Privacy Policy (GDPR)
Not registered yet? Take advantages of registration:
Products saving in a binding to the projects
Product consultation from our experts - Online
By using this form, you confirm that you have read the site terms of use Terms of use and completely accept the terms of use

VENTS VUT H air handling units with heat recovery

VENTS VUT H air handling units with heat recovery
Air handling units with the air capacity up to 2200 m³/h and the heat recovery efficiency up to 88% in the compact sound- and heat-insulated casing.
Model features
  • Noise isolation
  • Air handling units with heat recovery
  • Ball bearings
  • Description
  • Modifications
  • Downloads
  • Legend
  • Air handling unit VUT H is a complete ventilation units designed for air filtration and supply to the premises and exhaust air removal.

  • During the operation process the extract air heat is transferred to the supply air through the plate heat exchanger.

  • All the models are designed for connection with Ø 125, 150, 160, 200, 250, 315 mm round ducts.

  • The casing is made of aluminium profile, double skinned with 20 mm mineral wool heat-and sound-insulating layer.

  • Two incorporated G4 panel filters for extract air ventilation and F7 filters for supply air ventilation are supplied with the unit.

  • The unit is equipped with supply and exhaust centrifugal double-inlet fans with forward curved blades and built-in thermal overheating protection with automatic restart.

  • The electric motors and impellers are dynamically balanced in two planes.
  • The ball-bearings used with motors are designed for at least 40 000 hours operation and are maintenance-free.
  • The cross-flow air-to-air heat exchanger block is manufactured from aluminum plates.

  • Whenever heat recovery is not required the heat exchanger block can be easily replaced by a “summer” block.

  • The unit is also equipped with the drain pan for condensate water drainage as well as built-in freezing protection system. Its operating principle is based on switching the supply fan off as the temperature sensor requires. Warm extract air heats the heat exchanger. Then the supply fan switches on and the unit continues operating under rated conditions.
  • The motor speed is controlled by means of 4-step control switch by means of selecting the minimum, average or maximum speed or the unit shutdown.

Offered options to the units
Type G4 replaceable filter F7 replaceable filter Summer block
VUT 350 H SF VUT 350-600 H G4 СФ ВУТ 350-600 Г F7 VL VUT 350 H
VUT 500 H VL VUT 500-600 H
VUT 530 H VL VUT 500-600 H
VUT 600 H VL VUT 500-600 H
VUT 1000 H SF VUT 1000 H G4 SF VUT 1000 H F7 VL VUT 1000 H
VUT 2000 H SF VUT 2000 H G4 SF VUT 2000 H F7 VL VUT 2000 H
  • Air handling unit is mounted on the floor and suspended to the ceiling by means of a seat angle with anti-vibration mounts or attached to a wall with brackets.

  • The unit can be mounted either in service spaces or in main premises above the suspended ceiling, in the pocket or can be placed directly in the room.

  • Mounting in any position shall provide correct condensate drainage.

  • Access for the fan maintenance and filter cleaning shall be provided from outside of the side panels.

VENTS VUT H unit air exchange example in the flat
Certificate LVD "VUT H" (pdf 225.03Kb)
Certificate CB Test Report "VUT H" (pdf 11.93Mb)
Certificate GS "VUT H" (pdf 224.05Kb)
Brochure "VENTS VUT H" (pdf 258.76Kb)
Download high quality image "VENTS VUT H (ErP 2016)" (psd 4.38Mb)
User's manual "VENTS VUT H" (pdf 2.13Mb)
Declaration of сonformity "VUT H" (pdf 1.57Mb)
Download image "VENTS VUT H (ErP 2016)" for your website (png 371.07Kb)
Series   Rated air capacity, m3/h   Duct connection
VENTS VUT   350; 500; 530; 600; 1000; 2000   H - horizontal
Share your opinion
I found this page useful to select the required products easy and quick
No difficulties with the site use. Everything is logical ad clear
The site produced a nice impression

Basic parameter for domestic fan selection