
Signup
By using this form, you confirm that you have read the site terms of use Terms of use and completely accept the terms of use

Sound-insulated fan VENTS Stream series

Sound-insulated fan VENTS Stream series
Inline mixed-flow fans in sound- and heat-insulated casing with the air flow up to 540 m3/h.
Model features
  • Noise isolation
  • Inline fan
  • For round ducts
  • Description
  • Modifications
  • Downloads
  • Designation key
Description
Description
APPLICATION
  • VENTS Stream series of duct fans in a special sound-insulated casing, which ensures silent operation of the fan with high aerodynamic characteristics.
  • Compatible with air ducts with a diameter of 100 to 160 mm.
  • VENTS Stream fans combine the wide capabilities and high performance characteristics of axial and centrifugal fans, providing a powerful air flow and high pressure.
  • They are used in supply and exhaust ventilation systems of various commercial and industrial premises with increased noise level requirements (libraries, conference rooms, educational institutions, kindergartens, etc.).
DESIGN
  • The casing and impeller are made of high quality and durable plastic.
  • The internal perforation of the casing allows sound waves to pass through, directing them at a certain angle to a layer of sound-absorbing material.
  • The casing is internally heat- and sound-insulated with a 50 mm mineral wool layer.
  • The special perforation of the casing and the sound-absorbing material ensure sound attenuation in a wide frequency range.
  • Due to the conical shape of the impeller and specially shaped blades, the circular speed of the air flow is increased, providing higher pressure and performance compared to standard axial fans.
  • The diffuser, the specially profiled impeller and the directing vanes at the outlet of the fan casing distribute the air flow in such a way as to attain the best combination of high performance and high pressure at low noise level.
  • The fan casing is equipped with an external sealed terminal box for connection to power mains.
ELECTRIC MOTOR
  • Single-phase energy efficient three-speed motors with low energy demand are used.
  • The fan motors are equipped with thermal fuses for overload protection.
  • The ball bearings provide a long service life (about 40 000 hours of continuous operation).
  • The motor protection class is IPX4.
SPEED CONTROL
  • The three-speed motor can be controlled using a built-in switch (option "V") or an external switch for multi-speed fans (purchased separately).
  • A built-in speed controller (option "P"), an external TRIAC or autotransformer speed controller (available upon separate order) enable smooth motor speed control when connected to the maximum speed terminal.
  • The models with the "T" option are equipped with a turn-off delay timer, adjustable from 2 to 30 minutes.
Vents Stream fan with additional options
MOUNTING
  • The fans can be installed at the beginning, in the middle or at the end of the duct system.
  • Mounting at any angle relative to the fan axis is allowed.
  • In one system, it is possible to install several fans in parallel to increase the air flow or in series to increase the operating pressure.
  • The fan casing is equipped with mounting brackets for floor, wall or ceiling mounting.
FAN WITH ELECTRONIC TEMPERATURE AND SPEED CONTROL MODULE (U OPTION).
  • The ideal solution for ventilation of premises with high demands to permanent temperature control e.g. greenhouses.
  • A fan with an electronic temperature and speed module provides automatic control of impeller rotation speed (air flow) depending on the air temperature in the air duct or in the room.
The front panel of the electronic module has the following control knobs:  
  • controller for impeller speed presetting
  • electronic thermostat operation threshold controller
  • thermostat operation indicator
There are two versions:  
  • with a temperature sensor built into the fan duct (option "U");
  • with a remote temperature sensor fixed on a 4 m cable (option "Un").
FAN OPERATION ALGORITHM WITH ELECTRONIC TEMPERATURE AND SPEED CONTROL MODULE
  • Set the desired air temperature (thermostat threshold) by turning the thermostat control knob and the minimum rotation speed (air flow) by turning the speed control knob.
  • If the temperature rises and exceeds the set thermostat threshold, the automation switches the fan to the maximum rotation speed (maximum air flow).
  • When the air temperature drops below the set thermostat threshold, the automation switches the fan motor to the previously set rotation speed.
  • To prevent frequent switching of motor speeds in case when the temperature in the air duct is equal to the set temperature threshold, a speed switching delay has been introduced into the algorithm.
  • When the air temperature exceeds the set thermostat threshold by 2 °C, the fan switches to an increased speed.
  • The fan switches to the set (reduced) speed after the temperature drops below the set temperature threshold.
  • This algorithm is used to maintain the air temperature with an accuracy of 2 °C.
  • Fan speed changes are infrequent.
Modifications
Modification name
+
+
Downloads
Downloads
Select document type
  • Advertising and printing products
  • Certificates
  • Technical documentation
Name
"VENTS Stream (EC)" user's manual 10-2022 (V238EN-03) (pdf 3.2Mb)
"VENTS Stream" product description 02-2022 (pdf 952.09Kb)
Download high quality image "VENTS Stream (ErP 2018)" (psd 3.56Mb)
Download image "VENTS Stream (ErP 2018)" for your website (png 200.87Kb)
Designation key
Designation key
Series Air duct diameter Options
VENTS Stream 100; 125; 150; 160 T: adjustable turn-off delay timer, from 2 to 30 min.
U: speed controller with an electronic thermostat and a temperature sensor built into the air duct. Temperature-based operation logic.
Un: speed controller with an electronic thermostat and a temperature sensor, fixed on a 4 m cable. Temperature-based operation logic.
R: power cord with a mains plug.
V: three-position speed switch.
P: integrated smooth speed controller.
Share your opinion

Questionnaire
Basic parameter for domestic fan selection