Login

Privacy Policy (GDPR)
Authorization
Not registered yet? Take advantages of registration:
Products saving in a binding to the projects
Product consultation from our experts - Online
Registration
Signup
By using this form, you confirm that you have read the site terms of use Terms of use and completely accept the terms of use

VENTS VUT 1000 H

  • Description
  • Characteristics
  • Downloads
  • Dimensions
  • Additional diagrams
  • Legend
Description
Description
DESCRIPTION
  • Air handling unit VUT H is a complete ventilation units designed for air filtration and supply to the premises and exhaust air removal.

  • During the operation process the extract air heat is transferred to the supply air through the plate heat exchanger.

  • All the models are designed for connection with Ø 125, 150, 160, 200, 250, 315 mm round ducts.

CASING
  • The casing is made of aluminium profile, double skinned with 20 mm mineral wool heat-and sound-insulating layer.

FILTER
  • Two incorporated G4 panel filters for extract air ventilation and F7 filters for supply air ventilation are supplied with the unit.

FANS
  • The unit is equipped with supply and exhaust centrifugal double-inlet fans with forward curved blades and built-in thermal overheating protection with automatic restart.

  • The electric motors and impellers are dynamically balanced in two planes.
  • The ball-bearings used with motors are designed for at least 40 000 hours operation and are maintenance-free.
HEAT EXHANGER  
  • The cross-flow air-to-air heat exchanger block is manufactured from aluminum plates.

  • Whenever heat recovery is not required the heat exchanger block can be easily replaced by a “summer” block.

  • The unit is also equipped with the drain pan for condensate water drainage as well as built-in freezing protection system. Its operating principle is based on switching the supply fan off as the temperature sensor requires. Warm extract air heats the heat exchanger. Then the supply fan switches on and the unit continues operating under rated conditions.
CONTROL  
  • The motor speed is controlled by means of 4-step control switch by means of selecting the minimum, average or maximum speed or the unit shutdown.

Offered options to the units
SF VL
   
Type G4 replaceable filter F7 replaceable filter Summer block
VUT 350 H SF VUT 350-600 H G4 СФ ВУТ 350-600 Г F7 VL VUT 350 H
VUT 500 H VL VUT 500-600 H
VUT 530 H VL VUT 500-600 H
VUT 600 H VL VUT 500-600 H
VUT 1000 H SF VUT 1000 H G4 SF VUT 1000 H F7 VL VUT 1000 H
VUT 2000 H SF VUT 2000 H G4 SF VUT 2000 H F7 VL VUT 2000 H
   
MOUNTING  
  • Air handling unit is mounted on the floor and suspended to the ceiling by means of a seat angle with anti-vibration mounts or attached to a wall with brackets.

  • The unit can be mounted either in service spaces or in main premises above the suspended ceiling, in the pocket or can be placed directly in the room.

  • Mounting in any position shall provide correct condensate drainage.

  • Access for the fan maintenance and filter cleaning shall be provided from outside of the side panels.

VENTS VUT H unit air exchange example in the flat
Characteristics
Characteristics
Parameter VUT 1000 H
Measurement unit
Frequency 50 Hz
Engine Type 220В / 50Гц -
Phase 1 ˜
Voltage 220-240 V
Maximum fan power Maximum fan power 2шт. х 410 W
Air capacity 1200 m³/h
Maximum air capacity 1200 m³/h
Fan current Fan current 2шт. х 1.8 A
Total unit power 820 W
Total unit current 3.6 A
RPM 1850 min-1
Heat recovery efficiency 88 -
Noize level at 3 m 60 dBА
Casing material aluzinc -
Maximum transported air temperature Maximum transported air temperature -25 +40 °С
Heating without heating -
Insulation 50 mm, mineral wool -
Filter: extract G4 -
Filter: supply * option G4 (F7*) -
Connected air duct diameter 250 mm
Mass 85 kg
SEC Class - -
Connection diameter 250 mm
Heat recovery efficiency Heat recovery efficiency 88 %
Heat exchanger type cross-flow -
Heat exchanger material алюминий -
Duct connection Duct connection горизонтальное -
Type Type приточно-вытяжная с рекуперацией -
Heat recovery Heat recovery 1 -
Mounting floor mounting -
Files archieve
Downloads
Name
Certificate LVD "VUT H" (pdf 225.03Kb)
Certificate CB Test Report "VUT H" (pdf 11.93Mb)
Certificate GS "VUT H" (pdf 224.05Kb)
Brochure "VENTS VUT H" (pdf 258.76Kb)
Download high quality image "VENTS VUT H (ErP 2016)" (psd 4.38Mb)
User's manual "VENTS VUT H" (pdf 2.13Mb)
Declaration of сonformity "VUT H" (pdf 1.57Mb)
Download image "VENTS VUT H (ErP 2016)" for your website (png 371.07Kb)
Dimensions
Characteristics
VENTS VUT 1000 H
Parameter Value Measurement unit
∅D 248 mm
B 548 mm
B1 496 mm
B2 60 mm
B3 213 mm
H 794 mm
H1 290 mm
H2 200 mm
L1 850 mm
Additional diagrams
Additional diagrams
Sound-power level   Octave-frequency band [Hz]
  Hz   General   63   125   250   500   1000   2000   4000   8000
LwA to inlet   dBA 67 70 66 66 67 63 62 60 56
LwA to outlet dBA 70 70 70 68 68 66 62 59 57
LwA to environment dBA 46 57 54 49 54 39 39 54 32

Legend
Legend
Series   Rated air capacity, m3/h   Duct connection
VENTS VUT   350; 500; 530; 600; 1000; 2000   H - horizontal
Share your opinion
I found this page useful to select the required products easy and quick
No difficulties with the site use. Everything is logical ad clear
The site produced a nice impression

Questionnaire
Please evaluate our updated site user friendliness