In today's world everything has to be slim – from low-profile rubber for a superior connection with the road to smartphones so thin you hardly feel them in your pocket to TVs that can be rolled like a yoga mat. People want their things as compact as possible to maximise their personal space and comfort.
Any customer ordering a ventilation system to fit above a dropped ceiling asks the designer to maximise the use of the space to make the ceiling as high as possible. The designer would turn to the installer for advice on components and configuration. Finally, the fate of the projects depends on the installer to source all the necessary parts and components to make it all work together.
Any project eventually turns into a tug of war between the designer and the project engineer vying for a perfect combination of design and functionality. Unfortunately, this is often a losing game for the installer since the designer often has the upper hand while the engineer turns the installer's job into a mission impossible. However, a smart installer is always a team player.
Just like VENTS. If you are in the market for the slimmest air handling units with no compromises in air capacity, look no further.
VENTS VUE P3B EC is a new air handling unit with an EC motor and an enthalpy-type heat exchanger. The unit is available in three models compatible with 100 and 150 mm air ducts for an air capacity of 180, 300 and 430 m3/h respectively.
All the models are not higher than 300 mm while the maximum rated power input is 171 W.
The units are supplied with all the necessary parts: coarse and fine filters, a heat exchanger providing heat (up to 85%) and moisture (up to 41%) recovery, EC motors, a sound-insulated casing (total sound level ranging from 32 to 46 dB(A)), automatic control equipment for smart management and a host of accessories from interchangeable filters to external CO2 sensors.
