| Unit of measurement | Quiet 125 T | |
| Connected air duct size | mm | 125 |
| Phases | - | 1 |
| Minimum supply voltage | V | 220 |
| Maximum supply voltage | V | 240 |
| Power supply frequency | Hz | 50 |
| Rated power | W | 17 |
| Unit current | A | 0.11 |
| Maximum airflow | m³/h | 185 |
| Rotation speed at 50hz | - | 2100 |
| Sound pressure level LpA at 3 m | dB(A) | 32 |
| Weight | kg | 0.78 |
| Ambient air temperature min | °С | 1 |
| Ambient air temperature max | °С | 40 |
| Ingress protection rating | - | IP45 |
| Impeller material | - | Plastic |
| Trademark | Vents | |||||
| Model | Quiet 125 T | |||||
| Specific energy consumption (SEC) (kWh/(m²/a)) | Cold | Average | Warm | |||
| -30.7 | B | -14.3 | E | -4.9 | F | |
| Type of ventilation unit | Unidirectional | |||||
| Type of drive installed | Single speed | |||||
| Type of heat recovery system | None | |||||
| Maximum flow rate (m³/h) | 185 | |||||
| Electric power input (W) | 17 | |||||
| Reference flow rate (m³/s) | 0.036 | |||||
| Specific power input (SPI) (W/(m³/h)) | 0.092 | |||||
| Control typology | Manual control | |||||
| Maximum external leakage rates (%) | 2.7 | |||||
| Declared typology | RVU UVU | |||||
| Sound power level (dB(A)) | 52 | |||||
| The annual electricity consumption (AEC) (kWh/a) | Cold | Average | Warm | |||
| 115 | 115 | 115 | ||||
| The annual heating saved (AHS) (kWh/a) | Cold | Average | Warm | |||
| 3355 | 1715 | 776 | ||||
| ØD | B | H | L | L1 |
|---|---|---|---|---|
| 123.5 | 182 | 158 | 91 | 27 |
| Name | Photo | Description |
|---|---|---|
| Vents RS-1-0,5 |
|
Used in ventilation systems for switching on/off and speed control of single-phase fan motors with voltage control |
| Name | Photo | Description |
|---|---|---|
| Vents MV 120 V |
|
Two-piece plastic grilles with angled louvers |
| Name | Photo | Description |
|---|---|---|
| Vents PVT 050/10 |
|
The adhesive PVC tape is an insulation tape made of plasticized PVC base covered with a glue layer |
| Vents PVT 050/30 |
|
The adhesive PVC tape is an insulation tape made of plasticized PVC base covered with a glue layer |
| Vents PVT 050/50 |
|
The adhesive PVC tape is an insulation tape made of plasticized PVC base covered with a glue layer |
| Vents C 125 |
|
The clamps are designed for quick and reliable mounting and connection of various round ventilation system components. Clamps are made of stainless steel band |
| Name | Photo | Description |
|---|---|---|
| Vents 2805 |
|
Wall mounting |
| Name | Photo | Description |
|---|---|---|
| Vents Polyvent N |
|
Flexible uninsulated air duct made of metallized film |
| Name | Photo | Description |
|---|---|---|
| Vents KO 125 |
|
Back valve is designed for domestic fan |
| Name | Photo | Description |
|---|---|---|
| Vents PO 400 |
|
Window ventilators for supply ventilation |
| Name | Photo | Description |
|---|---|---|
| Vents MV 122 VK |
|
Supply and exhaust hoods |
| Name | Photo | Description |
|---|---|---|
| Vents MVM 122 V N |
|
Exhaust metal hoods |
