This new website is under development. You are welcome to send us your feedback regarding possible errors or troubles!
Login

Privacy Policy (GDPR)
Authorization
Not registered yet? Take advantages of registration:
Products saving in a binding to the projects
Product consultation from our experts - Online
Registration
Signup
By using this form, you confirm that you have read the site terms of use Terms of use and completely accept the terms of use

VUT/VUE V2 mini EC air handling units with heat recovery

VUT/VUE V2 mini EC air handling units with heat recovery
Air handling units with air flow up to 300 m³/h. Heat recovery efficiency up to 79 %.
Model features
  • Multiple modes
  • ЕС-Motor
  • Air handling units with heat recovery
  • Description
  • Modifications
  • Capacity diagram
  • Downloads
  • Designation key
  • Accessories
Description
Description
DESCRIPTION  
  • The air handling units are the fully featured ventilation units with heat recovery for air filtration, fresh air supply and stale air extract.
  • During operation the extract air heat is transferred to the supply air stream by the highly efficient plate heat exchanger.
  • The units are designed for energy efficient ventilation of cottages and flats and are compatible with round air ducts (Ø 125 mm).
CASING  
  • Made of high-quality polymer coated white steel, internally filled with 20 mm mineral wool layer for heat and sound insulation.
  • The spigots for connection to the air ducts are located at the top of the VUT/VUE V2 mini EC unit.
FANS  
  • The units are equipped with high-efficient EC motors with an external rotor and forward curved blades.
  • These state-of-the-art motors offer the very best in energy efficiency today.
  • The high efficiency (up to 90 %) is a definite advantage of EC motors.
HEAT EXCHANGER  
  • The VUT V2 mini EC units are equipped with a cross-flow polystyrene heat exchanger.
  • In the cold season the extract air heat is captured and transferred to the supply air stream which reduces the ventilation-generated heat losses.
  • This can lead to formation of condensate that is collected in a special drain pan and discharged into the sewage system.
  • In the warm season the ambient air heat is transferred to the exhaust air stream.
  • This allows for a considerable reduction of the supply air temperature which, in turn, reduces the air conditioning load.

  • The VUE V2 mini EC units are equipped with a cross-flow heat exchanger made of polymerized cellulose.
  • In the cold season the extract air heat and moisture are transferred to the supply air stream through the enthalpy membrane reducing the heat losses from ventilation.
  • Consequently, it is the ambient air heat and moisture transferred to the exhaust air stream through the enthalpy membrane in the warm season.
  • This allows for a considerable reduction of the supply air temperature and humidity which, in turn, reduces the air conditioning load.

FILTER
  • Two built-in filters with filtration class G4 and F8 provide efficient supply air filtration.
  • Extract air is cleaned by a built-in filter with filtration class G4.
CONTROL AND AUTOMATION  
  • The VUT/VUE 300 V2 mini EC A2 unit is equipped with an A2 speed controller (R-1/010).
  • The unit is controlled by the control signal 0-10 V.

  • The VUT/VUE 300 V2 mini EC A14 unit is equipped with a remote control panel with touch buttons and LED indication.

  • The heat exchanger freeze protection operates as follows: in case of freezing danger determined by the temperature sensor the supply fan is turned off to let extract air warm up the heat exchanger.
  • After freezing danger is no longer imminent, the unit reverts to the standard operation mode.
INSTALLATION  
  • Mounting to floor or wall with fixing brackets.
  • While mounting provide free access to the service panel for filter replacement and servicing.
  • Universal casing design provides either left-handed or right-handed unit installation.
  • It requires reversing of the front and the back panels.
Modifications
+
+
Capacity diagram
Capacity diagram
  • Selection method:
  • Air flow:
  • Pressure:
Operating point
  • Air flow: --
  • Pressure: ---
Downloads
Downloads
Name
Software "Setting air handling units with automation A14 and A15" (rar 17.47Mb)
Brochure "VENTS VUT/VUE V2/H2 mini EC" (pdf 1.79Mb)
User's manual "VENTS VUT/VUE 300 V2/H2 mini EC" (pdf 11.44Mb)
Download high quality image "VENTS VUT/VUE V2 mini EC (ErP 2016, 2018)" (psd 3.96Mb)
Download image "VENTS VUT/VUE V2 mini EC (ErP 2016, 2018)" for your website (png 241.05Kb)
Designation key
Designation key
Series Rated air capacity
[m3/h]
Mounting type Casing type Type Motor type Control type
VUT: ventilation with heat recovery
VUE: ventilation with energy recovery
300 V: vertical installation 2: 20 mm insulation mini ЕС: synchronous electronically commutated motor А2: speed controller
А14: sensor control panel with LED indication
Accessories
Accessories
Model Panel filter G4 Panel filter 
F8
Indoor humidity sensor (0-10 V) Outdoor CO2 sensor with indication Outdoor COsensor Outdoor humidity sensor Kitchen hood
VUT 300 V2 mini EC A2 SF 240x184x40 G4 SF 240x184x40 F8 - - - - -
VUE 300 V2 mini EC A2
VUT 300 V2 mini EC A14 HV-2 CO2-1 CO2-2 HR-S KH-1
VUE 300 V2 mini EC A14

 

Model Silencers Back valves Air dampers Clamps Hydraulic U-trap Electric actuator
VUT 300 V2 mini EC A2 SR 125 SRF 125 КОМ 125 KRV 125 C 125 SH-32 LF230
VUE 300 V2 mini EC A2
VUT 300 V2 mini EC A14
VUE 300 V2 mini EC A14
Share your opinion
I found this page useful to select the required products easy and quick
No difficulties with the site use. Everything is logical ad clear
The site produced a nice impression

Questionnaire
Basic parameter for domestic fan selection