Privacy Policy (GDPR)
Not registered yet? Take advantages of registration:
Products saving in a binding to the projects
Product consultation from our experts - Online
By using this form, you confirm that you have read the site terms of use Terms of use and completely accept the terms of use

VENTS VUT/VUE 250 H mini air handling units with heat recovery

VENTS VUT/VUE 250 H mini air handling units with heat recovery
Air handling units in compact sound- and heat-insulated casing with horizontal duct connections. Maximum air flow – 260 m³/h.
Model features
  • Multiple modes
  • Noise isolation
  • Air handling units with heat recovery
  • Description
  • Modifications
  • Capacity diagram
  • Downloads
  • Designation key
  • Accessories
  • The VUT/VUE 250 H mini A12 air handling units are the fully-featured ventilation units that ensure air filtration, fresh air supply and stale air extract.
  • During the operation process the extract air heat is transferred to the supply air through the plate heat exchanger.
  • All models are designed for connection to Ø 125 mm round air ducts.
  • VUT 250 H mini A12: models with horizontal duct connections, fans with AC motors with polystyrene heat exchanger.
  • VUE 250 H mini A12: models with horizontal duct connections, fans with AC motors with a heat exchanger made of enthalpy.
  • The casing of the VUT/VUE 250 H mini unit is made of aluzinc steel, internally filled with 20 mm mineral wool heat- and sound-insulating layer.
  • The casing of the VUT/VUE 250 H mini unit is made of high-quality polymer coated white steel.
  • Two built-in filters with filtering class G4 provide efficient supply and extract air filtration.
  • F8 filter is available as an option for supply air filtration.
  • The unit is equipped with a supply and exhaust centrifugal fan with backward curved blades and integrated overheating protection thermostat with automatic restart.
  • The motors and the impellers are dynamically balanced.
  • VUE mini: plate heat exchanger made of enthalpy with heat recovery efficiency up to 78 %.
  • The applied heat exchanger enables not only heat but also humidity recovery, which helps maintaining a comfortable humidity level.
  • In warm seasons the heat exchanger operates to cool down and dehumidify the supply air.
  • In cold seasons the heat exchanger operates to warm up supply air and humidify it.
  • VUT mini: plate heat exchanger made of polystyrene.
  • Whenever heat recovery is not required for unit operation, the heat exchanger block can be easily replaced by a summer block.
  • The unit is equipped with a drain pan for condensate drainage and removal as well as with a built-in frost protecting system.
  • The heat from the warm extract air is transferred to the cold supply air during operation of the heat exchanger in winter time.
  • Some condensate may form during extract air heat energy extraction.
  • If the temperature of the intake air is below -5 °C, the condensate can get frozen.
  • To prevent the heat exchanger freezing, electronic protection system is applied.
  • It switches the supply fan off as the temperature sensor requires.
  • Warm extract air defrosts the heat exchanger, then the supply fan switches on and the unit returns to normal operation.
  • The unit is equipped with the А12 (SRS-1).
  • Speed and rotation control of the single-phase power-controlled motors allows turning the unit on/off and controlling its capacity.
  • Several fans can be controlled synchronously in case their total current does not exceed the maximum permissible values for the controller current.
  • Mounting to wall, floor or ceiling with fixing brackets.
  • While mounting provide free access to the service panel for filter replacement and servicing.
  • The correct mounted unit must provide condensate collecting and drainage.
  • Universal casing design provides either left-handed or right-handed unit installation.
  • It requires reversing of the front and the back panels.
Modification name
Capacity diagram
Capacity diagram
  • Selection method:
  • Air flow:
  • Pressure:
Operating point
  • Air flow: --
  • Pressure: ---
Select document type
  • Advertising and printing products
  • Certificates
  • Technical documentation
"VENTS VUT(VUE) 250 V(H) mini" product description 02-2020 (pdf 928.62Kb)
Download high quality image "VENTS VUT(VUE) 250 H mini (ErP 2016)" (psd 3.02Mb)
Download image "VENTS VUT(VUE) 250 H mini (ErP 2016)" for your website (png 262.91Kb)
"VENTS VUT(VUE) 250 V(H) mini A12 / A1" user's manual 03-2020 (V25EN-06) (pdf 8.68Mb)
Designation key
Designation key
Series Rated air flow [m³/h] Spigot modification Model Casing colour Integrated automation system
VUT: ventilation with heat recovery
VUE: ventilation with energy recovery
250 H: horizontal mini _: aluzinc
White: white painted
А12: control panel (SRS-1)
Model G4 panel filter F8 panel filter Silencers Back valves Air dampers Clamps Summer blocks
VUT 250 H mini A12 SF 240x184x40 G4 SF 240x184x40 F8 SR 125 SRF125 KOM 125 KR 125 C 125 VL C4 200/240
VUE 250 H mini A12
Share your opinion

Is our site helpful for your business development?