Products
Domestic ventilation
Commercial and industrial ventilation
Decentralized ventilation units
Centralized air handling units
Smoke extraction
Air distribution
Ventilation of shelters
Downloads
Equipment selection
Contact us
About us
EN
International
EN DE RU
Ukraine
UA
United States
EN
India
EN
/ Product catalogue / Domestic ventilation / Residential axial fans / Design / LD Fresh time / 100 LD Fresh time

Vents 100 LD Fresh time

Vents 100 LD Fresh time - Axial fans for exhaust ventilation with a built-in clock
Vents 100 LD Fresh time - Axial fans for exhaust ventilation with a built-in clock
Vents 100 LD Fresh time - Axial fans for exhaust ventilation with a built-in clock
Out of production
Series: LD Fresh time
Axial fans for exhaust ventilation with a built-in clock
  • Sound pressure level LpA at 3 m: 33 dB(A)
  • Casing material: Plastic
Unit of measurement 100 LD Fresh time
Minimum supply voltage V 220
Maximum supply voltage V 240
Power supply frequency Hz 50
Rated power W 14
Unit current A 0.085
Maximum airflow m³/h 88
Sound pressure level LpA at 3 m dB(A) 33
Weight kg 0.6
Ambient air temperature min °С 1
Ambient air temperature max °С 40
Ingress protection rating - IP34
Impeller material - Plastic
Trademark Vents
Model 100 LD Fresh time
Specific energy consumption (SEC) (kWh/(m²/a)) Cold Average Warm
-30 B -14 E -5 F
Type of ventilation unit Unidirectional
Type of drive installed Multi-speed
Type of heat recovery system None
Maximum flow rate (m³/h) 88
Electric power input (W) 14
Reference flow rate (m³/s) 0.017
Specific power input (SPI) (W/(m³/h)) 0.102
Control typology Manual control
Maximum external leakage rates (%) 2.7
Sound power level (dB(A)) 53
The annual electricity consumption (AEC) (kWh/a) Cold Average Warm
100 100 100
The annual heating saved (AHS) (kWh/a) Cold Average Warm
3400 1700 800
Datasheet
"VENTS LD Fresh time" product description 01-2024
3.53 Mb
Manual
"VENTS axial fans" user's manual 2012 (V01-(D model)-02)
3.32 Mb
Image
100 LD Fresh time - image 1
315 Kb
Image
100 LD Fresh time - image 2
494 Kb
Image
100 LD Fresh time - image 3
565 Kb
Ø D B H L L1
100 152 120 135 40
Plastic
Name Photo Description
Vents MV 100 V MV 100 V Two-piece plastic grilles with angled louvers
Fittings
Name Photo Description
Vents PVT 050/10 PVT 050/10 The adhesive PVC tape is an insulation tape made of plasticized PVC base covered with a glue layer
Vents PVT 050/30 PVT 050/30 The adhesive PVC tape is an insulation tape made of plasticized PVC base covered with a glue layer
Vents PVT 050/50 PVT 050/50 The adhesive PVC tape is an insulation tape made of plasticized PVC base covered with a glue layer
Vents C 100 C 100 The clamps are designed for quick and reliable mounting and connection of various round ventilation system components. Clamps are made of stainless steel band
Round
Name Photo Description
Vents 1805 1805 Wall mounting
Flexible ducts
Name Photo Description
Vents Polyvent N Polyvent N Flexible uninsulated air duct made of metallized film
Backdraft dampers
Name Photo Description
Vents KO 100 KO 100 Back valve is designed for domestic fan
Vents KO1 100 KO1 100 Back valve is designed for domestic fan
Window vents
Name Photo Description
Vents PO 400 PO 400 Window ventilators for supply ventilation
Plastic
Name Photo Description
Vents MV 102 VK MV 102 VK Supply and exhaust hoods
Metal
Name Photo Description
Vents MVM 102 V N MVM 102 V N Exhaust metal hoods