This new website is under development. You are welcome to send us your feedback regarding possible errors or troubles!
Login

Privacy Policy (GDPR)
Authorization
Not registered yet? Take advantages of registration:
Products saving in a binding to the projects
Product consultation from our experts - Online
Registration
Signup
By using this form, you confirm that you have read the site terms of use Terms of use and completely accept the terms of use

VUT/VUE 180 P5B EC air handling units with heat recovery

VUT/VUE 180 P5B EC air handling units with heat recovery
Air handling units in heat- and sound-insulated casing. Air flow up to 220 m³/h. Heat recovery efficiency up to 98 %.
Model features
  • Multiple modes
  • ЕС-Motor
  • Air handling units with heat recovery
  • Description
  • Modifications
  • Capacity diagram
  • Downloads
  • Designation key
  • Accessories
Description
Description
DESCRIPTION  
  • The air handling units are the fully featured ventilation units with heat recovery for air filtration, fresh air supply and stale air extract.
  • During operation the extract air heat is transferred to the supply air stream by the highly efficient plate heat exchanger.
  • The units are designed for energy efficient ventilation of cottages and flats and are compatible with round air ducts (Ø 150 mm).
FILTER CASING
  • Two built-in filters with filtration class G4 and F7 provide efficient supply air filtration.
  • Extract air is cleaned by the integrated G4 filter.
  • The casing is made of expanded polypropylene (EPP) with high heat and sound insulation characteristics.
MOTOR  
  • The units are equipped with high-efficient EC motors with an external rotor and a centrifugal impeller with forward curved blades.
  • These state-of-the-art motors offer the very best in energy efficiency today.
  • EC motors are characterised with high performance and optimum control across the entire speed range.
  • In addition to that, the efficiency of the electronically commutated motor reaches very impressive levels of up to 90 %.
HEAT EXCHANGER  
  • The VUT 180 P5B EC units are equipped with a counter-flow polystyrene heat exchanger.
  • In the cold season the extract air heat is captured and transferred to the supply air stream which reduces the ventilation-generated heat losses. 
  • This can lead to formation of condensate that is collected in a special drain pan and discharged into the sewage system.
  • In the warm season the ambient air heat is transferred to the exhaust air stream.
  • This allows for a considerable reduction of the supply air temperature which, in turn, reduces the air conditioning load.

  • The VUE 180 P5B EC units are equipped with a counter-flow heat exchanger with an enthalpy membrane at the core.
  • In the cold season the extract air heat and moisture are transferred to the supply air stream through the enthalpy membrane reducing the heat losses from ventilation.
  • Consequently, it is the ambient air heat and moisture transferred to the exhaust air stream through the enthalpy membrane in the warm season.
  • This allows for a considerable reduction of the supply air temperature and humidity which, in turn, reduces the air conditioning load.

BYPASS  
  • The units are equipped with a bypass for summer ventilation (cooling of the premise with a cool outside air).
CONTROL AND AUTOMATION  
  • The VUT/VUE 180 P5B EC units are equipped with an A14 automation.
  • The VUT/VUE 180 P5B EC A14 models have the A14 sensor control panel with LED indication.

Functions А14
Control functions  
Switching the unit on and off +
Low, Medium or High speed selection +
Filter maintenance indicator +
Emergency indicator +
Bypass control manual
Speed setting from 0 to 100% +
Built-in humidity sensor option
Normally open contacts for a kitchen hood, a humidity sensor and a CO2 sensor +
Normally closed contacts for a fire alarm panel +
Air damper contacts +
FREEZE PROTECTION INSTALLATION
  • Supply fan stopping. The heat exchanger freeze protection operates as follows: in case of freezing danger determined by the temperature sensor the supply fan is turned off to let extract air warm up the heat exchanger. After freezing danger is no longer imminent, the unit reverts to the standard operation mode.
  • The unit is designed for suspended ceiling, wall horizontal or vertical mounting using mounting brackets.
  • While installing the unit, ensure convenient ac-cess for subsequent maintenance and repair.
UNIT DESIGN  
APPLICATION OPTIONS  
Modifications
Modification name
+
+
Capacity diagram
Capacity diagram
  • Selection method:
  • Air flow:
  • Pressure:
Operating point
  • Air flow: --
  • Pressure: ---
Downloads
Downloads
Name
Software "Setting air handling units with automation A14 and A15" (rar 17.47Mb)
Brochure "VENTS VUT/VUE 180 P5B EC" (pdf 2.9Mb)
User's manual "VENTS VUT/VUE 180 P5B EC A14" (pdf 2.45Mb)
Download high quality image "VENTS VUT/VUE 180 P5B EC (ErP 2015, 2016, 2018)" (psd 3.74Mb)
Download image "VENTS VUT/VUE 180 P5B EC (ErP 2015, 2016, 2018)" for your website (png 320.51Kb)
Designation key
Designation key
Series Rated air flow [m3/h] Installation type Casing design Bypass Motor type Control
VUT: ventilation with heat recovery;
VUE: ventilation with energy recovery;
180 P: supended 5: expanded polypropylene B: bypass ЕС: synchronous electronically commutated motor А14: sensor control panel with LED indication
Accessories
Accessories
Model G4 supply panel filter F7 supply panel filter Built-in humidity sensor Outdoor CO2 sensor with indication Outdoor CO2 sensor Outdoor humidity sensor U-trap kit Air damper Electric actuator
VUT 180 P5B EC A14 SF186x214x18 SF SF186x214x18 F7 HV2 CO2-1 CO2-2 HR-S SH-32 KRV 150 LF230
VUE 180 P5B EC A14
Share your opinion
I found this page useful to select the required products easy and quick
No difficulties with the site use. Everything is logical ad clear
The site produced a nice impression

Questionnaire
Where have you learned about us?