Series Vents Uni Max

Name: Vents Uni Max
Brand: VENTS
Availability: InStock

Wall-mounted AHU with an enthalpy heat exchanger and an air flow of up to 200 m³/h

Heat exchanger type: Plate counterflow
Heat exchanger material: Profiled polystyrene plates
Sound-insulated casing
Bypass: Auto
BMS protocol: ModBus
Casing material: Galvanized steel
Humidity sensor: Optional
CO2 sensor: Optional

FEATURES

Efficient decentralized ventilation unit for small offices or conference rooms.
Visible ceiling suspended installation.
A version with electrical preheater is available for cold climate.
Clean air due to the use of an ePM1 70% / F7 filter for supply air filtration.

Possibility to connect fresh air inlet and exhaust air ducts at top or back side of the unit.
Low noise operation from 16 dB(A) at 3m.
High level of comfort due to builtin bypass and air dampers.

CASING

The casing is made of galvanized sheet metal with white painted decorative cover. The contemporary design of the Uni Max unit will seamlessly blend into any interior. The unit is heat- and sound-insulated with a 20 mm layer of foam. The service panel is easy to open for filter maintenance. The unit is equipped with two Ø125 mm spigots for fresh air intake and stale air exhaust. The position of the spigots can be changed from horizontal to vertical.

FANS

The units use electronically commutated (EC) motors with external rotors and forward-curved impellers. In addition to that, EC motors combine high performance and optimum control over the entire speed range. EC motors have an excellent power efficiency (up to 90 %).

AIR DAMPERS

The Uni Max unit is equipped with two automatic air dampers, which close automatically when the unit is off to prevent drafts.

PREHEATING

The Uni Max E S21 units are equipped with an electrical preheater to prevent heat exchanger freezing in the cold climate.

BYPASS

The Uni Max units are equipped with a bypass for summer cooling by the cool air from outside.

HEAT RECOVERY

The Uni Max unit is equipped with a plate counter-flow polystyrene heat exchanger for heat recovery. The unit condensate is collected and drained to the drain pan under the heat exchanger.

AIR DISTRIBUTION

CONTROL AND AUTOMATION

The Uni Max А21 units are equipped with an integrated automation system. The remote control panel is not included in the delivery set (sold separately).
The А21 controller allows integrating the unit into the Smart Home system or BMS (Building Management System). Unit control via Wi-Fi using the mobile application Vents AHU.
The Uni Max А14 units are equipped with an integrated automation system and the А14 wall mounted sensor control panel with LED-indication.