Login

Privacy Policy (GDPR)
Authorization
Not registered yet? Take advantages of registration:
Products saving in a binding to the projects
Product consultation from our experts - Online
Registration
Signup
By using this form, you confirm that you have read the site terms of use Terms of use and completely accept the terms of use

VENTS VUT/VUE 180 P5 air handling units with heat recovery

VENTS VUT/VUE 180 P5 air handling units with heat recovery
Heat recovery air handling units in sound- and heat-insulated casings. Air flow up to 220 m³/h. Heat recovery efficiency up to 98 %.
Model features
  • Noise isolation
  • For round ducts
  • Air handling units with heat recovery
  • Description
  • Modifications
  • Capacity diagram
  • Downloads
  • Designation key
  • Accessories
Description
Description
DESCRIPTION  
  • The air handling units are the fully featured ventilation units with heat recovery for air filtration, fresh air supply and stale air extract.
  • The extract air heat is used for warming up of the supply air stream in the high-efficient plate heat exchanger.
  • The units offer energy-efficient ventilation for cottages and flats and are compatible with round Ø 150 mm air ducts.
FILTER CASING
  • The built-in G4 supply filter and G4 extract filter provide air filtration.
  • A F7 supply filter (specially ordered accessory) may be used for efficient supply air filtration.
  • The casing is made of expanded polypropylene (EPP) possessing high heat- and sound-insulating properties.
FANS  
  • Single-phase three-speed external rotor motors with centrifugal impellers and forward curved blades.
  • The motors have overheating protection with automatic restart.
HEAT EXCHANGER  
  • The VUT 180 P5 units are equipped with a counterflow polystyrene heat exchanger.
  • In the cold season the extract air heat is transferred to the intake air stream which reduces ventilation-generated heat losses.
  • This can lead to formation of condensate that is collected in a special drain pan and discharged into the sewage system.
  • In the warm season the outside air heat is transferred to the exhaust air stream.
  • This allows for a considerable reduction of the supply air temperature which, in its turn, reduces the air conditioning load.

 

  • The VUE 180 P5 units are equipped with a counterflow heat exchanger with an enthalpy membrane at the core.
  • In the cold season the extract air heat and moisture are transferred to the supply air stream through the enthalpy membrane.
  • Heat recovery minimises heat losses from ventilation.
  • In the warm season the outdoor air heat and moisture are transferred to the exhaust air stream through the enthalpy membrane.
  • This enables considerable reduction of the supply air temperature and humidity which, in its turn, reduces the air conditioning load.

CONTROL AND AUTOMATION  
  • The unit is equipped with integrated control system.
  • It can be supplied either with the mechanical threespeed speed controller P3-1-300 or the sensor threespeed speed controller SP3-1, power cable with Europlug XP mains plug.
  • The service side of the unit has a removable inspection door with hand screws to enable heat exchanger and filter cleaning and replacement.
  • The control unit is located inside of the unit casing.
  • The power cable and the ground cable are connected to the control unit via the cable glands on the side on the unit.
P3-1-300      SP3-1
FREEZE PROTECTION INSTALLATION
  • The freeze protection is realized by means of shutdown the supply fan as follows: in case of freezing danger communicated by the temperature sensor the supply fan is turned off to let the heat exchanger defrosting with the extract air heat.
  • After freezing danger is no longer imminent, the unit reverts to the standard operation mode.
  • The unit is designed for suspended ceiling, wall horizontal or vertical installation using the fixing brackets.
  • The mounting position of the unit must provide service access for maintenance and repair
UNIT DESIGN  
APPLICATION OPTIONS  
Modifications
Modification name
+
+
Capacity diagram
Capacity diagram
  • Selection method:
  • Air flow:
  • Pressure:
Operating point
  • Air flow: --
  • Pressure: ---
Downloads
Downloads
Name
Brochure "VENTS VUT/VUE 180 P5" (pdf 2.02Mb)
User's manual "VENTS VUT/VUE 180 P5" (pdf 2.51Mb)
Download high quality image "VENTS VUT/VUE 180 P5 (ErP 2015, 2016)" (psd 3.75Mb)
Download image "VENTS VUT/VUE 180 P5 (ErP 2015, 2016)" for your website (png 263.25Kb)
Designation key
Designation key
Series Rated air flow [m³/h] Mounting type Casing design Control
VUT: ventilation with heat recovery
VUE: ventilation with energy recovery
180 P: suspended 5: expanded polypropylene А3P3-1-300 speed controller
А4SP3-1 speed controller
Accessories
Accessories
Model G4 panel supply filter F7 panel supply filter
VUT 180 P5 SF 214 x 186 х 18 G4 SF 214 x 186 x 48 F7
VUE 180 P5
Share your opinion
I found this page useful to select the required products easy and quick
No difficulties with the site use. Everything is logical ad clear
The site produced a nice impression

Questionnaire
Where have you learned about us?