Unit of measurement | VUT 300-2 E2V EC | |
Connected air duct size | mm | 160 |
Phases | - | 1 |
Minimum supply voltage | V | 230 |
Maximum supply voltage | V | 230 |
Power supply frequency | Hz | 50 |
Rated power | W | 212 |
Power of electrical reheater | W | 4000 |
Unit current | A | 18.8 |
Maximum airflow | m3/h | 300 |
Sound pressure level LpA at 3 m | dB(A) | 37 |
Heat recovery efficiency, max | % | 95 |
Heat exchanger type | - | Counter flow |
Heat exchanger material | - | Polystyrene |
Weight | kg | 38 |
Extract filter | - | G4 |
Supply filter | - | G4 (F7 опция), G4 (F7 option) |
Transported air temperature (max) | °С | 60 |
Transported air temperature (min) | °С | -39 |
Ambient air temperature min | °С | 1 |
Ambient air temperature max | °С | 40 |
Ambient air humidity max | % | 80 |
Ingress protection rating | - | IP22 |
Ingress protection rating of the drive | - | IP44 |
Trademark | Vents | |||||
Model | VUT 300-2 E2V EC | |||||
Specific energy consumption (SEC) (kWh/(m2/a)) | Cold | Average | Warm | |||
-78.6 | A+ | -39.3 | A | -14.1 | E | |
Type of ventilation unit | Bidirectional | |||||
Type of drive installed | Variable speed | |||||
Type of heat recovery system | Recuperative | |||||
Thermal efficiency of heat recovery (%) | 89 | |||||
Maximum flow rate (m3/h) | 270 | |||||
Electric power input (W) | 205 | |||||
Reference flow rate (m3/s) | 0.053 | |||||
Reference pressure difference (Pa) | 50 | |||||
Specific power input (SPI) (W/(m3/h)) | 0.529 | |||||
Control typology | Local demand control | |||||
Maximum internal leakage rates (%) | 2.7 | |||||
Maximum external leakage rates (%) | 2.7 | |||||
Sound power level (dB(A)) | 57 | |||||
Declared typology | RVU BVU | |||||
The annual electricity consumption (AEC) (kWh/a) | Cold | Average | Warm | |||
862 | 325 | 280 | ||||
The annual heating saved (AHS) (kWh/a) | Cold | Average | Warm | |||
9141 | 4673 | 2113 |
∅D | A1 |
---|---|
160 | 403 |
Name | Photo | Description |
---|---|---|
Vents SR 160/600 | Silencer is applied for noise absorption produced during the ventilating equipment operation and spread along the ducting systems | |
Vents SR 160/900 | Silencer is applied for noise absorption produced during the ventilating equipment operation and spread along the ducting systems | |
Vents SR 160/1200 | Silencer is applied for noise absorption produced during the ventilating equipment operation and spread along the ducting systems | |
Vents SRF 160/600 | Silencer is applied for noise absorption produced during the ventilating equipment operation and spread along the ducting systems | |
Vents SRF 160/900 | Silencer is applied for noise absorption produced during the ventilating equipment operation and spread along the ducting systems | |
Vents SRF 160/2000 | Silencer is applied for noise absorption produced during the ventilating equipment operation and spread along the ducting systems |
Name | Photo | Description |
---|---|---|
Vents KOM 160 | Spring-loaded backdraft damper for round ducts | |
Vents KOMu 160 | Spring-loaded backdraft damper for round ducts |
Name | Photo | Description |
---|---|---|
Vents CO2-1 | CO2 sensors | |
Vents CO2-2 | CO2 sensors |
Name | Photo | Description |
---|---|---|
Vents Belimo LF24 | The Belimo LF series actuators are designed for controlling air dampers with cross section up to 0.8 m² performing protection functions | |
Vents Belimo LF230 | The Belimo LF series actuators are designed for controlling air dampers with cross section up to 0.8 m² performing protection functions | |
Vents Belimo TF24 | The actuators are designed for controlling air dampers with cross section up to 0.4 m² performing protection functions | |
Vents Belimo TF230 | The actuators are designed for controlling air dampers with cross section up to 0.4 m² performing protection functions |
Name | Photo | Description |
---|---|---|
Vents C 160 | The clamps are designed for quick and reliable mounting and connection of various round ventilation system components. Clamps are made of stainless and galvanized steel band |